CA Threaded Catalog
2www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Proven Quality, Reliability & Expertise
ITT Cannon is a leading global manufacturer of connector products
serving international customers in the aerospace and defense,
medical, energy, transportation and industrial end markets.
Whether delivering critical specs to aircraft pilots, streaming data
through
communications satellites or giving expectant parents a
first look at their
unborn children, Cannon connects the world’s most
important information
to the people who need it.
About ITT
ITT is a diversified leading manufacturer of highly engineered
critical components and customized technology solutions for
the energy, transportation and industrial markets. Building on
its heritage of innovation, ITT partners with its customers to
deliver enduring solutions to the key industries that underpin
our modern way of life.
Founded in 1920, ITT is headquartered in White Plains, N.Y.,
with employees in more than 35 countries and sales in a total
of approximately 125 countries.
For more information,
visit www.itt.com.
In 2015, Cannon celebrated 100 years that helped
make history. Cannon products were used in the first
“talking" movies and helped transmit the first messages
home from the moon. Today we proudly continue our
legacy of innovating to connect the world and inspire
the successes of the next century – because amazing
things happen when great things connect.
3www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Our connector portfolio remains
the most extensive in the industry.
Offering a reliable and cost effective range of
interconnect solutions.
Medical
Oil & Gas
Commercial & Military Aerospace
Heavy Equipment
Rail
lndustrial / lnstrumentation
Defense Vehicles
4www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured CA Threaded products.
Introduction
Features and benefits
CA Threaded offers a range of features and benefits to customers in all kind of industrial and heavy vehicle markets:
• Threaded coupling mechanism offering extraordinary vibration resistance
• A wide range of contacts for both solder and crimp applications allowing to connect the full wire range up to 50mm²
cross section
• An extensive range of backshells offering connections of all typical cable solutions with individual wires or jacket cables in
shielded or unshielded versions
• Materials that allow to meet the stringent requirements of industrial and especially heavy vehicle markets as
– temperatures ranging from –55°C up to +200°C
– media resistance* as brake liquids, gasoline, lubricants and others
– RoHS compliant product versions
Contact us for detail or your request for a customized solution.
*short time wetting
ITT Cannon’s circular metal connector series CA Threaded is one of
the market standards for harsh environment applications in commercial
as well as military applications. Derived from the military standard
MIL-C-5015 the product portfolio expanded to meet the needs of
industrial and heavy vehicle applications around the
globe. As a result
the commercial offering exceeds the military portfolio by
more than 30%.
5www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Select your product using the “ordering reference” option
Use the detail pages to better understand the available
options like connector styles, contact arrangements and
contacts options
Add accessories and tooling options on the related
pages. A connector assembly instruction is available upon
request or visit www.ittcannon.com
Use the contact information on the back cover to contact
us for further questions or to get advise on where you can
purchase our products
1
2
3
4
How to use
This catalog is split in several sections to provide…
• A brief introduction to ITT Cannon and CA Threaded
• A general overview of the CA Threaded product lines
• Detailed product information including contact arrangements,
performance and part number data
• Detailed supporting information including accessories and tooling
The fastest way to find your product of choice is to follow these steps
6www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
How to use this catalogue ......................................5
Product overview ...................................................7
Ordering reference .................................................8
Contact arrangements ................ .......................9-21
Mounting dimensions ..........................................22
Separating and coupling dimensions ....................23
Wall mounting receptacles ..............................24-26
Cable connecting plugs ...................................27-29
Box mounting receptacles ...............................30-31
Straight and right angle plugs .........................32-36
Accessories .....................................................37-41
Contacts .........................................................42-43
CA Layout Overview.........................................44-45
Tooling............................................................46-47
Table of contents
7www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Product overview
ELECTRICAL DATA
Contact Rating at 20°C (68°F), ambient temperature
Contact size (AWG/metric) Rated Current (A
max.) ¹
20/10 8
16S /15S 22
16 /15 22
12 41
8/60/100 74
4 /160 135
0 /500 245
¹ This applies only to the max. rated current for one contact. If several contacts
in one contact arrangement are loaded with higher current the temperature
may not exceed 125°C
Rated Current vs. Ambient Temperature
Contacts Resistance (Millivolt test)
Contact size Contact resistance
(AWG /metric) mΩ max.
20 /10 12,0
16S /15S 6,0
16 /15 6,0
12/25 3,0
8 /100 1,0
4 /160 0,3
0 /500 0,2
Insulation Resistance
Standard insulator material >1000 MΩ
FKM insulator material (upon request) >5000 MΩ
Air and Creepage Path (min.)
Voltage class Instr. A D E
Air path, mm 0,7 1,1 2,8 4,8
Creepage path, mm 0,7 1,1 2,8 4,8
Operation Voltage
Operating voltage for CA Threaded connectors is limited to 50VAC / 75VDC according to
the safety regulations defined in the European Low Voltage Directive (LVD) 2014/35/EU.
For other uses or regions please see appropriate regional regulations.
