Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ XB
– EE162 –
φD+1.0 max.
1.5±0.2
2.0 max. Terminal
(t=0.8)
4.0±0.5
4.0±0.5
(3.5)
Top of spin
Standard terminal type does not require
terminal trimming process.
L+2.0 max.
(10.0)
10.0±0.1
2-φ2.0±0.1
Sleeve
Vent
Polarity bar
Recommended PWB piercing plan
0.8+0.2
–0.1
(φD)
Rated voltage etc. indicate to sleeve.
■Features
● Endurance : 105 °C 7000 h
● RoHS directive compliant
Snap-in Type
Series: XB Type: TS
■Specifi cations
■Di men sions in mm (not to scale)
Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 160 V.DC to 250 V.DC 315 V.DC to 450 V.DC
Nominal Cap. Range 180 µF to 2200 µF 39 µF to 680 µF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent 3앀CV (µA) max. After 5 minutes application of rated working voltage at +20 °C.
C : Capacitance (µF) V: W.V. (V.DC)
tan δPlease see the attached standard products list
Frequency Correction
Factor for Ripple Current
Frequency (Hz) 50 60 100 120 500 1 k 10 k to
Correction Factor 0.75 0.80 0.95 1.00 1.20 1.25 1.40
Endurance
After 7000 hours application of DC voltage with specifi ed ripple current (< rated DC working voltage)
at +105 °C±2 °C, the capacitors shall meet the following limits.
Capacitance change <±20 % of initial measured value
tan δ< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized
at +20 °C, capacitor shall meet the limits specifi ed in Endurance (With voltage treatment)
(mm)
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ XB
– EE163 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
160
270 22 25 EETXB2C271HJ 1.10 0.15 200
330 22 30 EETXB2C331HJ 1.20 0.15 200
390 22 30 EETXB2C391HJ 1.30 0.15 200
25 25 EETXB2C391JJ 1.30 0.15 200
470 22 35 EETXB2C471HJ 1.40 0.15 200
25 30 EETXB2C471JJ 1.40 0.15 200
560
22 40 EETXB2C561HJ 1.50 0.15 200
25 30 EETXB2C561JJ 1.50 0.15 200
30 25 EETXB2C561KJ 1.50 0.15 200
680
22 45 EETXB2C681HJ 1.70 0.15 200
25 35 EETXB2C681JJ 1.70 0.15 200
30 30 EETXB2C681KJ 1.70 0.15 200
820 25 40 EETXB2C821JJ 2.00 0.15 200
30 30 EETXB2C821KJ 2.00 0.15 200
1000 25 45 EETXB2C102JJ 2.20 0.15 200
30 35 EETXB2C102KJ 2.20 0.15 100
1200
25 50 EETXB2C122JJ 2.30 0.15 200
30 40 EETXB2C122KJ 2.30 0.15 100
35 35 EETXB2C122LJ 2.30 0.15 100
1500 30 45 EETXB2C152KJ 2.50 0.15 100
35 35 EETXB2C152LJ 2.50 0.15 100
1800 30 50 EETXB2C182KJ 2.70 0.15 100
35 40 EETXB2C182LJ 2.70 0.15 100
2200 35 50 EETXB2C222LJ 2.90 0.15 100
180
220 22 25 EETXB2P221HJ 1.00 0.15 200
270 22 25 EETXB2P271HJ 1.10 0.15 200
330 22 30 EETXB2P331HJ 1.20 0.15 200
25 25 EETXB2P331JJ 1.20 0.15 200
390 22 30 EETXB2P391HJ 1.30 0.15 200
25 25 EETXB2P391JJ 1.30 0.15 200
470
22 35 EETXB2P471HJ 1.40 0.15 200
25 30 EETXB2P471JJ 1.40 0.15 200
30 25 EETXB2P471KJ 1.40 0.15 200
560
22 40 EETXB2P561HJ 1.50 0.15 200
25 35 EETXB2P561JJ 1.50 0.15 200
30 25 EETXB2P561KJ 1.50 0.15 200
680
22 50 EETXB2P681HJ 1.70 0.15 200
25 40 EETXB2P681JJ 1.70 0.15 200
30 30 EETXB2P681KJ 1.70 0.15 200
820
25 45 EETXB2P821JJ 2.00 0.15 200
30 35 EETXB2P821KJ 2.00 0.15 100
35 30 EETXB2P821LJ 2.00 0.15 200
1000 30 40 EETXB2P102KJ 2.20 0.15 100
