PD - 94925A IRGB10B60KDPbF IRGS10B60KDPbF IRGSL10B60KDPbF INSULATED GATE BIPOLAR TRANSISTOR WITH ULTRAFAST SOFT RECOVERY DIODE C Features * Low VCE (on) Non Punch Through IGBT Technology. * Low Diode VF. * 10s Short Circuit Capability. * Square RBSOA. * Ultrasoft Diode Reverse Recovery Characteristics. * Positive VCE (on) Temperature Coefficient. * Lead-Free VCES = 600V IC = 12A, TC=100C G tsc > 10s, TJ=150C E n-channel VCE(on) typ. = 1.8V Benefits * Benchmark Efficiency for Motor Control. * Rugged Transient Performance. * Low EMI. * Excellent Current Sharing in Parallel Operation. TO-220AB IRGB10B60KD D2Pak IRGS10B60KD TO-262 IRGSL10B60KD Absolute Maximum Ratings Parameter VCES IC @ TC = 25C IC @ TC = 100C ICM ILM IF @ TC = 25C IF @ TC = 100C IFM VGE PD @ TC = 25C PD @ TC = 100C TJ TSTG Collector-to-Emitter Voltage Continuous Collector Current Continuous Collector Current Pulsed Collector Current Clamped Inductive Load Current Diode Continuous Forward Current Diode Continuous Forward Current Diode Maximum Forward Current Gate-to-Emitter Voltage Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Soldering Temperature, for 10 sec. Max. Units 600 22 12 44 44 22 10 44 20 156 62 -55 to +150 V A V W C 300 (0.063 in. (1.6mm) from case) Thermal Resistance Parameter RJC RJC RCS RJA RJA Wt www.irf.com Junction-to-Case - IGBT Junction-to-Case - Diode Case-to-Sink, flat, greased surface Junction-to-Ambient, typical socket mount Junction-to-Ambient (PCB Mount, steady state) Weight Min. Typ. Max. --- --- --- --- --- --- --- --- 0.50 --- --- 1.44 0.8 3.4 --- 62 40 --- Units C/W g 1 11/24/04 IRG/B/S/SL10B60KDPbF Electrical Characteristics @ TJ = 25C (unless otherwise specified) V(BR)CES V(BR)CES/TJ VCE(on) VGE(th) VGE(th)/TJ gfe ICES VFM IGES Parameter Min. Typ. Collector-to-Emitter Breakdown Voltage 600 --- Temperature Coeff. of Breakdown Voltage --- 0.3 Collector-to-Emitter Saturation Voltage 1.5 1.80 --- 2.20 Gate Threshold Voltage 3.5 4.5 Temperature Coeff. of Threshold Voltage --- -10 Forward Transconductance --- 7.0 Zero Gate Voltage Collector Current --- 3.0 --- 300 Diode Forward Voltage Drop --- 1.30 --- 1.30 Gate-to-Emitter Leakage Current --- --- Max. Units Conditions --- V VGE = 0V, IC = 500A --- V/C VGE = 0V, IC = 1.0mA, (25C-150C) 2.20 IC = 10A, VGE = 15V 2.50 V IC = 10A, VGE = 15V TJ = 150C 5.5 V VCE = VGE, IC = 250A --- mV/C VCE = VGE, IC = 1.0mA, (25C-150C) --- S VCE = 50V, IC = 10A, PW=80s 150 A VGE = 0V, VCE = 600V 700 VGE = 0V, VCE = 600V, TJ = 150C 1.45 IC = 10A 1.45 V IC = 10A TJ = 150C 100 nA VGE = 20V Ref.Fig. 5, 6,7 9,10,11 9,10,11 12 8 Switching Characteristics @ TJ = 25C (unless otherwise specified) Qg Qge Qgc Eon Eoff Etot td(on) tr td(off) tf Eon Eoff Etot td(on) tr td(off) tf Cies Coes Cres Parameter Total Gate Charge (turn-on) Gate - Emitter Charge (turn-on) Gate - Collector Charge (turn-on) Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Switching Loss Turn-Off Switching Loss Total Switching Loss Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance RBSOA Reverse Bias Safe Operting Area SCSOA Short Circuit Safe Operting Area Erec trr Irr Reverse Recovery energy of