Test voltage
Service rating Test voltage Vrms
Instruments 1050
A 1600
B 4500
D 2500
E 3000
MECHANICAL FEATURES
Ambient temperature
Neoprene: –55/125°C (– 67/257°F), FKM: –30/200°C (– 22/392°F)*
ENVIRONMENTAL SEALING
Up to IP 65 (in mated condition) Acc. to DIN EN 60068-1
Mating Cycles min. 500
Min. Separating Force per Contact
Contact size Separating force
metric AWG N min
10 20 0,3
15S /15 16S /16 1,0
25 12 1,5
60/100 8 3,0
160 4 4,0
500 0 8,5
Contact Retention Apply test force in mating direction
Contact size Test force
metric AWG N
10 20 30
15S /15 16S /16 35
25 12 55
60/100 8 80
160 4 90
500 0 95
Coupling Torque
The admissible coupling torque has to be tested under harnessed condition
Admissible torque
Shell size Closing and opening (Nmmax)Opening (Nmmin)
10SL 3,0 0,15
12S 2,8 0,23
14S 5,9 0,35
16S/16 7,0 0,46
18 8,0 0,58
20 9,0 0,70
22 10,6 0,80
24 12,9 0,80
28 16,7 0,92
32 18,1 1,02
36 23,9 1,05
Materials
Shell Aluminum alloy
Contacts Copper alloy, silver plated or gold plated
Insulator / Grommet Polychloroprene (Standard)
FKM (High temperature)
* consult factory
8www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
This document solely applies to European manufactured CA Threaded products.
Ordering reference
Series CA – Cannon Designation
Shell type
3100 – Wall mounting receptacle see page 24-26
3101 – Cable connecting plug see page 27-29
3102 – Box mounting receptacle see page 30-31
20 – Box mounting receptacle, rear mounting see page 30-31
3106 – Plug, straight see page 32-34
3108 – Plug, 90° see page 35
Class
E – Backshell with cable clamp¹
F – Backshell for flex tube
PG – Adapter for PG-termination
ME – Adapter for Metric-termination
L – PCB solder termination
R – Short backshell, no strain relief
Shell size
10SL, 12S, 14S, 16, 16S, 18, 20, 22, 24, 28, 32, 36
Contact arrangement see page 9-21
Contact type
P – pin
S – socket
Insulator position see page 9-19
Modification
13 – shielded version, solder pot contacts, no grounding spring
14 – shielded version, metric crimp contacts, no grounding spring
15 – shielded version, AWG crimp contacts, no grounding spring
48 – F backshell with O-ring seal without ferrule and grommet
83 – Grounding spring on the barrel
A176 – Contacts gold plated see page 42-43
A232 – Zinc cobalt black plating, RoHS compliant
A233 – Zinc cobalt green plating, RoHS compliant
A240 – Zinc nickel plating, blue iridescent, RoHS compliant
BM29 – Threaded flange holes, shell styles 02, 20 and 00
DN – Adapter for heat shrink boots
F0 – Without contacts (to be ordered separately)
F42 – Without backshell, grommet and ferrule
F80 – AWG Crimp contacts
F137 – O-ring under the coupling nut ²
F183 – Metric Crimp contacts
¹ except shell style 02 / 20 ² a number of plugs are already featured with this O-ring
Part number explanation CA E P W F1833106 18-1
9www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special polarization
310SL-3
16S
A
– – – – – –
210SL-4
16S
A
–
–
–
–
–
–
♦212S-3
16S
A
70
145
215
290
–
–
112S-4
16S
D
–
–
–
–
–
–
412SA10
16S
Instr.
–
–
–
–
3
8
110
250
314S-1
16S
A
–
–
–
–
–
–
414S-2
16S
Instr.
–
120
240
–
–
–
114S-4
16S
D
–
–
–
–
–
–
514S-5
16S
Instr.
–
110
–
–
–
–
614S-6
16S
Instr.
–
–
–
–
–
–
♦314S-7
16S
A
90
180
270
–
–
214S-9
16S
Instr.
70
145
215
290
–
–
714SA7
16S
Instr.
–
–
–
–
–
–
♦716S-1
16S
A
80
–
–
280
–
–
216S-4
16S
D
35
110
250
325
–
–
♦316S-5
16S
A
70
145
215
290
–
–
516S-8
16S
A
–
170
265
–
–
–
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
10 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
3
2
1
16-7
16
8
A
80
110
250
280
–
–
4
2
2
16-9
12
16
A
35
110
250
325
–
–
♦316-10
12
A
90
180
270
–
–
–
216-11
12
A
35
110
250
325
–
–
116-12
4
A
–
–
–
–
–
–
216A11
12
A
35
110
250
325
–
–
♦10 18-1
16
A (B, C,
F, G) Instr.
(all others)
70
145
215*
290
–
–
218-3
12
D
35
110
250
325
–
–
418-4
16
D
35
110
250
325
– –
3
2
1
18-5
12
16
D
80
110
250
280
–
–
118-6
4
D
–
–
–
–
– –
118-7
8
D
–
–
–
–
–
–
8
1
7
18-8
12
16
A
70
–
–
290
–
–
7
2
5
18-9
12
16
Instr.
