TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW -RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
1
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
D
Wide Gain-Bandwidth Product...4.5 MHz
D
High Slew Rate...13 V/µs
D
Fast Settling Time . . . 1.1 µs to 0.1%
D
Wide-Range Single-Supply Operation
4 V to 44 V
D
Wide Input Common-Mode Range Includes
Ground (VCC)
D
Low Total Harmonic Distortion...0.02%
D
Low Input Offset Voltage ...3 mV Max
(A Suffix)
D
Large Output Voltage Swing
14.7 V to 14 V (With ±15-V Supplies)
D
Large Capacitance Drive Capability
10,000 pF
D
Excellent Phase Margin...60°
D
Excellent Gain Margin...12 dB
D
Output Short-Circuit Protection
1
2
3
4
8
7
6
5
OFSET N1
IN
IN+
VCC/GND
NC
VCC+
OUT
OFSET N2
D OR P PACKAGE
(SINGLE, TOP VIEW)
NC – No internal connection
1
2
3
4
8
7
6
5
1OUT
1IN
1IN+
VCC/GND
VCC+
2OUT
2IN
2IN+
D OR P PACKAGE
(DUAL, TOP VIEW)
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
1OUT
1IN
1IN+
VCC+
2IN+
2IN
2OUT
NC
4OUT
4IN
4IN+
VCC/GND
3IN+
3IN
3OUT
NC
(QUAD, TOP VIEW)
DW PACKAGE
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN
1IN+
VCC+
2IN+
2IN
2OUT
4OUT
4IN
4IN+
VCC/GND
3IN+
3IN
3OUT
N PACKAGE
(QUAD, TOP VIEW)
AVAILABLE OPTIONS
PACKAGE
TA
COMPLEXITY
PLASTIC DIP SMALL OUTLINE
TA
COMPLEXITY
STANDARD
GRADE PRIME
GRADE STANDARD
GRADE PRIME
GRADE
0°CSin
g
le TL34071P TL34071AP TL34071D TL34071AD
to
Single
Dual
TL34071P
TL34072P
TL34071AP
TL34072AP
TL34071D
TL34072D
TL34071AD
TL34072AD
70°CQuad TL34074N TL34074AN TL34074DW TL34074ADW
–40°CSingle TL33071P TL33071AP TL33071D TL33071AD
40 C
to
g
Dual TL33072P TL33072AP TL33072D TL33072AD
105°CQuad TL33074N TL33074AN TL33074DW TL33074ADW
–55°CSingle TL35071P TL35071AP TL35071D TL35071AD
55 C
to
g
Dual TL35072P TL35072AP TL35072D TL35072AD
125°CQuad TL35074N TL35074AN TL35074DW TL35074ADW
D and DW packages are available taped and reeled. Add R suffix to device type (e.g., TL34071ADR).
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright 1996, Texas Instruments Incorporated
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW -RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
2POST OFFICE BOX 655303 DALLAS, TEXAS 75265
description
Quality, low cost, bipolar fabrication with innovative design concepts are employed for the TL33071/2/4,
TL34071/2/4, and TL35071/2/4 series of monolithic operational amplifiers. This series of operational amplifiers
offers 4.5 MHz of gain bandwidth product, 13 V/µs slew rate, and fast settling time without the use of JFET device
technology. Although this series can be operated from split supplies, it is particularly suited for single-supply
operation since the common-mode input voltage range includes ground potential (VCC). With a Darlington
transistor input stage, this series exhibits high input resistance, low input offset voltage, and high gain. The
all-npn output stage, characterized by no dead-band crossover distortion and large output voltage swing,
provides high-capacitance drive capability, excellent phase and gain margins, low open-loop high-frequency
output impedance, and symmetrical source/sink ac frequency response.