35 30 EETXB2P102LJ 2.20 0.15 200
1200 30 45 EETXB2P122KJ 2.30 0.15 100
35 35 EETXB2P122LJ 2.30 0.15 100
1500 30 50 EETXB2P152KJ 2.50 0.15 100
35 40 EETXB2P152LJ 2.50 0.15 100
1800 35 45 EETXB2P182LJ 2.70 0.15 100
2200 35 50 EETXB2P222LJ 2.90 0.15 100
Endurance : 105 °C 7000 h, Terminal Pitch : 10 mm
✽ When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ XB
– EE164 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
200
220 22 25 EETXB2D221HJ 1.00 0.15 200
270 22 30 EETXB2D271HJ 1.10 0.15 200
25 25 EETXB2D271JJ 1.10 0.15 200
330 22 30 EETXB2D331HJ 1.20 0.15 200
25 25 EETXB2D331JJ 1.20 0.15 200
390
22 35 EETXB2D391HJ 1.30 0.15 200
25 30 EETXB2D391JJ 1.30 0.15 200
30 25 EETXB2D391KJ 1.30 0.15 200
470
22 40 EETXB2D471HJ 1.40 0.15 200
25 35 EETXB2D471JJ 1.40 0.15 200
30 30 EETXB2D471KJ 1.40 0.15 200
560
22 45 EETXB2D561HJ 1.50 0.15 200
25 35 EETXB2D561JJ 1.50 0.15 200
30 30 EETXB2D561KJ 1.50 0.15 200
680 25 40 EETXB2D681JJ 1.70 0.15 200
30 35 EETXB2D681KJ 1.70 0.15 100
820
25 50 EETXB2D821JJ 2.00 0.15 200
30 40 EETXB2D821KJ 2.00 0.15 100
35 30 EETXB2D821LJ 2.00 0.15 200
1000 30 45 EETXB2D102KJ 2.20 0.15 100
35 35 EETXB2D102LJ 2.20 0.15 100
1200 30 50 EETXB2D122KJ 2.30 0.15 100
35 40 EETXB2D122LJ 2.30 0.15 100
1500 35 50 EETXB2D152LJ 2.50 0.15 100
250
180 22 30 EETXB2E181HJ 0.90 0.15 200
25 25 EETXB2E181JJ 0.90 0.15 200
220 22 30 EETXB2E221HJ 1.00 0.15 200
25 25 EETXB2E221JJ 1.00 0.15 200
270
22 35 EETXB2E271HJ 1.10 0.15 200
25 30 EETXB2E271JJ 1.10 0.15 200
30 25 EETXB2E271KJ 1.10 0.15 200
330
22 40 EETXB2E331HJ 1.20 0.15 200
25 35 EETXB2E331JJ 1.20 0.15 200
30 25 EETXB2E331KJ 1.20 0.15 200
390
22 45 EETXB2E391HJ 1.30 0.15 200
25 35 EETXB2E391JJ 1.30 0.15 200
30 30 EETXB2E391KJ 1.30 0.15 200
470
25 45 EETXB2E471JJ 1.40 0.15 200
30 35 EETXB2E471KJ 1.40 0.15 100
35 30 EETXB2E471LJ 1.40 0.15 200
560
25 50 EETXB2E561JJ 1.50 0.15 200
30 35 EETXB2E561KJ 1.50 0.15 100
35 30 EETXB2E561LJ 1.50 0.15 200
680 30 45 EETXB2E681KJ 1.70 0.15 100
35 35 EETXB2E681LJ 1.70 0.15 100
820 30 50 EETXB2E821KJ 2.00 0.15 100
35 40 EETXB2E821LJ 2.00 0.15 100
1000 35 45 EETXB2E102LJ 2.20 0.15 100
1200 35 50 EETXB2E122LJ 2.30 0.15 100
Endurance : 105 °C 7000 h, Terminal Pitch : 10 mm
✽ When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ XB
– EE165 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
315
82 22 25 EETXB2F820HJ 0.64 0.15 200
100 22 30 EETXB2F101HJ 0.69 0.15 200
120 22 30 EETXB2F121HJ 0.75 0.15 200
25 25 EETXB2F121JJ 0.75 0.15 200
150
22 35 EETXB2F151HJ 0.82 0.15 200
25 30 EETXB2F151JJ 0.82 0.15 200
30 25 EETXB2F151KJ 0.82 0.15 200
180
22 40 EETXB2F181HJ 0.90 0.15 200
25 35 EETXB2F181JJ 0.90 0.15 200
30 25 EETXB2F181KJ 0.90 0.15 200
220
22 45 EETXB2F221HJ 1.00 0.15 200
25 40 EETXB2F221JJ 1.00 0.15 200
30 30 EETXB2F221KJ 1.00 0.15 200
270
25 45 EETXB2F271JJ 1.10 0.15 200
30 35 EETXB2F271KJ 1.10 0.15 100
35 30 EETXB2F271LJ 1.10 0.15 200
330
25 50 EETXB2F331JJ 1.20 0.15 200
30 40 EETXB2F331KJ 1.20 0.15 100
35 30 EETXB2F331LJ 1.20 0.15 200
390 30 45 EETXB2F391KJ 1.30 0.15 100
35 35 EETXB2F391LJ 1.30 0.15 100
470 30 50 EETXB2F471KJ 1.40 0.15 100
