www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
A-12
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Mighty Mouse
with #8 Contacts
Mighty Mouse
Contacts and Tools
A
Series 80 Mighty Mouse
Contacts and Tools
Crimp Tools and Positioners
These crimp tools perform precision eight indent crimps for gas-tight wire terminations and
excellent tensile strength. Adjustment wheel has 8 settings. Ratchet mechanism prevents
improper crimps. Use with bayonet-type positioners. Check calibration with M22520/3 gages.
Length is 6.75 inches, weight is approx. 10 oz.
Figure Part Number Military Part
Number
Daniels Part
Number Tool Code
A- M/- AFM A
B- (none) MH B
A
B
AStandard M22520/2-01 crimper. Use with
standard size #23 and #20HD Mighty Mouse
contacts and with M39029/76 and /78 coaxial center
contacts. Requires positioner, ordered separately.
BSpecial MH992 crimper used with 50 ohm
matched impedance coaxial inner contacts.
Requires positioner, ordered separately.
EPositioner for M39029/76 and 78 coaxial inner
contact. Use with 809-015 crimp tool.
Positioners for use with Miniature Adjustable Crimp Tools
These bayonet-type positioners hold contacts at correct height for crimping with M22520/2 type
miniature step adjustable tools, above. Face plate shows correct tool settings.
CPositioner for standard size #23 contacts.
#22-#28 AWG. Use with 809-015 crimp tool.
DPositioner for small bore size #23 contacts.
#26-#30 AWG. Use with 809-015 crimp tool.
SPositioner for large bore size #23 contacts.
#20-#22 AWG. Use with M/- crimp tool.
TPositioner for long size #23 pin contact for
use with combo arrangements with size #8
contacts. Use with M22520/2-01 crimp tool.
UPositioner for long size #23 socket contact
for use with combo arrangements with size
#8 contacts. Use with M22520/2-01 crimp tool.
FPositioner for matched impedance #12 coaxial
inner contact. Use with 809-128 crimp tool.
HPositioner for matched impedance #12 coaxial
inner contact. Use with 809-128 crimp tool.
IPositioner for #20HD contacts. Use with 809-015
crimp tool.
Figure Part Number Military Part
Number
Daniels Part
Number Tool Code
C- (none) K C
D- (none) (none) D
E- M/- K- E
F- (none) K F
G- M/- K G
H- (none) K H
I- (none) (none) I
S809-301
(none) (none)
S
T809-174
(none)
(none) T
U809-369 M22520/2-07 K40 U
GPositioner for M39029/27 and 28 #12 coaxial
inner contact. Use with 809-015 crimp tool.
Miniature Adjustable Crimp Tools
CD
EF
GH
IS
T U
www.glenair.com E-Mail: sales@glenair.com
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
A-13
© 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A.
Dimensions in Inches (millimeters) are subject to change without notice.
Mighty Mouse
with #8 Contacts
Mighty Mouse
Contacts and Tools
A
Series 80 Mighty Mouse
Contacts and Tools
Crimp Tools and Positioners for Coaxial Contacts
PPositioner for use with size #12 coaxial contacts.
Use with 809-133 (M22520/31-01) crimp tool.
Figure Part Number Military Part Number Daniels Part Number Tool Code
O- M/- GS- O
P- M/- GP P
Parallel action crimp tool and hex die set for 50 ohm matched impedance #12 coax
QParallel action tool for use with hex crimp
dies. 11 inches OAL, 2.0 pounds. Anodized
aluminum frame, steel mechanism, plastic handles.
Includes tool for die set removal. Accepts all
M22520/5 die sets.
Figure Part Number Military Part Number Daniels Part Number Tool Code
Q- M/- HX Q
R- M/- Y R
OCrimp tool for use with size #12 coaxial contacts.
Black handles. 9.75 inches OAL, 1.25 pounds.
Crimp tool and positioner for #12 coaxial outer contact
For crimping size #12 shield sleeves. These mil spec approved tools feature a ratchet mechanism
to prevent damage from overcrimping. Check calibration with M22520/3 gage.
RDie set for terminating coaxial shield to outer
contact. Use with size #12 matched impedance
M39029/102 and 103 type coaxial contacts. Set
consists of upper and lower halves. Made of
hardened steel with black oxide nish. Die set has
two closures.
Crimp tool and positioner for #16 coaxial outer contact
For crimping size #16 shield sleeves. These mil spec approved tools feature a ratchet mechanism
to prevent damage from overcrimping. Check calibration with M22520/3 gage.
MCrimp tool for use with size #16 coaxial
contacts. Blue handles. 9.75 inches OAL,
1.25 pounds.
Figure Part Number Military Part Number Daniels Part Number Tool Code
M- M/- GS- M
N- M/- GP N
NPositioner for use with size #16 coaxial
contacts. Use with 809-127 (M22520/4-01)
crimp tool.
M
N
O
P
Q
R
J
L
K
Crimp tool and positioner for #12, #16 and #20 power contacts, 809-093 adapters
JCrimp tool for use with size #20, #16 and #12
power pins. 9.75 inches OAL, 1.25 pounds.
Use with M39029/57 and /58 contacts and 809-093
adapters.
Figure Part Number Military Part Number Daniels Part Number Tool Code
J- M/- AF J
K- M/- TH K
L - (none) TH L
KPositioner for use with size #20, #12 and #16
Power contacts.
LPositioner for use with 809-093 adapters.