The TL34071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are specified
over the commercial (0°C to 70°C) temperature range. The TL33071/2/4 devices are available in standard or
prime performance (A-suffix) grades and are specified over industrial/vehicular (–40°C to 105°C) temperature
range. The TL35071/2/4 devices are avaliable in standard or prime performance (A-suffix) grades and are
specified over the military (–55°C to 125°C) temperature range. These low-cost amplifiers are available in
single, dual, and quad configurations and are pin compatible with the MC33071/2/4, MC34071/2/4, and
MC35071/2/4 series of amplifiers. Packaging options include standard plastic DIP and SO packages.
symbol
+
+
OFFSET N1
IN+
IN
OFFSET N2
OUT
Single
OUT
IN+
IN
Dual and Quad
(per amplifier)
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW -RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
3
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
Supply voltage, VCC+ (see Note 1) 22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply voltage, VCC 22 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID (see Note 2) ±44 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, VI (any input) VCC±
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current, II (each input) ±1 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO ±80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current into VCC+ 80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current out of VCC 80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of short-circuit current at (or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: TL3307x –40°C to 105°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL3407x 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TL3507x –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1.6 mm (1/16 inch) from case for 10 seconds: D, DW, N, or P package 260°C. . . . . . . . .
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC.
2. Differential voltages are at the noninverting input with respect to the inverting input. Excessive current flows if input is brought below
VCC0.3 V.
3. The output can be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA 25°CDERATING FACTOR TA = 70°C TA = 105°C TA = 125°C
PACKAGE
A
POWER RATING ABOVE TA = 25°C
A
POWER RATING
A
POWER RATING
A
POWER RATING
D725 mW 5.8 mW/°C 464 mW 261 mW 145 mW
DW 1025 mW 8.2 mW/°C 656 mW 369 mW 205 mW
N 1150 mW 9.2 mW/°C 736 mW 414 mW 230 mW
P1000 mW 8.0 mW/°C 640 mW 360 mW 200 mW
recommended operating conditions
TL3307x TL3407x TL3507x
UNIT
MIN MAX MIN MAX MIN MAX
UNIT
Supply voltage, VCC±±2±22 ±2±22 ±2±22 V
Common mode in
p
ut voltage VIC
VCC = 5 V 0 2.7 0 2.9 0 2.7
V
Common
-
mode
inp
u
t
v
oltage
,
V
IC VCC± = ±15 V –15 12.7 –15 12.9 –15 12.7
V
Operating free-air temperature, TA–40 105 0 70 –55 125 °C
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW -RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
4POST OFFICE BOX 655303 DALLAS, TEXAS 75265
electrical characteristics at specified free-air temperature, VCC± = ±15 V (unless otherwise noted)
TEST CONDITIONS
T
TL3x07xA TL3x07x
TEST
CONDITIONS
T
A
MIN TYPMAX MIN TYPMAX UNIT
VCC = 5 V 25°C 0.5 3 1.5 5
VIO Input offset voltage
VCC =±15 V
25°C 0.5 3 1.0 5 mV
V
CC =
±15
V
Full range 5 7
αVIO Temperature coefficient
of input offset voltage VIC = 0,
