CD4017BCN - National Semiconductor

TL/F/5950

CD4017BM/CD4017BC Decade Counter/Divider with 10 Decoded Outputs

CD4022BM/CD4022BC Divide-by-8 Counter/Divider with 8 Decoded Outputs

March 1988

CD4017BM/CD4017BC Decade Counter/Divider

with 10 Decoded Outputs

CD4022BM/CD4022BC Divide-by-8 Counter/Divider

with 8 Decoded Outputs

General Description

The CD4017BM/CD4017BC is a 5-stage divide-by-10 John-

son counter with 10 decoded outputs and a carry out bit.

The CD4022BM/CD4022BC is a 4-stage divide-by-8 John-

son counter with 8 decoded outputs and a carry-out bit.

These counters are cleared to their zero count by a logical

‘‘1’’ on their reset line. These counters are advanced on the

positive edge of the clock signal when the clock enable sig-

nal is in the logical ‘‘0’’ state.

The configuration of the CD4017BM/CD4017BC and

CD4022BM/CD4022BC permits medium speed operation

and assures a hazard free counting sequence. The 10/8

decoded outputs are normally in the logical ‘‘0’’ state and go

to the logical ‘‘1’’ state only at their respective time slot.

Each decoded output remains high for 1 full clock cycle.

The carry-out signal completes a full cycle for every 10/8

clock input cycles and is used as a ripple carry signal to any

succeeding stages.

Features

YWide supply voltage range 3.0V to 15V

YHigh noise immunity 0.45 VDD (typ.)

YLow power Fan out of 2 driving 74L

TTL compatibility or 1 driving 74LS

YMedium speed operation 5.0 MHz (typ.)

with 10V VDD

YLow power 10 mW (typ.)

YFully static operation

Applications

YAutomotive

YInstrumentation

YMedical electronics

YAlarm systems

YIndustrial electronics

YRemote metering

Connection Diagrams

CD4017B

Dual-In-Line Package

TL/F/5950–1

Top View

CD4022B

Dual-In-Line Package

TL/F/5950–2

Top View

Order Number CD4017B or CD4022B

C1995 National Semiconductor Corporation RRD-B30M105/Printed in U. S. A.

Absolute Maximum Ratings (Notes1&2)

If Military/Aerospace specified devices are required,

please contact the National Semiconductor Sales

Office/Distributors for availability and specifications.

DC Supply Voltage (VDD)b0.5 VDC to a18 VDC

Input Voltage (VIN)b0.5 VDC to VDD a0.5 VDC

Storage Temperature (TS)b65§Ctoa

150§C

Power Dissipation (PD)

Dual-In-Line 700 mW

Small Outline 500 mW

Lead Temperature (TL)

(Soldering, 10 seconds) 260§C

Recommended Operating

Conditions (Note 2)

DC Supply Voltage (VDD)a3V

DC to a15 VDC

Input Voltage (VIN) 0 to VDD VDC

Operating Temperature Range (TA)

CD4017BM, CD4022BM b55§Ctoa

125§C

CD4017BC, CD4022BC b40§Ctoa

85§C

DC Electrical Characteristics CD4017BM, CD4022BM (Note 2)