the diode Diode Reverse Recovery time Diode Peak Reverse Recovery Current Ref.Fig. Max. Units Conditions --- IC = 10A --- nC VCC = 400V CT1 --- VGE = 15V CT4 247 J IC = 10A, VCC = 400V 360 VGE = 15V,RG = 47, L = 200H 607 Ls = 150nH TJ = 25C 39 IC = 10A, VCC = 400V 29 VGE = 15V, RG = 47, L = 200H CT4 262 ns Ls = 150nH, TJ = 25C 32 CT4 340 IC = 10A, VCC = 400V 13,15 464 J VGE = 15V,RG = 47, L = 200H WF1WF2 804 Ls = 150nH TJ = 150C 14, 16 39 IC = 10A, VCC = 400V CT4 28 VGE = 15V, RG = 47, L = 200H 274 ns Ls = 150nH, TJ = 150C WF1 34 WF2 --- VGE = 0V --- pF VCC = 30V --- f = 1.0MHz 4 TJ = 150C, IC = 44A, Vp =600V FULL SQUARE VCC = 500V, VGE = +15V to 0V,RG = 47 CT2 CT3 s TJ = 150C, Vp =600V,RG = 47 10 --- --- WF4 VCC = 360V, VGE = +15V to 0V 17,18,19 --- 245 330 J TJ = 150C 20, 21 --- 90 105 ns VCC = 400V, IF = 10A, L = 200H CT4,WF3 --- 19 22 A VGE = 15V,RG = 47, Ls = 150nH Min. --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Typ. 38 4.3 16.3 140 250 390 30 20 230 23 230 350 580 30 20 250 26 620 62 22 Note to are on page 15 2 www.irf.com IRG/B/S/SL10B60KDPbF 25 180 160 20 140 120 IC (A) Ptot (W) 15 10 100 80 60 40 5 20 0 0 0 20 40 60 80 100 120 140 160 0 T C (C) 20 40 60 80 100 120 140 160 T C (C) Fig. 1 - Maximum DC Collector Current vs. Case Temperature Fig. 2 - Power Dissipation vs. Case Temperature 100 100 10 IC (A) 10 s 10 1 DC IC A) 20 s 100 s 1 1ms 0.1 1 10 100 1000 VCE (V) Fig. 3 - Forward SOA TC = 25C; TJ 150C www.irf.com 10000 0 10 100 1000 VCE (V) Fig. 4 - Reverse Bias SOA TJ = 150C; VGE =15V 3 IRG/B/S/SL10B60KDPbF 40 40 VGE VGE VGE VGE VGE 35 30 VGE VGE VGE VGE VGE 35 30 25 ICE (A) ICE (A) 25 = 18V = 15V = 12V = 10V = 8.0V 20 20 15 15 10 10 5 5 0 = 18V = 15V = 12V = 10V = 8.0V 0 0 1 2 3 4 5 6 0 1 2 VCE (V) Fig. 5 - Typ. IGBT Output Characteristics TJ = -40C; tp = 80s 5 6 40 VGE = 18V VGE = 15V VGE = 12V VGE = 10V VGE = 8.0V 35 30 -40C 25C 150C 35 30 25 IF (A) 25 ICE (A) 4 Fig. 6 - Typ. IGBT Output Characteristics TJ = 25C; tp = 80s 40 20 20 15 15 10 10 5 5 0 0 0 1 2 3 4 5 6 VCE (V) Fig. 7 - Typ. IGBT Output Characteristics TJ = 150C; tp = 80s 4 3 VCE (V) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 VF (V) Fig. 8 - Typ. Diode Forward Characteristics tp = 80s www.irf.com 20 20 18 18 16 16 14 14 12 ICE = 5.0A 10 ICE = 10A 8 ICE = 15A VCE (V) VCE (V) IRG/B/S/SL10B60KDPbF 12 ICE = 5.0A 10 ICE = 10A 8 ICE = 15A 6 6 4 4 2 2 0 0 5 10 15 20 5 10 VGE (V) 15 20 VGE (V) Fig. 10 - Typical VCE vs. VGE TJ = 25C Fig. 9 - Typical VCE vs. VGE TJ = -40C 20 80 18 T J = 25C 70 T J = 150C 16 60 12 10 ICE = 5.0A ICE = 10A 8 ICE = 15A 50 ICE (A) VCE (V) 14 40 30 6 20 T J = 150C 4 10 2 0 T J = 25C 0 5 10 15 VGE (V) Fig. 11 - Typical VCE vs. VGE TJ = 150C www.irf.com 20 0 5 10 15 20 VGE (V) Fig. 12 - Typ. Transfer Characteristics VCE = 50V; tp = 10s 5 IRG/B/S/SL10B60KDPbF 1000 800 700 tdOFF 500 Swiching Time (ns) Energy (J) 600 EOFF 400 300 EON 200 100 tdON tF 100 0 0 5 10 15 20 tR 10 25 0 5 10 IC (A) 15 Fig. 14 - Typ. Switching Time vs. IC TJ = 150C; L=200H; VCE= 400V RG= 47; VGE= 15V 500 1000 EOFF 450 tdOFF 400 300 Swiching Time (ns) 350 EON 250 200 150 100 tdON tR 100 tF 50 0 10 0 50 100 R G () Fig. 15 - Typ. Energy Loss vs. RG TJ = 150C; L=200H; VCE= 400V ICE= 10A; VGE= 15V 6 25 IC (A) Fig. 13 - Typ. Energy Loss vs. IC TJ = 150C; L=200H; VCE= 400V RG= 47; VGE= 15V Energy (J) 20 150 0 50 100 150 RG () Fig. 16 - Typ. Switching Time vs. RG TJ = 150C; L=200H; VCE= 400V ICE= 10A; VGE= 15V www.irf.com IRG/B/S/SL10B60KDPbF 25 RG = 22 15 RG = 47 10 RG = 100 20 IRR (A) 20 IRR (A) 25 RG = 10 15 10 5 5 0 0 0 5 10 15 20 0 25 50 100 150 RG () IF (A) Fig. 18 - Typical Diode IRR vs. RG TJ = 150C; IF = 10A Fig. 17 - Typical Diode IRR vs. IF TJ = 150C 1200 25 10 1100 1000 Q RR (C) IRR (A) 20 22 15 10 47 900 100 800 20A 700 10A 600 5 5.0A 500 400 0 0 500 1000 diF /dt (A/s) Fig. 19- Typical Diode IRR vs. diF/dt VCC= 400V; VGE= 15V; ICE= 10A; TJ = 150C www.irf.com 1500 0 500 1000 1500 diF /dt (A/s) Fig. 20 - Typical Diode QRR VCC= 400V; VGE= 15V;TJ = 150C 7 IRG/B/S/SL10B60KDPbF 450 400 10 350 22 Energy (J) 300 250 47 200 100 150 100 50 0 0 5 10 15 20 25 IF (A) Fig. 21 - Typical Diode ERR vs. IF TJ = 150C 16 1000 Cies 14 300V 400V 10 VGE (V) Capacitance (pF) 12 Coes 100 8 6 4 Cres 2 0 10 0 1 10 VCE (V) Fig. 22- Typ. Capacitance vs. VCE VGE= 0V; f = 1MHz 8 10 20 30 40 100 Q G , Total Gate Charge (nC) Fig. 23 - Typical Gate Charge vs. VGE ICE = 10A; L = 600H www.irf.com IRG/B/S/SL10B60KDPbF 1 Thermal Response ( Z thJC ) D = 0.50 0.20 0.1 0.10 J 0.05 0.01 0.02 R1 R1 J 1 R2 R2 2 1 R3 R3 3 2 C Ri (C/W) 0.285 i (sec) 0.000134 0.241 0.288 0.000565 0.0083 3 Ci= i/Ri Ci= i/Ri 0.01 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc SINGLE PULSE ( THERMAL RESPONSE ) 0.001 1E-6 1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 t1 , Rectangular Pulse Duration (sec) Fig 24. Maximum Transient Thermal Impedance, Junction-to-Case (IGBT) Thermal Response ( Z thJC ) 10 D = 0.50 1 0.20 0.10 0.05 0.01 0.02 0.1 J R1 R1 J 1 1 R2 R2 2 3 2 Ci= i/Ri Ci= i/Ri 0.01 R3 R3 SINGLE PULSE ( THERMAL RESPONSE ) C 3 Ri (C/W) i (sec) 0.846 0.000149 1.830 1.143 0.001575 0.027005 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 1E-6 1E-5 1E-4 1E-3 1E-2 1E-1 1E+0 t1 , Rectangular Pulse Duration (sec) Fig 25. Maximum Transient Thermal Impedance, Junction-to-Case (DIODE) www.irf.com 9 IRG/B/S/SL10B60KDPbF L L VCC DUT 80 V + - 0 DUT 480V Rg 1K Fig.C.T.2 - RBSOA Circuit Fig.C.T.1 - Gate Charge Circuit (turn-off) diode clamp / DUT Driver L - 5V 360V DC DUT / DRIVER DUT VCC Rg Fig.C.T.3 - S.C.SOA Circuit Fig.C.T.4 - Switching Loss Circuit R= DUT VCC ICM VCC Rg Fig.C.T.5 - Resistive Load Circuit 10 www.irf.com IRG/B/S/SL10B60KDPbF 600 12 600 30 500 10 500 25 8 400 20 6 300 400 90% ICE 4 15 90% test current 200 10% test current 5% V CE 100 10 I CE (A) 200 VCE (V) tf ICE (A) V CE (V) TEST CURRENT 300 5% ICE 0 2 100 0 0 tr 5% V CE 5 0 Eon Loss Eoff Loss 0.00 0.20 0.40 0.60 -2 0.80 16.00 time(s) time (s) Fig. WF1- Typ. Turn-off Loss Waveform @ TJ = 150C using Fig. CT.4 100 Fig. WF2- Typ. Turn-on Loss Waveform @ TJ = 150C using Fig. CT.4 15 400 100 V CE QR R 0 350 10 tR R -100 300 5 ICE 0 -400 10% Peak IRR Peak IRR -500 -600 -0.15 -5 0.05 0.15 -10 -20 0.25 time (S) Fig. WF3- Typ. Diode Recovery Waveform @ TJ = 150C using Fig. CT.4 