TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS SLOS097C - MARCH 1991 - REVISED AUGUST 1996 D D D D D D Wide Gain-Bandwidth Product . . . 4.5 MHz High Slew Rate . . . 13 V/s Fast Settling Time . . . 1.1 s to 0.1% Wide-Range Single-Supply Operation 4 V to 44 V Wide Input Common-Mode Range Includes Ground (VCC -) Low Total Harmonic Distortion . . . 0.02% D D D D D D Low Input Offset Voltage . . . 3 mV Max (A Suffix) Large Output Voltage Swing - 14.7 V to 14 V (With 15-V Supplies) Large Capacitance Drive Capability 10,000 pF Excellent Phase Margin . . . 60 Excellent Gain Margin . . . 12 dB Output Short-Circuit Protection D OR P PACKAGE (SINGLE, TOP VIEW) OFSET N1 IN - IN + VCC - /GND 1 8 2 7 3 6 4 5 D OR P PACKAGE (DUAL, TOP VIEW) 1OUT 1IN - 1IN + VCC - /GND NC VCC + OUT OFSET N2 DW PACKAGE (QUAD, TOP VIEW) 1OUT 1IN - 1IN + VCC + 2IN + 2IN - 2OUT NC 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 1 8 2 7 3 6 4 5 VCC + 2OUT 2IN - 2IN + N PACKAGE (QUAD, TOP VIEW) 4OUT 4IN - 4IN + VCC - /GND 3IN + 3IN - 3OUT NC 1OUT 1IN - 1IN + VCC + 2IN + 2IN - 2OUT 1 14 2 13 3 12 4 11 5 10 6 9 7 8 4OUT 4IN - 4IN + VCC - /GND 3IN + 3IN - 3OUT NC - No internal connection AVAILABLE OPTIONS PACKAGE TA COMPLEXITY 0C to 70C PLASTIC DIP SMALL OUTLINE STANDARD GRADE PRIME GRADE STANDARD GRADE PRIME GRADE Single Dual Quad TL34071P TL34072P TL34074N TL34071AP TL34072AP TL34074AN TL34071D TL34072D TL34074DW TL34071AD TL34072AD TL34074ADW - 40C 40 C to 105C Single g Dual Quad TL33071P TL33072P TL33074N TL33071AP TL33072AP TL33074AN TL33071D TL33072D TL33074DW TL33071AD TL33072AD TL33074ADW - 55C 55 C to 125C Single g Dual Quad TL35071P TL35072P TL35074N TL35071AP TL35072AP TL35074AN TL35071D TL35072D TL35074DW TL35071AD TL35072AD TL35074ADW D and DW packages are available taped and reeled. Add R suffix to device type (e.g., TL34071ADR). Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. Copyright 1996, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS SLOS097C - MARCH 1991 - REVISED AUGUST 1996 description Quality, low cost, bipolar fabrication with innovative design concepts are employed for the TL33071/2/4, TL34071/2/4, and TL35071/2/4 series of monolithic operational amplifiers. This series of operational amplifiers offers 4.5 MHz of gain bandwidth product, 13 V/s slew rate, and fast settling time without the use of JFET device technology. Although this series can be operated from split supplies, it is particularly suited for single-supply operation since the common-mode input voltage range includes ground potential (VCC -). With a Darlington transistor input stage, this series exhibits high input resistance, low input offset voltage, and high gain. The all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing, provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency output impedance, and symmetrical source/sink ac frequency response. The TL34071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified over the commercial (0C to 70C) temperature range. The TL33071/2/4 devices are available in standard or prime performance (A-suffix) grades and are specified over industrial/vehicular (- 40C to 105C) temperature range. The TL35071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified over the military (- 55C to 125C) temperature range. These low-cost amplifiers are available in single, dual, and quad configurations and are pin compatible with the MC33071/2/4, MC34071/2/4, and MC35071/2/4 series of amplifiers. Packaging options include standard plastic DIP and SO packages. symbol Single Dual and Quad (per amplifier) OFFSET N1 IN + IN - + - IN + + IN - - OUT OFFSET N2 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 OUT TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS SLOS097C - MARCH 1991 - REVISED AUGUST 1996 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V Supply voltage, VCC - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 22 V Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 V Input voltage, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 mA Output current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Total current out of VCC - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 mA Duration of short-circuit current at (or below) 25C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table Operating free-air temperature range, TA: TL3307x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40C to 105C TL3407x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C TL3507x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 125C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds: D, DW, N, or P package . . . . . . . . . 260C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC -. 