CMA 30 P 1600 FC advanced V RRM = I T(RMS) = I T(AV)M = Standard SCR Phase leg Part number 2 1 4 5 1600 V 47 A 30 A 3 CMA 30 P 1600 FC Backside: Isolated Features / Advantages: Applications: Package: Thyristor for line frequency Planar passivated chip Long-term stability of blocking currents and voltages Motor control Power converter AC power controller Switch mode and resonant mode power supplies Light and temperature control Housing: i4-Pac rDCB isolated backside rIsolation Voltage 3000 V rEpoxy meets UL 94V-0 rRoHS compliant Ratings Conditions Symbol Definition VRSM/DSM max. non-repetitive reverse/forward blocking voltage VRRM/DRM max. repetitive reverse/forward blocking voltage I R/D reverse current, drain current VT forward voltage V A VR = 1600 V TVJ = 125C 2 mA TVJ = 25C 1.41 V 1.78 V 1.34 V 30 A IF = 60 A IF = 30 A IF = 60 A RMS forward current 180 sine for power loss calculation only R thJC thermal resistance junction to case virtual junction temperature Ptot total power dissipation PGM max. gate power dissipation TVJ = 125C 1.80 V T VJ = 150C 30 A 47 A TVJ = 150C 0.90 V 13.8 m 1.05 K/W 150 C TC = 25C 120 W T C = 150C 10 W -40 t P = 30 s t P = 300 s PGAV average gate power dissipation I FSM max. forward surge current It CJ value for fusing junction capacitance IXYS reserves the right to change limits, conditions and dimensions. (c) 2008 IXYS all rights reserved V 50 IF = T VJ Unit 1600 I T(RMS) slope resistance 1700 TVJ = 25C TC = 90C rT max. TVJ = 25C max. average forward current threshold voltage typ. VR = 1600 V I T(AV)M VT0 min. TVJ = 25C 5 W 0.5 W t = 10 ms; (50 Hz), sine TVJ = 45C 400 A t = 8,3 ms; (60 Hz), sine VR = 0 V 430 A t = 10 ms; (50 Hz), sine TVJ = 150C 340 A t = 8,3 ms; (60 Hz), sine VR = 0 V 365 A t = 10 ms; (50 Hz), sine TVJ = 45C 800 As t = 8,3 ms; (60 Hz), sine t = 10 ms; (50 Hz), sine VR = 0 V 770 As TVJ = 150C 580 As 555 As t = 8,3 ms; (60 Hz), sine VR = 0 V VR = 400 V f = 1 MHz TVJ = 25C Data according to IEC 60747and per diode unless otherwise specified 16 pF 20080515 CMA 30 P 1600 FC advanced Ratings Symbol Definition Conditions (di/dt) cr critical rate of rise of current TVJ = 125C min. repetitive, I T = typ. 40 A max. 150 Unit A/s f = 50 Hz; tP = 200 s I G = 0.3 A; di G /dt = 0.3 A/s (dv/dt) cr critical rate of rise of voltage VGT gate trigger voltage VD = VDRM non-repetitive, I T = 22 A 500 A/s VD = VDRM TVJ = 125 C 1000 V/s TVJ = 25 C 1 V TVJ = -40 C 1.2 V TVJ = 25 C 65 mA TVJ = -40 C 80 mA TVJ = 150 C 0.2 V 5 mA TVJ = 25 C 150 mA VD = 6 V RGK = TVJ = 25 C 100 mA VR = 1/2 VDRM TVJ = 25 C 2 s RGK = ; method 1 (linear voltage rise) I GT gate trigger current VGD gate non-trigger voltage I GD gate non-trigger current IL latching current VD = 6 V VD = 6 V VD = VDRM t p = 10 s IG = 0.3 A; di G /dt = 0.3 A/s IH holding current t gd gate controlled delay time IG = 0.5 A; di G /dt = 0.5 A/s tq turn-off time VR = 100 V; I T = 11 A TVJ = 25 C 150 s VD = VDRM ; t p = 200 s di/dt = 10 A/s; dv/dt = 20 V/s IXYS reserves the right to change limits, conditions and dimensions. (c) 2008 IXYS all rights reserved Data according to IEC 60747and per diode unless otherwise specified 20080515 CMA 30 P 1600 FC advanced Ratings Symbol Definition Conditions I RMS RMS current per pin 1) RthCH thermal resistance case to heatsink Tstg storage temperature min. typ. max. Unit 70 0.20 -55 Weight A K/W 150 C 9 FC mounting force with clip V ISOL isolation voltage 20 g 120 N t = 1 second 3600 V t = 1 minute 3000 V dS creapage distance on surface mm dA striking distance through air mm 1) IRMS is typically limited by: 1. pin-to-chip resistance; or by 2. current capability of the chip. In case of 1, a common cathode/anode configuration and a non-isolated backside, the whole current capability can be used by connecting the backside. Part number Product Marking Logo C M A 30 P 1600 FC IXYS = = = = = = = Thyristor (SCR) Standard SCR (up to 1800V) Current Rating [A] Phase leg Reverse Voltage [V] i4-Pac (5) Part No. UL listed Date Code Ordering Standard Part Name CMA 30 P 1600 FC Similar Part CMA50P1600FC IXYS reserves the right to change limits, conditions and dimensions. (c) 2008 IXYS all rights reserved Marking on Product CMA30P1600FC Package i4-Pac (5) Delivering Mode Tube Base Qty Code Key 24 507440 Voltage class 1600 Data according to IEC 60747and per diode unless otherwise specified 20080515 CMA 30 P 1600 FC advanced Outlines i4-Pac Die konvexe Form des Substrates ist typ. < 0,05 mm uber der Kunststoffoberflache der Bauteilunterseite The convex bow of substrate is typ. < 0.05 mm over plastic surface level of device bottom side IXYS reserves the right to change limits, conditions and dimensions. (c) 2008 IXYS all rights reserved Data according to IEC 60747and per diode unless otherwise specified 20080515