LOW-PEAK® Time-Delay Fuses KRP-C
Class L – 600 Volt 601-2000A
Form No. KRP-C-601-2000
Page 1 of 3
BIF Doc #1008
Bussmann®
11-12-99
A99119 Rev. A
601A
to
800A
.38"
2"
2.5"
2.53"
Max.
10.75"
(± 0.09)
8.63"
(± 0.09)
6.75" 5.75"
801A
to
1200A
1350A
to
1600A
1800A
to
2000A
.5"
2.75"
.44"
2.38"
.38"
2"
3"
3.03"
Max.
3.5"
3.53"
Max.
0.63" (± 0.03)
All Slots and Holes
3.75"
2.5"
2.78"
Max.
Terminal:
Width (± 0.06)
Thickness (± 0.03)
Catalog Symbol: KRP-C-SP
Time-Delay – 4 seconds (minimum) at 500% rated current
Current-Limiting
Ampere Rating: 601 to 2000 Amperes‡
Voltage Rating: 600 Volts AC (or less) 300 Volts DC (or less)
Interrupting Rating: 300,000A RMS Sym. (UL)
Interrupting Rating: 100,000A DC (UL)
Agency Approvals:
UL Listed – Special Purpose£, Guide JFHR, File E56412
CSA Certified – (200,000 AIR), Class 1422-02, File 53787
Class L per CSA C22.2, No. 248.10
‡Use KRP-CL for current ratings below 601 amps.
*601-3000A is rated 340 VDC and 50 KAIC.
£Meets all performance requirements of UL Standard 248-10 for Class L fuses.
Ampere Ratings†
Catalog Ctn. Weight** Catalog Ctn. Weight**
Number Qty. Lbs. Kg. Number Qty. Lbs. Kg.
KRP-C-601SP KRP-C-1350SP
KRP-C-650SP KRP-C-1400SP
KRP-C-700SP 1 3.75 1.7 KRP-C-1500SP 1 6.50 2.948
KRP-C-750SP KRP-C-1600SP
KRP-C-800SP KRP-C-1800SP
KRP-C-801SP KRP-C-1900SP 1 8.5 3.85
KRP-C-900SP KRP-C-2000SP
KRP-C-1000SP 1 4.5 2.041
KRP-C-1100SP
KRP-C-1200SP
**Weight per carton.
†Special purpose rating of 300,000 AIR.
Dimensional Data All other tolerances (± 0.02)
General Information:
• All-purpose silver-linked fuse for both overload and short-
circuit protection for high capacity systems (mains and
large feeders).
• Time-delay (minimum of four seconds at five times amp
rating) for close sizing.
• Current-limiting action of the fuse generally affords
considerable reduction in bus bracing.
• Interrupting rating of 300,000 amperes complies with
NEC Sections 110-9 and 230-65 for today’s large capacity
systems.
• O-ring seals maximize pressure build-up during current-
limiting action and ensure filler retention.
• High grade silica-sand filler; accelerates response of fuse to
short-circuits by having quenching effect upon the fuse arc.
• 99.9% pure silver fuselinks. The high conductivity of silver
gives low watt loss and low operating temperature at nor-
mal current levels; maximizes total clearing I2t fault energy
let-through.
• Selective coordination (blackout prevention).
• Glass melamine tube.
• Silver-plated end bells.
CE logo denotes compliance with European Union Low Voltage Directive
(50-1000 VAC, 75-1500 VDC). Refer to BIF document #8002 or contact
Bussmann Application Engineering at 636-527-1270 for more information.
11-12-99
A99119 Rev. A
LOW-PEAK® Time-Delay Fuses KRP-C
Class L – 600 Volt 601-2000A
Form No. KRP-C-601-2000
Page 2 of 3
BIF Doc #1008
Bussmann®
AMPERE
RATING
300
100
10
1
.1
.01
1,000
10,000
100,000
200,000
CURRENT IN AMPERES
TIME IN SECONDS
800A
1200A
1600A
2000A
Time-Current Characteristic Curves–Average Melt
Fuseblocks: (601 - 1200 Amps)
Catalog
Number Poles
51215 1
51235 3
No reducers available.
Bussmann®
11-12-99
A99119 Rev. A
Form No. KRP-C-601-2000
Page 3 of 3
BIF Doc #1008
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained
in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
LOW-PEAK® Time-Delay Fuses KRP-C
Class L – 600 Volt 601-2000A
Current-Limitation Curves