Symbol Parameter Conditions b55§Ca25§a125§CUnits

Min Max Min Typ Max Min Max

IDD Quiescent Device VDD e5V, VIN eVDD or VSS 5 0.3 5 150 mA

Current VDD e10V, VIN eVDD or VSS 10 0.5 10 300 mA

VDD e15V, VIN eVDD or VSS 20 1.0 20 600 mA

VOL Low Level

k1.0 mA

Output Voltage VDD e5V 0.05 0 0.05 0.05 V

VDD e10V 0.05 0 0.05 0.05 V

VDD e15V 0.05 0 0.05 0.05 V

VOH High Level

k1.0 mA

Output Voltage VDD e5V 4.95 4.95 5 4.95 V

VDD e10V 9.95 9.95 10 9.95 V

VDD e15V 14.95 14.95 15 14.95 V

VIL Low Level

k1.0 mA

Input Voltage VDD e5V, VOe0.5V or 4.5V 1.5 1.5 1.5 V

VDD e10V, VOe1.0V or 9.0V 3.0 3.0 3.0 V

VDD e15V, VOe1.5V or 13.5V 4.0 4.0 4.0 V

VIH High Level

k1.0 mA

Input Voltage VDD e5V, VOe0.5V or 4.5V 3.5 3.5 3.5 V

VDD e10V, VOe1.0V or 9.0V 7.0 7.0 7.0 V

VDD e15V, VOe1.5V or 13.5V 11.0 11.0 11.0 V

IOL Low Level Output VDD e5V, VOe0.4V 0.64 0.51 0.88 0.36 mA

Current (Note 3) VDD e10V, VOe0.5V 1.6 1.3 2.25 0.9 mA

VDD e15V, VOe1.5V 4.2 3.4 8.8 2.4 mA

IOH High Level Output VDD e5V, VOe4.6V b0.25 b0.2 b0.36 b0.14 mA

Current (Note 3) VDD e10V, VOe9.5V b0.62 b0.5 b0.9 b0.35 mA

VDD e15V, VOe13.5V b1.8 b1.5 b3.5 b1.1 mA

IIN Input Current VDD e15V, VIN e0V b0.1 b10b5b0.1 b1.0 mA

VDD e15V, VIN e15V 0.1 10b50.1 1.0 mA

DC Electrical Characteristics CD4017BC, CD4022BC (Note 2)

Symbol Parameter Conditions b40§Ca25§a85§CUnits

Min Max Min Typ Max Min Max

IDD Quiescent Device VDD e5V 20 0.5 20 150 mA

Current VDD e10V 40 1.0 40 300 mA

VDD e15V 80 5.0 80 600 mA

VOL Low Level

k1.0 mA

Output Voltage VDD e5V 0.05 0 0.05 0.05 V

VDD e10V 0.05 0 0.05 0.05 V

VDD e15V 0.05 0 0.05 0.05 V

VOH High Level

k1.0 mA

Output Voltage VDD e5V 4.95 4.95 5 4.95 V

VDD e10V 9.95 9.95 10 9.95 V

VDD e15V 14.95 14.95 15 14.95 V

Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices

should be operated at these limits. The table of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provides conditions for actual device

operation.

Note 2: VSS e0V unless otherwise specified.

Note 3: IOL and IOH are tested one output at a time.

DC Electrical Characteristics CD4017BC, CD4022BC (Note 2) (Continued)

Symbol Parameter Conditions b40§Ca25§a85§CUnits

Min Max Min Typ Max Min Max

VIL Low Level

k1.0 mA

Input Voltage VDD e5V, VOe0.5V or 4.5V 1.5 1.5 1.5 V

VDD e10V, VOe1.0V or 9.0V 3.0 3.0 3.0 V

VDD e15V, VOe1.5V or 13.5V 4.0 4.0 4.0 V

VIH High Level

k1.0 mA

Input Voltage VDD e5V, VOe0.5V or 4.5V 3.5 3.5 3.5 V

VDD e10V, VOe1.0V or 9.0V 7.0 7.0 7.0 V

VDD e15V, VOe1.5V or 13.5V 11.0 11.0 11.0 V

IOL Low Level Output VDD e5V, VOe0.4V 0.52 0.44 0.88 0.36 mA

Current (Note 3) VDD e10V, VOe0.5V 1.3 1.1 2.25 0.9 mA

VDD e15V, VOe1.5V 3.6 3.0 8.8 2.4 mA

IOH High Level Output VDD e5V, VOe4.6V b0.2 b0.16 b0.36 b0.12 mA

Current (Note 3) VDD e10V, VOe9.5V b0.5 b0.4 b0.9 b0.3 mA

VDD e15V, VOe13.5V b1.4 b1.2 b3.5 b1.0 mA

IIN Input Current VDD e15V, VIN e0V b0.3 b10b5b0.3 b1.0 mA

VDD e15V, VIN e15V 0.3 10b50.3 1.0 mA

Note 1: ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices

should be operated at these limits. The table of ‘‘Recommended Operating Conditions’’ and ‘‘Electrical Characteristics’’ provides condtions for actual device

operation.

Note 2: VSS e0V unless otherwise specified.

Note 3: IOL and IOH are tested one output at a time.

