Page 1 of 2
Fiber Optic Center, Inc., 23 Centre Street, New Bedford, MA, 02740-6322, USA Website: www.focenter.com
e-mail: sales@focenter.com, Toll Free: (800) IS-FIBER, (800) 473-4237, Tel: (508) 992-6464, Fax: (508) 991-8876
FO-F Series Precision
Fiber Arrays
Precision spaced arrays are simply fiber optic assemblies comprised of multiple fibers
located in very exact locations relative to one another. Typically, these devices are used
to match laser diode arrays or as optical switch sub-components.
In laser diode applications, the arrays are fabricated so that the individual fibers are
precisely located to match multi-diode junction bars and arrays. The fibers can be arranged
in virtually any linear or two-dimensional pattern and AR coatings can be provided as
well.
The output side of fibers can be likewise arranged in virtually any pattern, but a common
application is a very closely packed circular aperture in which individual fibers have been
stripped down to the cladding. This provides the smallest and highest energy density
aperture.
In optical switch applications, precision is again the key. Arrays are usually two-
dimensional and made in matched pairs so each pair is comprised of two identical arrays.
RoMacks capabilities can address specialty or OEM applications by providing end fittings,
housings and ferrules to suit the application. Call Fiber Optic Center for information.
Excitation and signal collection
fibers in a single probe
Virtually any configuration of
mapping is possible
Same unit can be used for
several measuring techniques
Signal collection fibers can
easily be configured into a still
aperture to match certain
instruments
Available in deep UV, UV/VIS
and VIS/NIR versions
Various fiber optic connectors,
ferrules and fittings are
available
Features and Benefits
Applications
Fluorescence
Raman
Reflectance
General Sensing
SPECIFICATIONS
Fiber transmission curves and other performance details can be provided. Call Fiber
Optic Center.
FO-F series products need to be specified with regard to their aperture shapes and
sizes, lengths, fiber type and end terminations, along with any specialty information.
The part numbering system is an effort to accommodate the most commonly ordered
bundles and arrays, but the possible configurations that fall under this product area are
limited only by the imagination and the range of applications that require fiber optic
assemblies like these. If the device required does not conform to the part numbering
system described below, please call Fiber Optic Systems for expert assistance.
The end terminations or end fittings possible are also unlimited. Some standard fitting
have been included below, but virtually any configuration can be provided. Call to discuss
your needs.
ORDERING INFORMATION