80
110
250
280
–
–
4
18-10
12
A
–
120
240
–
–
–
518-11
12
A – 170 265 – – –
618-12
16
A 80 – – 280 – –
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
*Caution: This insulator rotation is not recommended as it can mate with normal rotation connectors.
11www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
♦4
1
3
18-13
8
12
A
80
110
250
280
–
–
7
2
5
18-17
12
16
Instr.
–
–
–
–
12
100
10 18-19
16
A – 120 240 – – –
518-20
16
A 90 180 270 – –
318-21
12
A – – – – – –
318-22
16
D 70 145 215 290 – –
120-2
0
D – – – – – –
320-3
12 D
70
145
215
290
–
–
420-4
12
D 45 110 250 – – 250
(20A37)
320-6
16
D – – – – – –
820-7
16
A (C, D, E, F) D
(A, B,
H, G)
80
110
250
280
–
–
6
2
4
20-8
8
16
In str.
80
110
250
280
–
–
13 20-11
16
In str. – – – – – –
5
3
2
20-14
12
8
A 80 110 250 280 – –
720-15
12
A 80 – – 280 – –
9
2
7
20-16
12
16
A
80
110
250
280
–
–
6
5
1
20-17
12
16
A
90
180
270
–
–
–
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
12 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service
rating
Insulator position
W X Y Z
Position Special
polarization
9
3
6
20-18
12
16
A
35
110
250
325
–
–
3 20-19
8
A 90 180 270 – – –
6
3
3
20-22
8
16
A
80
♦
110
♦
250
280
–
–
220-23
8
A
35
110
250
325
–
–
4
2
2
20-24
8
16
A 35 110 250 325 – –
14 20-27
16
A 35 110 250 325 – –
17 20-29
16
A 80 – – 280 – –
11 20-33
16
A – – – 2
3
17
260
110
130
–
920A9
12
Instr.
(all others)
–
110
250
–
–
–
24 20A24
20
– – – – – – –
No solder pot contacts available for #10/20
19 20A48
16
Instr. – 80 280 – – –
222-1
8
D 35 110 250 325 – –
322-2
8
D 70 145 215 290 – –
4
2
2
22-4
8
12
A
5
110
250
325
–
–
6
2
4
22-5
12
16
D
35
110
250
325
–
–
122-7
0
E
–
–
–
–
–
–
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
*Reduced contact termination 0,3mm2.
13www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
222-8
12
E
35
110
250
325
–
–
322-9
12
E 70 145 215 290 – –
422-10
16
E
35
110
250
325
–
–
5
2
3
22-12
8
16
D 80 110 250 280 – –
♦19 22-14
16
A 80 – – 280 – –
6
5
1
22-15
12
16
A (A, B, C, E, F)
E (D)
80
110
250
280
–
–
9
3
22-16
12
16
A 80 110 250 280
–
–
–
14 22-19
16
A 80 110 250 280 – –
9
3
6
22-20
16
A 35 110 250 325 – –
3
2
1
22-21
16
0
A 80 110 250 280
–
–
–
422-22
8
A – 110 250 – – –
822-23
12
D (H)
A (all
others)
35
–
250
–
–
–
9
1
8
22-27
8
16
A (A to H)
80
–
250
280
–
–
722-28
12
A
80
–
–
280
–
–
724-2
12
D 80 – – 280 – –
♦Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
14 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
4
1
3
24-4
0
16
D
80
110
250
280
–
–
16 24-5
16
A
80
110
250
280
–
–
16
2
14
24-7
12
16
A
80
110
250
280
–
–
224-9
4
A 35 110 250 325 – –
724-10
8
A 80 – – 280 – –
9
3
6
24-11
8
12
A
35
110
250
325
–
–
5
2
3
24-12
4
12
A
80
110
250
280
–
–
12 24-19
16
A ––––––
11
2
9
24-20
12
16
D
80
110
250
280
–
–
424-22
8
D 45 110 250 – –
724-27
16
E
80
–
–
280
–
–
24 24-28
16
Instr. 80 110 250 280 – –
12 24A24
12
A –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
4
9
12
260
80
280
100
28 24A28
16
Instr.
65
146
235
–
–
–
19
13
5
1
24A51
16
12
8
A – – – – 14 30
15www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
14
12
2
28-2
16
12
D
35
110
250
325
–
–
5
2
2
1
28-5
4
16
12
D
35
110
250
325
–
–
12
6
6
28-9
16
12
D
80
110
250
280
–
–
7
2
2
3
28-10
4
8
12
A (= A, B, C,
D, E, F)
D (= G)
80
110
250
280
–
–
22
4
18
28-11
12
16
A
80
110
250
280
–
–
26
28-12
16
A
90
180
270
–
–
–
35 28-15
16
A 80 110 250 280 – –
20 28-16
16
A (A-L)
D (M, N, P)
80
110
250
280
–
–
14
10
4
28-20
12
16
A
80
110
250
280
–
–
37 28-21
16
A
80
110
250
280
–
–
6
3
3
28-22
4
16
D
70
145
215
290
–
–
16 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of Contacts Contact
arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
12 28-51
12
D
80
135
195
–
–
–
9
4
5
28A16
4
16
A (e)
Instr.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
3
8
9
260
110
250
280
43 28A51
16
A –
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
3
4
8
9
12
110
80
250
280
100
28
9
19
28A63
12
16
A
–
100
260
–
–
–
5
2
3
32-1
0
12
E (A)
D (all others)
80
110
250
280
–
–
232-5
0
D
35
110
250
325
–
–
23
2
3
2
16
32-6
4
8
12
16
A
80
110
250
280
–
–
35
7
28
32-7
12
16
Instr.
