SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226
T-1 (3mm) SOLID STATE LAMP
Part Number: WP710A10SECK/J4
Super Bright Orange
Features
zLow power consumption.
zPopular T-1 diameter package.
zGeneral purpose leads.
zReliable and rugged.
zLong life - solid state reliability.
zAvailable on tape and reel.
zRoHS compliant.
Description
The Orange source color devices are made with AlGaInP
Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
*Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
3. 5mm below package base.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
WP710A10SECK/J4 Super Bright Orange (AlGaInP) Water Clear
2700 4000
*1500 *3000
34°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Orange 611 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Orange 605 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Orange 17 nm IF=20mA
C Capacitance Super Bright Orange 27 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Orange 2.2 2.8 V IF=20mA
IR Reverse Current Super Bright Orange 10 uA VR = 5V
Parameter Super Bright Orange Units
Power dissipation 84 mW
DC Forward Current 30 mA
Peak Forward Current [1] 150 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3 Seconds
Lead Solder Temperature [3] 260°C For 5 Seconds
SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226
Super Bright Orange WP710A10SECK/J4
SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226
PACKING & LABEL SPECIFICATIONS WP710A10SECK/J4
SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226
SPEC NO: DSAN0513 REV NO: V.1A DATE: JUN/14/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.N.Huang ERP: 1101032226
All design applications should refer to Kingbright application notes available at
http://www.KingbrightUSA.com/ApplicationNotes