V0
VCC = ±15 V Full range 10 10 µV/°C
IIO
In
p
ut offset current
V
O =
0
,
RS
=
50
VCC =±15 V
25°C 7 100 7 100
nA
I
IO
Inp
u
t
offset
c
u
rrent
RS
=
50
V
CC =
±15
V
Full range 250 250
nA
VCC =5V
25°C 0.8 –2 0.8 –2
IIB
In
p
ut bias current
V
CC =
5
V
Full range 2.3 2.3
µA
I
IB
Inp
u
t
bias
c
u
rrent
VCC =±15 V
25°C 0.7 1.5 0.7 1.5 µ
A
V
CC =
±15
V
Full range 1.8 1.8
VICR
Common-mode input
RS=50
25°C15
to
13.2
15
to
13.2
V
V
ICR voltage range
R
S =
50
Full range 15
to
12.8
15
to
12.8
V
V
Hi h l l t t lt
VCC+ = 5 V, VCC = 0,
RL = 2 k25°C 3.7 4 3.7 4
V
VOH High-level output voltage RL = 10 k25°C 13.6 14 13.6 14 V
RL = 2 kFull range 13.4 13.4
V
Lllttlt
VCC+ = 5 V, VCC = 0,
RL = 2 k25°C 0.1 0.3 0.1 0.3
V
VOL Low-level output voltage RL = 10 k25°C 14.7 14.3 14.7 14.3 V
RL = 2 kFull range 13.5 13.5
AVD
Large-signal differential
VO=±10 V RL=2k
25°C 50 100 25 100
V/mV
A
VD
gg
voltage amplification
V
O =
±10
V
,
R
L =
2
k
Full range 25 20
V/mV
IOS
Short circuit out
p
ut current
Source: VID = 1 V, VO = 0
25
°
C
–10 –30 –10 –30
mA
I
OS
Short
-
circ
u
it
o
u
tp
u
t
c
u
rrent
Sink: VID = –1 V, VO = 0
25°C
20 30 20 30
mA
CMRR
Common-mode V
IC
= V
ICR
min,
25
°
C
80
97
70
97
dB
CMRR
rejection ratio
IC ICR ,
RS = 50
25°C
80
97
70
97
dB
kSVR
Supply-voltage rejection VCC± = ±13.5 V
25
°
C
80
97
70
97
dB
k
SVR
ygj
ratio (VCC±/VIO)
CC±
to ±16.5 V, RS = 100
25°C
80
97
70
97
dB
VO=0
No Load
25°C 3.5 4.5 3.5 4.5
ICC
Supply current
V
O =
0
,
No
Load
Full range 4.7 4.7
mA
I
CC
y
(per channel) VCC+ = 5 V, VCC = 0, 25°C 3.4 4.4 3.4 4.4
mA
VO = 0, No Load Full range 4.6 4.6
Full range is 0°C to 70°C for the TL3407x devices, and –40°C to 105°C for the TL3307x devices, and –55 °C to 125°C for the TL3507x devices.
All typical values are at TA = 25°C.
TL3x071, TL3x071A, TL3x072, TL3x072A, TL3x074, TL3x074A
HIGH-SLEW -RATE, SINGLE-SUPPLY OPERATIONAL AMPLIFIERS
SLOS097C – MARCH 1991 – REVISED AUGUST 1996
5
POST OFFICE BOX 655303 DALLAS, TEXAS 75265
operating characteristics, VCC± = ±15 V, TA = 25°C
PARAMETER
TEST CONDITIONS
TL3x07xA TL3x07x
UNIT
PARAMETER
TEST
CONDITIONS
MIN TYP MAX MIN TYP MAX
UNIT
SR+ Positive slew rate V
I
= –10 V to 10 V, AV = 1 8 10 8 10
V/µs
SR Negative slew rate
I,
RL = 2 kAV = –1 13 13
V/
µ
s
t
Settling time
AVD = 1 10 V ste
pTo 0.1% 1.1 1.1
µs
t
s
Settling
time
A
VD = –
1
,
10
-
V
step
To 0.01% 2.2 2.2 µ
s
VnEquivalent input noise voltage f = 1 kHz, RS = 100 32 32 nV/Hz
InEquivalent input noise current f = 1 kHz 0.22 0.22 pA/Hz
THD
Total harmonic distortion
VO = 2 V to 20 V, RL = 2 k,
002
002
%
THD
Total
harmonic
distortion
AVD = 10, f = 10 kHz
0
.
02
0
.
02
%
GBW Gain-bandwidth product f =100 kHz 3.5 4.5 3.5 4.5 MHz
BW
Power bandwidth
R
L
= 2 k, V
O(PP)
= 20 V,
200
200
kHz
BW
Po
w
er
band
w
idth
L,
AVD = 1,
O(PP) ,
THD = 5.0%
200
200
kH
z
φ
Phase margin
RL = 2 k, CL = 0 60°60°
φ
m
Phase
margin
RL = 2 k, CL = 300 pF 40°40°
Gain margin
RL = 2 k, CL = 0 12 12
dB
Gain
margin
RL = 2 k, CL = 300 pF 4 4
dB
riDifferential input resistance VIC = 0 150 150 M
CiInput capacitance VIC = 0 2.5 2.5 pF
Channel separation f = 10 kHZ 120 120 dB
zoOpen-loop output impedance f = 1 MHZ 30 30
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty . Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICA TIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright 1999, Texas Instruments Incorporated