(A, B, U, I.)
A (all others)
80
125
235
280
–
–
30
6
24
32-8
12
16
A
80
125
235
280
–
–
14
12
2
32-9
16
4
D
80
110
250
280
–
–
17www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating
face of Pin Insulator
No. of
Contacts
Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
23
5
18
32-13
12
16
D
80
110
250
280
–
–
8
2
6
32-15
0
12
D
35
110
250 325
–
–
432-17
4
D 45 110 250 – – –
54 32A10
16
A
–
80
–
–
–
–
110
–
–
–
–
250
–
–
–
–
280
–
–
–
3
4
8
9
12
110
80
250
280
100
47
32A47
16
–
A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
3
4
8
9
12
260
110
80
250
280
100
55 32A55
16
A
80
110
250
280
–
–
61
20
41
32A69
16
20
Instr. – 110 250 – – –
No solder pot contacts available for #10/20 contacts.
6
3
3
36-3
0
12
D
70
145
215
290
–
–
436-5
0
A – 120 240 – – –
18 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
View on Mating face
of Pin Insulator
No. of Contacts Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
6
4
2
36-6
4
0
A
35
110
250
25
–
–
47
7
40
36-7
12
16
A
80
110
250
280
–
–
47
1
46
36-8
12
16
A
80
110
250
280
–
–
31
14
14
2
1
36-9
16
12
8
4
A
80
125
235
280
–
–
48 36-10
16
A 80 125 235 280 – –
16
5
5
6
36-14
8
12
16
D
–
–
–
–
–
–
35 36-15
16
D (m)
A (all
others)
60
125
245
305
–
–
52 36A34
16
A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
3
4
8
9
12
20
260
110
80
250
280
100
220
19www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
View on Mating face
of Pin Insulator
No. of Contacts Contact arrangement
Contact size
Service rating Insulator position
W X Y Z
Position Special
polarization
8
4
4
36A35
16
0
A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
3
8
9
260
110
250
280
27 36A46
12
A
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2
3
4
8
9
12
260
110
80
250
280
100
39
8
31
36A98
8
16
A
–
110
–
–
–
–
♦65
15
50
36A99
16
20*
Instr.
30
135
– –
–
–
No solder pot contacts available for #10/20 contacts.
♦ Attention: For all insert rotations, it is possible for miss-mating to occur. It is the responsibility of the customer to ensure they have selected correctly.
*Reduced contact termination 0,3 mm2.
ALTERNATE INSERT POSITION
Indicates location of centerline of key or
keyway of shells in fixed normal position.
Insert is rotated as shown by arrow and
letters.
Tolerances:
Pin insulator 10SL-20: ± 2,0°
Pin insulator 22-36: ± 1,5°
Normal Position: 0°
Socket mating facePin mating face
CONTACT ARRANGEMENTS
20 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CONTACT ARRANGEMENTS
Contact arrangement No. of
Contacts
Contact size
0 4 8 12 16 20
500 160 100 25 15 10
60
12S4 1 1
14S4 1 1
16-12 1 1
18-6 1 1
18-7 1 1
20-2 1 1
22-7 1 1
10SL4 2 2
14S9 2 2
16S4 2 2
16-11 2 2
16A11 2 2
18-3 2 2
20-23 2 2
22-1 2 2
22-8 2 2
24-9 2 2
32-5 2 2
10SL3 3 3
14S1 3 3
14S7 3 3
16S5 3 3
16-7 3 1 2
16-10 3 3
18-5 3 2 1
18-21 3 3
18-22 3 3
20-3 3 3
20-6 3 3
20-19 3 3
22-2 3 3
22-9 3 3
22-21 3 1 2
12SA10 4 4
14S2 4 4
16-9 4 2 2
18-4 4 4
18-10 4 4
18-13 4 1 3
20-4 4 4
20-24 4 2 2
22-4 4 2 2
22-10 4 4
22-22 4 4
24-4 4 1 3
24-22 4 4
32-17 4 4
36-5 4 4
Contact arrangement No. of
Contacts
Contact size
0 4 8 12 16 20
500 160 100 25 15 10
60
14S5 5 5
16S8 5 5
18-11 5 5
18-20 5 5
20-14 5 2 3
22-12 5 2 3
24-12 5 2 3
28-5 5 2 1 2
32-1 5 2 3
14S6 6 6
18-12 6 6
20-8 6 2 4
20-17 6 5 1
20-22 6 3 3
22-5 6 2 4
22-15 6 5 1
28-22 6 3 3