35 40 EETXB2F471LJ 1.40 0.15 100
560 35 45 EETXB2F561LJ 1.50 0.15 100
680 35 50 EETXB2F681LJ 1.70 0.15 100
350
82 22 25 EETXB2V820HJ 0.64 0.15 200
100 22 30 EETXB2V101HJ 0.69 0.15 200
25 25 EETXB2V101JJ 0.69 0.15 200
120 22 35 EETXB2V121HJ 0.75 0.15 200
25 30 EETXB2V121JJ 0.75 0.15 200
150
22 40 EETXB2V151HJ 0.82 0.15 200
25 30 EETXB2V151JJ 0.82 0.15 200
30 25 EETXB2V151KJ 0.82 0.15 200
180
22 45 EETXB2V181HJ 0.90 0.15 200
25 35 EETXB2V181JJ 0.90 0.15 200
30 30 EETXB2V181KJ 0.90 0.15 200
220
22 50 EETXB2V221HJ 1.00 0.15 200
25 40 EETXB2V221JJ 1.00 0.15 200
30 30 EETXB2V221KJ 1.00 0.15 200
270
25 50 EETXB2V271JJ 1.10 0.15 200
30 35 EETXB2V271KJ 1.10 0.15 100
35 30 EETXB2V271LJ 1.10 0.15 200
330 30 45 EETXB2V331KJ 1.20 0.15 100
35 35 EETXB2V331LJ 1.20 0.15 100
390 30 50 EETXB2V391KJ 1.30 0.15 100
35 40 EETXB2V391LJ 1.30 0.15 100
470 35 40 EETXB2V471LJ 1.40 0.15 100
560 35 50 EETXB2V561LJ 1.50 0.15 100
Endurance : 105 °C 7000 h, Terminal Pitch : 10 mm
✽ When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
✽
✽
✽
Sep. 201000
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ XB
– EE166 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan δ
(120 Hz)
(+20 °C)
max.
(V. DC) (µF) (mm) (mm) (A r.m.s.) (pcs)
400
56 22 25 EETXB2G560HJ 0.51 0.15 200
68 22 30 EETXB2G680HJ 0.56 0.15 200
25 25 EETXB2G680JJ 0.56 0.15 200
82 22 35 EETXB2G820HJ 0.64 0.15 200
25 25 EETXB2G820JJ 0.64 0.15 200
100 22 35 EETXB2G101HJ 0.69 0.15 200
25 30 EETXB2G101JJ 0.69 0.15 200
120
22 40 EETXB2G121HJ 0.75 0.15 200
25 35 EETXB2G121JJ 0.75 0.15 200
30 25 EETXB2G121KJ 0.75 0.15 200
150
22 50 EETXB2G151HJ 0.82 0.15 200
25 40 EETXB2G151JJ 0.82 0.15 200
30 30 EETXB2G151KJ 0.82 0.15 200
180
25 45 EETXB2G181JJ 0.90 0.15 200
30 35 EETXB2G181KJ 0.90 0.15 100
35 25 EETXB2G181LJ 0.90 0.15 200
220
25 50 EETXB2G221JJ 1.00 0.15 200
30 40 EETXB2G221KJ 1.00 0.15 100
35 30 EETXB2G221LJ 1.00 0.15 200
270 30 45 EETXB2G271KJ 1.10 0.15 100
35 35 EETXB2G271LJ 1.10 0.15 100
330 30 50 EETXB2G331KJ 1.20 0.15 100
35 40 EETXB2G331LJ 1.20 0.15 100
390 35 45 EETXB2G391LJ 1.30 0.15 100
470 35 50 EETXB2G471LJ 1.40 0.15 100
450
39 22 25 EETXB2W390HJ 0.37 0.15 200
47 22 30 EETXB2W470HJ 0.40 0.15 200
56 22 35 EETXB2W560HJ 0.47 0.15 200
25 25 EETXB2W560JJ 0.47 0.15 200
68 22 40 EETXB2W680HJ 0.53 0.15 200
25 30 EETXB2W680JJ 0.53 0.15 200
82
22 45 EETXB2W820HJ 0.56 0.15 200
25 35 EETXB2W820JJ 0.56 0.15 200
30 25 EETXB2W820KJ 0.56 0.15 200
100
22 50 EETXB2W101HJ 0.64 0.15 200
25 40 EETXB2W101JJ 0.64 0.15 200
30 30 EETXB2W101KJ 0.64 0.15 200
120 25 45 EETXB2W121JJ 0.72 0.15 200
30 30 EETXB2W121KJ 0.72 0.15 200
150
25 50 EETXB2W151JJ 0.79 0.15 200
30 40 EETXB2W151KJ 0.79 0.15 100
35 30 EETXB2W151LJ 0.79 0.15 200
180 30 45 EETXB2W181KJ 0.87 0.15 100
35 35 EETXB2W181LJ 0.87 0.15 100
220 30 50 EETXB2W221KJ 1.00 0.15 100
35 40 EETXB2W221LJ 1.00 0.15 100
270 35 45 EETXB2W271LJ 1.19 0.15 100
330 35 50 EETXB2W331LJ 1.38 0.15 100
Endurance : 105 °C 7000 h, Terminal Pitch : 10 mm
✽ When capacitors of φ35҂45L and φ35҂50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
✽
✽
✽
✽
Sep. 201000