www.irf.com 200 50 150 -15 -0.05 V CE (V) -200 IF (A) VF (V) 250 -300 16.10 -5 16.20 ICE (A) -100 -0.20 -100 15.90 100 50 0 -5.00 0.00 5.00 10.00 0 15.00 time (S) Fig. WF4- Typ. S.C Waveform @ TJ = 150C using Fig. CT.3 11 IRG/B/S/SL10B60KDPbF TO-220AB Package Outline Dimensions are shown in millimeters (inches) TO-220AB Part Marking Information E XAMPL E : T HIS IS AN IR F 1010 L OT CODE 1789 AS S E MB L E D ON WW 19, 1997 IN T H E AS S E MB L Y L INE "C" Note: "P" in assembly line position indicates "Lead-Free" INT E R NAT IONAL R E CT IF IE R L OGO AS S E MB L Y L OT CODE 12 PAR T NU MB E R DAT E CODE YE AR 7 = 1997 WE E K 19 L INE C www.irf.com IRG/B/S/SL10B60KDPbF D2Pak Package Outline Dimensions are shown in millimeters (inches) D2Pak Part Marking Information T HIS IS AN IRF530S WIT H LOT CODE 8024 AS S EMBLED ON WW 02, 2000 IN T HE AS S EMBLY LINE "L" INT ERNAT IONAL RECTIFIER LOGO Note: "P" in as s embly line pos ition indicates "Lead-Free" ASS EMBLY LOT CODE OR INT ERNAT IONAL RECTIFIE R LOGO AS S E MBLY LOT CODE www.irf.com PART NUMBER F530S DAT E CODE YEAR 0 = 2000 WEEK 02 LINE L PART NUMBER F 530S DAT E CODE P = DES IGNAT ES LEAD-FREE PRODUCT (OPT IONAL) YEAR 0 = 2000 WEEK 02 A = AS S EMBLY S ITE CODE 13 IRG/B/S/SL10B60KDPbF TO-262 Package Outline Dimensions are shown in millimeters (inches) TO-262 Part Marking Information EXAMPLE: T HIS IS AN IRL3103L LOT CODE 1789 ASS EMBLED ON WW 19, 1997 IN T HE ASS EMBLY LINE "C" Note: "P" in ass embly line position indicates "Lead-Free" INT ERNAT IONAL RECT IFIER LOGO ASS EMBLY LOT CODE PART NUMBER DAT E CODE YEAR 7 = 1997 WEEK 19 LINE C OR INT ERNAT IONAL RECT IFIER LOGO ASS EMBLY LOT CODE 14 PART NUMBER DAT E CODE P = DES IGNAT ES LEAD-FREE PRODUCT (OPT IONAL) YEAR 7 = 1997 WEEK 19 A = ASS EMBLY SITE CODE www.irf.com IRG/B/S/SL10B60KDPbF D2Pak Tape & Reel Information Dimensions are shown in millimeters (inches) TRR 1.60 (.063) 1.50 (.059) 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) FEED DIRECTION 1.85 (.073) 11.60 (.457) 11.40 (.449) 1.65 (.065) 0.368 (.0145) 0.342 (.0135) 24.30 (.957) 23.90 (.941) 15.42 (.609) 15.22 (.601) TRL 1.75 (.069) 1.25 (.049) 10.90 (.429) 10.70 (.421) 4.72 (.136) 4.52 (.178) 16.10 (.634) 15.90 (.626) FEED DIRECTION 13.50 (.532) 12.80 (.504) 27.40 (1.079) 23.90 (.941) 4 330.00 (14.173) MAX. 60.00 (2.362) MIN. NOTES : 1. COMFORMS TO EIA-418. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 26.40 (1.039) 24.40 (.961) 3 30.40 (1.197) MAX. 4 Notes: This is only applied to TO-220AB package This is applied to D2Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ). For recommended footprint and soldering techniques refer to application note #AN-994. Energy losses include "tail" and diode reverse recovery. VCC = 80% (VCES), VGE = 20V, L = 100H, RG = 47. TO-220 package is not recommended for Surface Mount Application Data and specifications subject to change without notice. This product has been designed and qualified for Industrial market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 11/04 www.irf.com 15 Note: For the most current drawings please refer to the IR website at: http://www.irf.com/package/