36-3 6 3 3
36-6 6 2 4
14SA7 7 7
16S1 7 7
18-9 7 2 5
18-17 7 2 5
20-15 7 7
22-28 7 7
24-2 7 7
24-10 7 7
24-27 7 7
28-10 7 2 2 3
18-8 8 1 7
20-7 8 8
22-23 8 8
32-15 8 2 6
36A35 8 4 4
24-6 8 8
20-16 9 2 7
20-18 9 3 6
20A9 9 9
22-16 9 3 6
22-20 9 9
22-27 9 1 8
24-11 9 3 6
28A16 9 4 5
18-1 10 10
18-19 10 10
21www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Contact arrangement No. of
Contacts
Contact size
0 4 8 12 16 20
500 160 100 25 15 10
60
20-33 11 11
24-20 11 2 9
24-19 12 12
24A24 12 12
28-9 12 6 6
28-51 12 12
20-11 13 13
20-27 14 14
22-19 14 14
28-2 14 2 12
28-20 14 10 4
32-9 14 2 12
24-5 16 16
24-7 16 2 14
36-14 16 5 5 6
20-29 17 17
20A48 19 19
22-14 19 19
28-16 20 20
28-11 22 4 18
32-6 23 2 3 2 16
32-13 23 5 18
24-28 24 24
20A24 24 24
28-12 26 26
36A46 27 27
24A28 28 28
28A63 28 9 19
32-8 30 6 24
36-9 31 1 2 14 14
28-15 35 35
32-7 35 7 28
36-15 35 35
28-21 37 37
36A98 39 8 31
28A51 43 43
Contact arrangement No. of
Contacts
Contact size
0 4 8 12 16 20
500 160 100 25 15 10
60
28A51 43 43
32A47 47 47
36-7 47 7 40
36-8 47 1 46
36-10 48 48
36A34 52 52
32A10 54 54
32A55 55 55
32A69 61 20 41
36A99 65 15 50
22 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
MOUNTING HOLES
HARNESSING
WIRING HINTS
WIRE STRIPPING
Shell size CA Threaded
Mounting holes for connectors styles,
complete receptacle range
d1 H12 d1 H12 d2 H13 e
CA3100… , CA20… CA3102…,CA02…
10SL 16,0 16,4 3,4 18,2
12S 19,1 16,4 3,4 20,6
14S 22,3 19,7 3,4 23,0
16S /16 25,5 22,9 3,4 24,6
18 28,7 26,1 3,4 27,0
20 31,8 29,5 3,4 29,4
22 35,0 32,7 3,4 31,8
24 38,2 36,0 3,9 34,9
28 44,5 42,0 3,9 39,7
32 50,9 48,3 4,5 44,5
36 57,2 53,1 4,5 49,2
CA Threaded connectors are designed for single wire
harnessing, if an individual wire sealing grommet is used.
Wires have to conform to wire and insulation diameters
with the data given in the following table:
Either mechanical or hot stripping can be used. Prevent conduc-
tors or insulators damage. For solder contacts, conductors have
to be pretinned.
Note: Do not twist conductors used with crimp contacts. Do not touch
uninsulated conductors before crimping, twisting of conductors and grease
or lubricants on the wires cause poor crimp quality.
Contact size Crimp / solder contacts Insulation Ø
AWG metric
mm AWG metric
mm² AWG metric
mm
– 10 – 0,75-1,0 – 1,45-2,5
16S /15S 16/15 16 0,75-1,5 1,6-2,8 1,60-2,8
12 25 12 2,5 2,9-3,5 2,9-3,5
– 60 – 6,0 – 3,5-4,9
8 100 8 10,0 4,2-5,8 5,5-6,5
4 160 4 16,0 6,2-9,0 7,1-9,0
0 500 0 50,0 10,5-13,0 10,5-13,0
Contact size Stripping length
AWG metric mm
– 10 4,0 + 0,4
16S/15S 16/15 6,0 + 0,5
12 25 6,0 + 0,5
8 60/100 11,0 + 0,8 – 0,4
4 160 11,0 + 0,8 – 0,4
0500 13,0 + 0,8 – 0,4
Strip wires carefully. Do not damage conductors and insulation. For solder connections, wires have to be pretinned.
Do not twist conductors used in crimp contacts, otherwise no perfect crimp connection will be achieved. Do not touch
conductors before crimping. Film of grease or lubricants on the strands will cause poor crimp quality.
For detailed assembly instructions please visit www.ittcannon.com and search for the keyword "CA Bayonet Assembly Instruction".
23www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
SEPARATING AND COUPLING DIMENSIONS
Shell size l1 l2 l3 l4 l5 l6 l7 l8
min. min. min. min. min. min. max. max.