AC Electrical Characteristics*

TAe25§C, CLe50 pF, RLe200k, trCL and tfCL e20 ns, unless otherwise specified

Symbol Parameter Conditions Min Typ Max Units

CLOCK OPERATION

tPHL, tPLH Propagation Delay Time

Carry Out Line VDD e5V 415 800 ns

VDD e10V 160 320 ns

VDD e15V 130 250 ns

Carry Out Line VDD e5V 240 480 ns

VDD e10V CLe15 pF 85 170 ns

VDD e15V (70 140 ns

Decode Out Lines VDD e5V 500 1000 ns

VDD e10V 200 400 ns

VDD e15V 160 320 ns

tTLH,t

THL Transition Time Carry Out

and Decode Out Lines

tTLH VDD e5V 200 360 ns

VDD e10V 100 180 ns

VDD e15V 80 130 ns

tTHL VDD e5V 100 200 ns

VDD e10V 50 100 ns

VDD e15V 40 80 ns

fCL Maximum Clock Frequency VDD e5V Measured with 1.0 2 MHz

VDD e10V Respect to Carry 2.5 5 MHz

VDD e15V (Output Line 3.0 6 MHz

tWL,t

WH Minimum Clock VDD e5V 125 250 ns

Pulse Width VDD e10V 45 90 ns

VDD e15V 35 70 ns

trCL,t

fCL Clock Rise and VDD e5V 20 ms

Fall Time VDD e10V 15 ms

VDD e15V 5 ms

tSU Minimum Clock Inhibit VDD e5V 120 240 ns

Data Setup Time VDD e10V 40 80 ns

VDD e15V 32 65 ns

CIN Average Input Capacitance 5 7.5 pF

AC Electrical Characteristics*

TAe25§C, CLe50 pF, RLe200k, trCL and tfCL e20 ns, unless otherwise specified

Symbol Parameter Conditions Min Typ Max Units

RESET OPERATION

tPHL, tPLH Propagation Delay Time

Carry Out Line VDD e5V 415 800 ns

VDD e10V 160 320 ns

VDD e15V 130 250 ns

Carry Out Line VDD e5V 240 480 ns

VDD e10V CLe15 pF 85 170 ns

VDD e15V (70 140 ns

Decode Out Lines VDD e5V 500 1000 ns

VDD e10V 200 400 ns

VDD e15V 160 320 ns

tWMinimum Reset VDD e5V 200 400 ns

Pulse Width VDD e10V 70 140 ns

VDD e15V 55 110 ns

tREM Minimum Reset VDD e5V 75 150 ns

Removal Time VDD e10V 30 60 ns

VDD e15V 25 50 ns

*AC Parameters are guaranteed by DC correlated testing.

Timing Diagrams

CD4017B

TL/F/5950–3

Timing Diagrams (Continued)

CD4022B

TL/F/5950–4

Logic Diagrams

CD4017B

Terminal No. 8 eGND TL/F/5950 – 5

Terminal No. 16 eVDD

CD4022B

Terminal No. 16 eVDD TL/F/5950 – 6

Terminal No. 8 eGND

Physical Dimensions inches (millimeters)

Ceramic Dual-In-Line Package (J)

Order Number CD4017BMJ, CD4017BCJ, CD4022BMJ, CD4022BCJ

NS Package Number J16A

CD4017BM/CD4017BC Decade Counter/Divider with 10 Decoded Outputs

CD4022BM/CD4022BC Divide-by-8 Counter/Divider with 8 Decoded Outputs

Physical Dimensions inches (millimeters) (Continued)

Molded Dual-In-Line Package (N)

Order Number CD4017BMN, CD4017BCN, CD4022BMN, CD4022BCN

NS Package Number N16E

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL

SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life

systems which, (a) are intended for surgical implant support device or system whose failure to perform can

into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life

failure to perform, when properly used in accordance support device or system, or to affect its safety or

with instructions for use provided in the labeling, can effectiveness.

be reasonably expected to result in a significant injury

to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.

1111 West Bardin Road Fax: (

49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309

Arlington, TX 76017 Email: cnjwge

tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408

Tel: 1(800) 272-9959 Deutsch Tel: (

49) 0-180-530 85 85 Tsimshatsui, Kowloon

Fax: 1(800) 737-7018 English Tel: (

49) 0-180-532 78 32 Hong Kong

Fran3ais Tel: (

49) 0-180-532 93 58 Tel: (852) 2737-1600

Italiano Tel: (

49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.