1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com
56
OX/OY Series
Ceramic Composition
10% Tolerance
Series Watts max.* Resistance range Joules max.** Max. working volts
OX 1 3.3Ω-100K 50 300
OY 2 3.3Ω-1M 80 400
* at 70°C. **For a single impulse.
Test Condition Maximum ∆R
Life Test MIL-STD-202, Method 108 ±5%
Short Time Overload 2x rated V, 5 sec ON @ 70°C ±(2% +0.05Ω)
Resistance to Pulse120,000 cycles. See circuit for test
conditions
±5%
Thermal Shock MIL-STD-202, Method 107 ±(2% ±0.05Ω)
Moisture Resistance 1000 hrs @ 40°C,
90 - 95% RH
±5%
Resistance to Pulse
�R/R
Cycles
0.60%
0.20%
0.00% 100 10,0000 1,000 20,000
0.40%
10 Kohms
1 Kohm
100 ohms
0.80%
�R/R
Cycles
0.60%
0.20%
0.00% 100 10,0000 1,000 20,000
0.40%
10 Kohms
1 Kohm
100 ohms
0.80% DC 20KV
see circuit for
test conditions
OX Series
OY Series
DC 14KV
see circuit for
test conditions
The OX/OY Series of fixed
ceramic resistors are ideal for
circuitry associated with surges,
high peak power or high energy.
They offer enhanced perfor-
mance in high voltage power
supplies, R-C snubber circuits,
and inrush limiters. The OX/
OY resistors can often replace
carbon composition resistors
which can be difficult to source.
FEATURES
•Replaces1and2watt
carbon composition
resistors
•Meetshighenergy
density demands
•Highpeakpower
•10%Tolerance
Terminals Pb-free solder-coated axial
Coating Silicone ceramic
Derating Linear from 100% @ +70°C to
0% @ +200°C
Operating Temp.
Range
-40°C to +220°C
Tolerance ±10% standard
Power Rating Based on 70°C free air rating
Temperature
Coefficient
-1300 ±300ppm/°C.
SERIES SPECIFICATIONS
CHARACTERITICS
OX OY
Max Working Voltage 300V 400V
Dielectric Strength 500V 700V
Max Overload Voltage 600V 800V
Max Pulse Voltage114KV 20KV
Pulse Tolerance,
100 pulses
1240V @ 52µF,
40J/ 35 sec.
1640V @ 52µF,
70J/35 sec.
1See figures
1000 pF R.U.T.
Max. Pulse
Voltage
10 kohm
1 sec. on / 1 sec. off
14KV and 20KV val-
ues used in circuit as
shown; full voltage
not applied directly to
resistor.
(continued)
1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com 57
Ohm Value
Example:
33G = 3.3 Ohms
330 = 33 Ohms
331 = 330 Ohms
Tolerance
K= 10% Standard
Size
OX =1W
OY =2W
RoHS Compliant
Packaging
TR = tape & reel
B = bulk
OX82GKE-TR
*approx. 27mm for
taped & reeled units
LD
1.50" ±.118
38.0mm ±3* 0.031" nom.
(0.8mm)
C
3"
13"
ø 1.13"
2.88"
6.2mm ±.5
63mm ±1
2.5mm
max.
L1L2
L1 – L2 = 1mm max.
0.80mm
max.
10.16mm ±.80
Tape and Reel Dimensions
Length L Length C Diameter D Qty. per
Series ±.039 (±1.0) max. ±.039 (±1.0) reel
OX 0.65 / 16.5 0.748 / 19.0 0.217 / 5.5 1000
OY 0.748 / 19.0 0.886 / 22.5 0.276 / 7.0 500
OX/OY Series
Ceramic Composition
10% Tolerance
ORDERING INFORMATION
DIMENSIONS
in./mm
Standard part numbers for OX/OY Series
3.3 ––33GKE
3.9 ––39GKE
4.7 ––47GKE
5.6 ––56GKE
6.8 ––68GKE
8.2 ––82GKE
10 ––100KE
12 ––120KE
15 ––150KE
18 ––180KE
22 ––220KE
Ohmic value
OX– 1
OY– 2
Wattage
Part No.
Prefix
Suffix
Ohmic value
OX– 1
OY– 2
Wattage
Part No.
Prefix
Suffix
Ohmic value
OX– 1
OY– 2
Wattage
Part No.
Prefix
Suffix
Ohmic value
OX– 1
OY– 2
Wattage
Part No.
Prefix
Suffix
Ohmic value
OX– 1
OY– 2
Wattage
Part No.
Prefix
Suffix
Ohmic value
OX– 1
OY– 2
Wattage
Part No.
Prefix
Suffix
27 ––270KE
33 ––330KE
39 ––390KE
47 ––470KE
56 ––560KE
68 ––680KE
82 ––820KE
100 ––101KE
120 ––121KE
150 ––151KE
180 ––181KE
220 ––221KE
270 ––271KE
330 ––331KE
390 ––391KE
470 ––471KE
560 ––561KE
680 ––681KE
820 ––821KE
1000 ––102KE
1200 ––122KE
1500 ––152KE
1800 ––182KE
2200 ––222KE
2700 ––272KE
3300 ––332KE
3900 ––392KE
4700 ––472KE
5600 ––562KE
6800 ––682KE
8200 ––822KE
10000 ––103KE
12000 ––123KE
15000 ––153KE
18000 ––183KE
22000 ––223KE
27000 ––273KE
33000 ––333KE
39000 ––393KE
47000 ––473KE
56000 ––563KE
68000 ––683KE
82000 ––823KE
100000 ––104KE
120000 ––124KE
150000 ––154KE
180000 ––184KE
220000 ––224KE
270000 ––274KE
330000 ––334KE
390000 ––394KE
470000 ––474KE
560000 ––564KE
680000 ––684KE
820000 ––824KE
1MEG ––105KE