10SL 70 70 65 80 70 65 3,5 8,0
12S 70 75 65 80 75 70 3,5 8,0
14S 70 75 65 80 75 80 3,5 8,0
16S 70 90 65 80 80 80 3,5 8,0
16 80 100 70 100 90 100 3,5 8,0
18 90 100 70 110 95 110 3,5 8,0
20 90 100 70 110 95 110 3,5 8,0
22 90 100 70 110 95 110 3,5 8,0
24 110 120 90 120 105 120 5,0 8,0
28 110 120 90 120 105 120 5,0 9,0
32 110 180 90 120 115 120 6,0 9,0
36 110 190 100 130 120 130 6,0 9,0
PLUG
CA3106E
CA3106E-DN
RECEPTACLE
CA3102E
PLUG
CA3106F
CA06PG/ME
RECEPTACLE
CA3102E
PLUG
CA3108E
CA3106E-DN
RECEPTACLE
CA3102E
CA20L
CA20E
24 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
WALL MOUNTING RECEPTACLE CLASS F, E
CA3100E
CA3100E designates a wall mounting receptacle. It mates with plugs CA3106 and CA3108. If crimp version is required please order CA3100E…F80 or CA3100E…F183.
Part No. CA
(pin insert*)
A l1 l2 l3 l4 l5 d1¹ d2 e
Thread max. ±0,3 max. +0,2/– 0,1 max. +0,2 ±0,3
CA3100E10SL-**P*** 5/8-24UNEF-2A 53 14,2 2,8 25,4 120 6,5 3,1 18,2
CA3100E12S-**P*** 3/4-20UNEF-2A 53 14,2 3,2 28,0 120 6,5 3,1 20,6
CA3100E14S-**P*** 7/8-20UNEF-2A 55 14,2 3,2 30,0 120 9,0 3,1 23,0
CA3100E16S-**P*** 1-20UNEF-2A 56 14,2 3,2 32,5 125 11,0 3,1 24,6
CA3100E16-**P*** 1-20UNEF-2A 66 19,0 3,2 32,5 125 11,0 3,1 24,6
CA3100E18-**P*** 1-1/8-18UNEF-2A 68 19,0 4,0 35,0 125 14,2 3,1 27,0
CA3100E20-**P*** 1-1/4-18UNEF-2A 68 19,0 4,0 38,0 125 15,8 3,1 29,4
CA3100E22-**P*** 1-3/8-18UNEF-2A 68 19,0 4,0 41,0 125 15,8 3,1 31,8
CA3100E24-**P*** 1-1/2-18UNEF-2A 76 20,6 4,0 44,5 125 21,4 3,7 34,9
CA3100E28-**P*** 1-3/4-18UNS-2A 76 20,6 4,0 50,8 125 21,4 3,7 39,7
CA3100E32-**P*** 2-18UNS-2A 76 22,2 4,0 57,0 125 26,7 4,4 44,5
CA3100E36-**P*** 2-1/4-16UN-2A 76 22,2 4,0 63,5 135 31,7 4,4 49,2
¹ max. cable dia
CA3100R
CA3100R designates a receptacle with a shorter and lightweight backshell. It mates with plugs CA3106 and CA3108. If crimp version is required please order CA3100R…F80 or
CA3100R…F183.
Part No. CA (pin insert*) A l1 l2 l3 l4 d1¹ d2 e
Thread max. ±0,3 max. ±0,2 ±0,2 ±0,3
CA3100R10SL-**P*** 5/8-24UNEF-2A 53 14,2 2,8 25,4 9,6 3,1 18,2
CA3100R12S-**P*** 3/4-20UNEF-2A 53 14,2 3,2 28,0 10,3 3,1 20,6
CA3100R14S-**P*** 7/8-20UNEF-2A 55 14,2 3,2 30,0 12,4 3,1 23,0
CA3100R16S-**P*** 1-20UNEF-2A 56 14,2 3,2 32,5 15,4 3,1 24,6
CA3100R16-**P*** 1-20UNEF-2A 66 19,0 3,2 32,5 15,4 3,1 24,6
CA3100R18-**P*** 1-1/8-18UNEF-2A 68 19,0 4,0 35,0 18,4 3,1 27,0
CA3100R20-**P*** 1-1/4-18UNEF-2A 68 19,0 4,0 38,0 22,0 3,1 29,4
CA3100R22-**P*** 1-3/8-18UNEF-2A 68 19,0 4,0 41,0 24,7 3,1 31,8
CA3100R24-**P*** 1-1/2-18UNEF-2A 76 20,6 4,0 44,5 27,6 3,7 34,9
CA3100R28-**P*** 1-3/4-18UNS-2A 76 20,6 4,0 50,8 31,6 3,7 39,7
CA3100R32-**P*** 2-18UNS-2A 76 22,2 4,0 57,0 38,5 4,4 44,5
CA3100R36-**P*** 2-1/4-16UN-2A 76 22,2 4,0 63,5 44,5 4,4 49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
25www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
WALL MOUNTING RECEPTACLE CLASS F, DN
CA3100F
CA3100F designates a wall mounting receptacle with backshell for flex tubes or to be combined with a cable clamp. It mates with plugs CA3106 and CA3108.
