PRODUCT DATA SHEET
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2008 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
The Connor-Winfield HV5x-xxx
series is a 5.0V HCMOS, 14
Pin DIP hermetically sealed,
Voltage Controlled Crystal
Oscillator (VCXO). Based on a
fundamental crystal design the
is designed for
phased lock loop applications
requiring low jitter and tight
stability.
HV5x-xxx
12
FREQUENCY RANGE
30 Mhz to 100 MHz
5.0V OPERATION
LOW JITTER <1ps RMS
FREQUENCY STABILITY
HV51-xxx SERIES ±25PPM
HERMETICALLY SEALED PACKAGE
RoHS 5/6 COMPLIANT
HV52-xxx SERIES ±50PPM
HV53-xxx SERIES ±100PPM
HV54-xxx SERIES ±20PPM
HV55-xxx SERIES ±10PPM
TEMPERATURE RANGE: 0 to 70°C
14 PIN 5.0V HCMOS VCXO
HIGH FREQUENCIES
Vx017 13 02/25/09
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
ORDERING INFORMATION
FEATURES
DESCRIPTION
CW 0907
HV52-150
44.736M
HV51-xxx Series
HV55-xxx Series
HV54-xxx Series
HV53-xxx Series
HV52-xxx Series
VCXO
SERIES
CENTER
FREQUENCY
HV52-150 - 044.736M
ABSOLUTE MAXIMUM RATINGS TABLE 1.0
PARAMETER UNITS MINIMUM NOMINAL MAXIMUM UNITS NOTE
Storage Temperature -40 - 85 °C
Supply Voltage (Vcc) -0.5 - 7 Vdc
Control Voltage (Vc) -0.5 - 7 Vdc
MODEL SPECIFICATIONS
MODEL NUMBER TABLE 2.0
HV51-xxx Frequency Stability: -25 - 25 ppm 1
HV52-xxx Frequency Stability: -50 - 50 ppm 1
HV53-xxx Frequency Stability: -100 - 100 ppm 1
HV54-xxx Frequency Stability: -20 - 20 ppm 1
HV55-xxx Frequency Stability: -10 - 10 ppm 1
Pullability Codes (xxx - Add code to the end of the Model Number) TABLE 3.0
040 Frequency Pullability: ±20 - - ppm 2
100 Frequency Pullability: ±50 - - ppm 2
150 Frequency Pullability: ±75 - - ppm 2
160 Frequency Pullability: ±80 - - ppm 2
200 Frequency Pullability: ±100 - - ppm 2, 3
300 Frequency Pullability: ±150 - - ppm 2, 3
OPERATING SPECIFICATIONS TABLE 4.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Frequency Range (Fo) 30 - 100 MHz
Operating Temperature Range 0 - 70 °C
Supply Voltage (Vcc) 4.75 5.0 5.25 Vdc
Supply Current <50 MHz (Icc) - - 35 mA
>50MHz - - 60 mA
Period Jitter - 3 5 ps rms
Phase Jitter (BW=12kHz to 20MHz) - 0.5 1 ps rms
SSB Phase Noise at 100Hz offset - -90 - dBc/Hz
SSB Phase Noise at 1KHz offset - -100 - dBc/Hz
SSB Phase Noise at 10KHz offset - -125 - dBc/Hz
SSB Phase Noise at 100KHz offset - -135 - dBc/Hz
INPUT CHARACTERISTICS TABLE 5.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
Control Voltage Range (Vc) 0.5 2.5 4.5 Vdc
Center Frequency 2.0 2.5 3.0 Vdc
Monotonic Linearity -15 - 15 %
Input Impedance - 50K - Ohm
Modulation Bandwidth (3dB) 15 --KHz
HCMOS OUTPUT CHARACTERISTICS TABLE 6.0
PARAMETER MINIMUM NOMINAL MAXIMUM UNITS NOTE
LOAD - - 15 pF
Voltage (High) (Voh) 4.5 - - Vdc
(Low) (Vol) - - 0.5 Vdc
Current (30 MHz to 52 MHz) (High) (Ioh) -8 --mA
(30 MHz to 52 MHz) (Low) (Ioh) - - 8 mA
Current (52.1 MHz to 100 MHz) (High) (Ioh) -16 --mA
(52.1 MHz to 100 MHz) (Low) (Ioh) - - 16 mA
Duty Cycle at 50% of Vcc 40 50 60 %
Optional Duty Cycle add suffix S 45 50 55 % 4
PRODUCT DATA SHEET
Specifications subject to change without notice.
DATA SHEET #: REV: DATE:
PAGE OF Copyright 2008 Connor-Winfield all rights reserved.
a
CRYSTAL CONTROLLED OSCILLATORS
22
Vx017 13 02/25/09
THE CONNOR-WINFIELD CORP.
2111 COMPREHENSIVE DRIVE.
AURORA, IL 60505.
FAX (630) 851-5040.
PHONE (630) 851-4722.
WWW.CONWIN.COM
HV52 150 044.736M
--
Output Frequency:
Frequency Format
-xxx.xM Min.*
-xxx.xxxxxxM Max.*
*Amount of numbers
after the decimal point.
M = MHz
Pullability:
Minimum Deviation of
+/-75ppm with
0.5 to 4.5V
Control Voltage
VCXO Series
Example Part Number
Test Circuit
Package Outline and Pin Connections Solder Profile
100°C
150°C
225°C
25°C
183°C
360 Sec. Max.
60-120s
Max. 60-150s Max.
Time
Temperature 225°C
0
tp
Ramp-Down Rate
6°C/second max.
10-30s
Ramp-Up Rate
3°C/second max.
from 150°C to 225°C.
Note:
1) Frequency stability vs. change in temperature, referenced to frequency measured at
25°C with control voltage @ 2.50Vdc.
2) Referenced to Fo @ 25°C. Positive Slope.
3) –200 not available above 75 MHz. 300 not available above 50 MHz.
4) Add suffix S to the part number (Example HV51-150S-044.736M).
PACKAGE CHARACTERISTICS TABLE 7.0
Package Hermetically sealed, metal package.
Soldering Process RoHS 5/6 compliant. See solder profile on page 2.