2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows if input is brought below VCC - - 0.3 V. 3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation rating is not exceeded. DISSIPATION RATING TABLE PACKAGE D DW N P TA 25C POWER RATING 725 mW 1025 mW 1150 mW 1000 mW DERATING FACTOR ABOVE TA = 25C TA = 70C POWER RATING TA = 105C POWER RATING TA = 125C POWER RATING 5.8 mW/C 8.2 mW/C 9.2 mW/C 8.0 mW/C 464 mW 656 mW 736 mW 640 mW 261 mW 369 mW 414 mW 360 mW 145 mW 205 mW 230 mW 200 mW recommended operating conditions TL3307x Supply voltage, VCC Common mode input voltage, voltage VIC Common-mode VCC = 5 V VCC = 15 V Operating free-air temperature, TA POST OFFICE BOX 655303 TL3407x TL3507x MIN MAX MIN MAX MIN MAX 2 22 2 22 2 22 0 2.7 0 2.9 0 2.7 - 15 12.7 - 15 12.9 - 15 12.7 - 40 105 0 70 - 55 125 * DALLAS, TEXAS 75265 UNIT V V C 3 TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS SLOS097C - MARCH 1991 - REVISED AUGUST 1996 electrical characteristics at specified free-air temperature, VCC = 15 V (unless otherwise noted) PARAMETER VIO Temperature coefficient of input offset voltage IIO Input offset current VCC = 5 V 25C 0.5 3 1.5 5 25C 0.5 3 1.0 5 VCC = 15 V VIC = 0, VO = 0, 0 RS = 50 VCC = 15 V VCC = 15 V VCC = 5 V IIB Input bias current VCC = 15 V VICR VOH VOL Common-mode input voltage range Hi h l l output t t voltage lt High-level L l l output t t voltage lt Low-level MIN 5 Full range 10 25C 7 Full range 25C - 0.8 100 7 - 0.7 Full range 100 250 -2 - 0.8 - 2.3 25C - 1.5 - 0.7 - 1.8 25C Full range - 15 to 12.8 - 15 to 12.8 - 1.5 3.7 4 3.7 4 RL = 10 k 25C 13.6 14 13.6 14 RL = 2 k Full range 13.4 V 13.4 VCC + = 5 V, VCC - = 0, RL = 2 k 25C 0.1 0.3 0.1 0.3 RL = 10 k 25C - 14.7 - 14.3 - 14.7 - 14.3 RL = 2 k Full range IOS Short circuit output current Short-circuit CMRR Common-mode rejection ratio VIC = VICRmin,, RS = 50 kSVR Supply-voltage y g rejection j ratio (VCC /VIO) VCC = 13.5 V to 16.5 V, RS = 100 25 Source: VID = 1 V, VO = 0 No Load 100 - 13.5 25 100 V/mV 20 - 30 - 10 - 30 20 30 20 30 25C 80 97 70 97 dB 25C 80 97 70 97 dB 25C 3.5 Full range VCC + = 5 V, VCC - = 0, VO = 0, No Load V - 10 25C Sink: VID = - 1 V, VO = 0 VO = 0 0, - 13.5 Full range A V 25C VO = 10 V V, RL = 2 k nA - 1.8 - 15 to 13.2 50 mV -2 - 2.3 - 15 to 13.2 25C UNIT V/C 10 250 Full range MAX 7 VCC + = 5 V, VCC - = 0, RL = 2 k Large-signal g g differential voltage amplification Supply y current (per channel) MIN Full range RS = 50 AVD ICC TL3x07x TYP TA Input offset voltage VIO TL3x07xA TYP MAX TEST CONDITIONS 25C 4.5 3.5 4.7 3.4 4.4 mA 4.5 4.7 3.4 4.4 mA Full range 4.6 4.6 Full range is 0C to 70C for the TL3407x devices, and - 40C to 105C for the TL3307x devices, and - 55C to 125C for the TL3507x devices. All typical values are at TA = 25C. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A HIGH-SLEW-RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS SLOS097C - MARCH 1991 - REVISED AUGUST 1996 operating characteristics, VCC = 15 V, TA = 25C PARAMETER TEST CONDITIONS SR + Positive slew rate SR - Negative slew rate VI = - 10 V to 10 V,, RL = 2 k ts Settling time AVD = - 1 1, 10 10-V V step Vn In Equivalent input noise voltage f = 1 kHz, Equivalent input noise current THD GBW AV = 1 AV = - 1 TL3x07xA MIN TYP 8 10 TL3x07x MAX MIN TYP 8 10 MAX UNIT V/s 13 13 To 0.1% 1.1 1.1 To 0.01% 2.2 2.2 32 32 nV/Hz f = 1 kHz 0.22 0.22 pA/Hz Total harmonic distortion VO = 2 V to 20 V, RL = 2 k, AVD = 10, f = 10 kHz 0 02 0.02 0 02 0.02 % Gain-bandwidth product f =100 kHz 4.5 MHz BW Power bandwidth RL = 2 k,, AVD = 1, VO(PP) = 20 V,, THD = 5.0% 200 200 kHz m Phase margin RL = 2 k, CL = 0 60 60 RL = 2 k, CL = 300 pF 40 40 RL = 2 k, CL = 0 12 12 RL = 2 k, CL = 300 pF 4 4 Gain margin RS = 100 3.5 4.5 3.5 s dB ri Differential input resistance 150 M Input capacitance VIC = 0 VIC = 0 150 Ci 2.5 2.5 pF Channel separation f = 10 kHZ 120 120 dB Open-loop output impedance f = 1 MHZ 30 30 zo POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 IMPORTANT NOTICE Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue any product or service without notice, and advise customers to obtain the latest version of relevant information to verify, before placing orders, that information being relied on is current and complete. All products are sold subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those pertaining to warranty, patent infringement, and limitation of liability. TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE ("CRITICAL APPLICATIONS"). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO BE FULLY AT THE CUSTOMER'S RISK. In order to minimize risks associated with the customer's applications, adequate design and operating safeguards must be provided by the customer to minimize inherent or procedural hazards. TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right of TI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. TI's publication of information regarding any third party's products or services does not constitute TI's approval, warranty or endorsement thereof. Copyright 1999, Texas Instruments Incorporated