Part No. CA
(pin insert*)
A d2 d3¹ d4 l1 l2 l3 I4 l5 e
Thread +0,2/– 0,1 Thread max. +0,4 ±0,3 ±0,3 min. ±0,1
CA3100F10SL-**P-*** 5/8-24UNEF-2A 3,1 8,2 5/8-24UNEF-2A 45,0 14,2 2,8 25,4 9,5 18,2
CA3100F12S-**P-*** 3/4-20UNEF-2A 3,1 8,2 5/8-20UNEF-2A 45,0 14,2 3,2 28,0 9,5 20,6
CA3100F14S-**P-*** 7/8-20UNEF-2A 3,1 11,1 3/4-20UNEF-2A 45,0 14,2 3,2 30,0 9,5 23,0
CA3100F16S-**P-*** 1-20UNEF-2A 3,1 14,3 7/8-20UNEF-2A 45,0 14,2 3,2 32,5 9,5 24,6
CA3100F16-**P-*** 1-20UNEF-2A 3,1 14,3 7/8-20UNEF-2A 54,0 19,0 3,2 32,5 9,5 24,6
CA3100F18-**P-*** 1-1/8-18UNEF-2A 3,1 16,7 1-20UNEF-2A 54,0 19,0 4,0 35,0 9,5 27,0
CA3100F20-**P-*** 1-1/4-18UNEF-2A 3,1 19,8 1-3/16-18UNEF-2A 55,0 19,0 4,0 38,0 9,5 29,4
CA3100F22-**P-*** 1-3/8-18UNEF-2A 3,1 19,8 1-3/16-18UNEF-2A 58,0 19,0 4,0 41,0 9,5 31,8
CA3100F24-**P-*** 1-1/2-18UNEF-2A 3,7 25,4 1-7/16-18UNEF-2A 59,0 20,6 4,0 44,5 9,5 34,9
CA3100F28-**P-*** 1-3/4-18UNS-2A 3,7 27,0 1-7/16-18UNEF-2A 60,0 20,6 4,0 50,8 9,5 39,7
CA3100F32-**P-*** 2-18UNS-2A 4,4 32,5 1-3/4-18UNS-2A 62,0 22,2 4,0 57,0 11,0 44,5
CA3100F36-**P-*** 2-1/4-16UN-2A 4,4 35,7 2-18UNS-2A 64,0 22,2 4,0 63,5 11,8 49,2
¹ max. cable dia
CA3100E-DN
CA3100E-DN designates a wall mounting receptacle with backshell for heat-shrinkable boots. It mates with plugs CA3106 and CA3108.
Part No. CA (pin
insert*)
A d2 d3 d4¹ d5 l1 l2 l3 I4 l5 e
Thread +0,2/– 0,1 ±0,2 max. max. +0,4 ±0,3 ±0,5 ±0,3 ±0,1
CA3100E10SL-**P-DN 5/8-24UNEF-2A 3,1 15,5 7,7 13,3 49,0 14,2 2,8 11,7 25,4 18,2
CA3100E12S-**P-DN 3/4-20UNEF-2A 3,1 15,5 7,9 13,3 49,0 14,2 3,2 11,7 28,0 20,6
CA3100E14S-**P-DN 7/8-20UNEF-2A 3,1 19,1 10,6 17,0 49,0 14,2 3,2 11,7 30,0 23,0
CA3100E16S-**P-DN 1-20UNEF-2A 3,1 23,9 13,5 21,9 49,0 14,2 3,2 11,7 32,5 24,6
CA3100E16-**P-DN 1-20UNEF-2A 3,1 23,9 13,5 21,9 58,0 19,0 3,2 11,5 32,5 24,6
CA3100E18-**P-DN 1-1/8-18UNEF-2A 3,1 23,9 14,6 21,9 58,0 19,0 4,0 11,5 35,0 27,0
CA3100E20-**P-DN 1-1/4-18UNEF-2A 3,1 29,6 18,7 26,2 60,0 19,0 4,0 12,7 35,0 27,0
CA3100E22-**P-DN 1-3/8-18UNEF-2A 3,1 29,6 20,8 26,2 60,0 19,0 4,0 12,7 41,0 31,8
CA3100E24-**P-DN 1-1/2-18UNEF-2A 3,7 37,8 24,6 34,5 63,0 20,6 4,0 12,7 44,5 34,9
CA3100E28-**P-DN 1-3/4-18UNS-2A 3,7 37,8 27,0 34,5 63,0 20,6 4,0 12,7 50,8 39,7
CA3100E32-**P-DN 2-18UNS-2A 4,4 47,8 33,3 43,6 67,0 22,2 4,0 15,2 57,0 44,5
CA3100E36-**P-DN 2-1/4-16UN-2A 4,4 47,8 38,5 43,6 68,0 22,2 4,0 15,2 63,5 49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
26 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
WALL MOUNTING RECEPTACLE CLASS PG/ME, SHIELDED
CA00PG and CA00ME
CA00PG/ME designates a wall mounting receptacle for usage with PG or metric glands. It mates with plugs CA3106 and CA3108. The cable gland is not content of the delivery.
