Horizontal Mount Gapped Power Toroidal Inductor The Horizontal Mount Power Toroidal Inductors manufactured by Engineered Components Company are designed using stable powdered iron core material. The toroidal core inductor design provides a low external magnetic field and a high core saturation currents. The standard inductance value tolerance is +/-10% when measured at 1 Khz, (IDC=0). Inductance values and Q values are measured on an HP 4284A LCR meter. Since inductance varies with AC/DC current values, each end application should be evaluated to ensure proper readings. The tabulated current ratings (Rated IDC)are those calculated to cause a 40 deg. C rise in case temperature. These inductors are designed to meet the applicable portions of MIL-C-15305, Grade 1, Class B. The operating temperature range is -55 to +125 deg. C. Inductors are capable of withstanding 500Vdc@50 uA applied between the coil and the case. The wound toroid inductor is secured in the housing with an epoxy resin. The housing material is a Liquid Crystal Polymer, off-white in color. Marking, applied by Laser Label, designates one coil termination lead with an indicator dot (see Figure 1). The second coil termination lead is designated by ribs on the side of the housing. The remaining leads are no-connection leads. The copper leads are tin-lead plated. The larger products (HMGPT-47 and larger) have a brass insert (in accordance with specification QQ-B-626) with (4) 8-32 threads available on the bottom of the part. This threaded female insert can be used to mechanically mount or secure the product to a P.C. Board or chassis. Product Selection Table PART NUMBER L(uH) HMGPT-5.6 5.6 HMGPT-6.8 6.8 HMGPT-8.2 8.2 HMGPT-10 10.0 HMGPT-12 12.0 HMGPT-15 15.0 HMGPT-18 18.0 HMGPT-22 22.0 HMGPT-27 27.0 HMGPT-33 33.0 HMGPT-39 39.0 HMGPT-47 47.0 HMGPT-56 56.0 HMGPT-68 68.0 HMGPT-82 82.0 HMGPT-100 100.0 HMGPT-120 120.0 HMGPT-150 150.0 HMGPT-180 180.0 HMGPT-220 220.0 HMGPT-270 270.0 HMGPT-330 330.0 HMGPT-390 390.0 HMGPT-470 470.0 HMGPT-560 560.0 HMGPT-680 680.0 HMGPT-820 820.0 HMGPT-1000 1000.0 HMGPT-1200 1200.0 A 0.620 0.620 0.620 0.620 0.770 0.770 0.770 0.970 0.970 0.970 0.970 1.170 1.170 1.170 1.170 1.170 1.470 1.470 1.470 1.470 1.470 1.770 1.770 1.770 1.770 1.870 1.870 1.870 1.870 B 0.300 0.300 0.300 0.300 0.350 0.350 0.350 0.350 0.350 0.350 0.350 0.450 0.450 0.450 0.450 0.450 0.550 0.550 0.550 0.550 0.550 0.650 0.650 0.650 0.650 0.725 0.725 0.725 0.725 C 0.500 0.500 0.500 0.500 0.650 0.650 0.650 0.850 0.850 0.850 0.850 1.050 1.050 1.050 1.050 1.050 1.300 1.300 1.300 1.300 1.300 1.600 1.600 1.600 1.600 1.700 1.700 1.700 1.700 .250 .025 B HMGPT-100 YYWW .032 DIA. DATE CODE +/-.020 .140 8-32 FOUR FULL THREADS (HMGPT-47 AND LARGER) C A .030 FULL R. Figure 1 IDC (amps) readings for % drops DCR(ohms) RATED IDC(amps) 10% DROP IN L 20% DROP IN L 30% DROP IN L 0.005 5.7 4.70 5.20 5.45 0.006 5.7 4.30 4.70 4.95 0.007 5.7 3.70 4.15 4.34 0.008 5.7 3.50 3.90 4.10 0.009 5.7 4.90 5.40 5.70 0.010 5.7 4.60 5.10 5.35 0.011 5.7 4.10 4.60 4.90 0.013 5.7 4.30 4.70 4.90 0.014 5.7 3.80 4.20 4.40 0.015 5.7 3.40 3.80 3.95 0.016 5.7 3.20 3.55 3.75 0.019 5.7 4.20 4.70 5.00 0.021 5.7 4.00 4.50 4.70 0.023 5.7 3.60 4.05 4.30 0.025 5.7 3.30 3.70 3.95 0.027 5.7 3.00 3.30 3.50 0.031 5.7 3.40 3.80 4.00 0.034 5.7 3.10 3.50 3.70 0.036 5.7 2.90 3.20 3.30 0.041 5.7 2.70 2.95 3.10 0.046 5.7 2.00 2.55 2.65 0.057 5.7 2.90 3.30 3.50 0.063 5.7 2.70 3.00 3.20 0.068 5.7 2.50 2.80 3.00 0.076 5.7 2.25 2.55 2.70 0.069 5.7 2.80 3.20 3.40 0.076 5.7 2.55 2.90 3.05 0.084 5.7 2.30 2.60 2.80 0.094 5.7 2.00 2.30 2.50 Special modules can often be manufactured to provide for customer specific applications. engineered components company A Division of Cornucopia Tool & Plastics, Inc. PO Box 1915, 448 Sherwood Rd., Paso Robles CA 93447 Phone: 805-369-0034 Fax: 805-369-0033 Web: www.ec2.com