Part No. CA (pin insert*) A d1 d2 l1 l2 l3 I4 e
Thread +0,2/– 0,1 PG-Thread Metric max. +0,4 ±0,3 ±0,3 ±0,1
CA00PG10SL-*P-*** CA00ME10SL-**P-*** 5/8-24UNEF-2A 3,1 PG9 M16 × 1,5 52,0 14,2 2,8 25,4 18,2
CA00PG12S-**P-*** CA00ME12S-**P-*** 3/4-20UNEF-2A 3,1 PG9 M16 × 1,5 52,0 14,2 3,2 28,0 20,6
CA00PG14S-**P-*** CA00ME14S-**P-*** 7/8-20UNEF-2A 3,1 PG11 M20 × 1,5 52,0 14,2 3,2 30,0 23,0
CA00PG16S-*P-*** CA00ME16S-**P-*** 1-20UNEF-2A 3,1 PG13,5 M20 × 1,5 54,0 14,2 3,2 32,5 24,6
CA00PG16-**P-*** CA00ME16-**P-*** 1-20UNEF-2A 3,1 PG13,5 M20 × 1,5 64,0 19,0 3,2 32,5 24,6
CA00PG18-**P-*** CA00ME18-**P-*** 1-1/8-18UNEF-2A 3,1 PG13,5 M25 × 1,5 69,0 19,0 4,0 35,0 27,0
CA00PG20-**P-*** CA00ME20-**P-*** 1-1/4-18UNEF-2A 3,1 PG16 M25 × 1,5 70,0 19,0 4,0 38,0 29,4
CA00PG22-**P-*** CA00ME22-**P-*** 1-3/8-18UNEF-2A 3,1 PG16 M32 × 1,5 73,0 19,0 4,0 41,0 31,8
CA00PG24-**P-*** CA00ME24-**P-*** 1-1/2-18UNEF-2A 3,7 PG16 M32 × 1,5 74,0 20,6 4,0 44,5 34,9
CA00PG28-**P-*** CA00ME28-**P-*** 1-3/4-18UNS-2A 3,7 PG21 M32 × 1,5 74,0 20,6 4,0 50,8 39,7
CA00PG32-**P-*** CA00ME32-**P-*** 2-18UNS-2A 4,4 PG29 M40 × 1,5 76,0 22,2 4,0 57,0 44,5
CA00PG36-**P-*** CA00ME36-**P-*** 2-1/4-16UN-2A 4,4 PG29 M40 × 1,5 87,0 22,2 4,0 63,5 49,2
CA3100E…-13/-14/-15
CA3100E…-13/-14/-15 designates a shielded wall mounting receptacle with backshell to accommodate cable braids and heat-shrinkable boots.
For Mod. codes please see page 8. It mates with plugs CA3106…-13/-14/-15.
Part No. CA
(pin insert*)
A d1¹ d2 d3 d4 l1 l2 l3 I4 e
Thread +0,2/– 0,1 ±0,5 max. max. +0,4 ±0,3 ±0,5 ±0,1
CA3100E10SL-**P-*** 5/8-24UNEF-2A 7,7 3,1 18,5 16,3 55,0 14,2 2,8 25,4 18,2
CA3100E12S-**P-*** 3/4-20UNEF-2A 7,9 3,1 20,0 17,0 55,0 14,2 3,2 28,0 20,6
CA3100E14S-**P-*** 7/8-20UNEF-2A 10,6 3,1 22,0 20,0 58,0 14,2 3,2 30,0 23,0
CA3100E16S-**P-*** 1-20UNEF-2A 13,5 3,1 25,0 23,0 70,0 14,2 3,2 32,5 24,6
CA3100E16-**P-*** 1-20UNEF-2A 13,5 3,1 25,0 23,0 70,0 19,0 3,2 32,5 24,6
CA3100E18-**P-*** 1-1/8-18UNEF-2A 14,6 3,1 28,0 24,5 70,0 19,0 4,0 35,0 27,0
CA3100E20-**P-*** 1-1/4-18UNEF-2A 18,5 3,1 32,0 28,5 70,0 19,0 4,0 38,0 27,0
CA3100E22-**P-*** 1-3/8-18UNEF-2A 20,8 3,1 34,0 30,5 70,0 19,0 4,0 41,0 31,8
CA3100E24-**P-*** 1-1/2-18UNEF-2A 24,6 3,7 38,0 34,5 70,0 20,6 4,0 44,5 34,9
CA3100E28-**P-*** 1-3/4-18UNS-2A 27,0 3,7 41,0 37,5 70,0 20,6 4,0 50,8 39,7
CA3100E32-**P-*** 2-18UNS-2A 33,3 4,4 48,0 44,0 75,0 22,2 4,0 57,0 44,5
CA3100E36-**P-*** 2-1/4-16UN-2A 38,5 4,4 55,0 51,0 85,0 22,2 4,0 63,5 49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
27www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CABLE CONNECTING PLUG CLASS F, E, R
CA3101E
CA3101E designates a cable connecting plug (without flange and coupling nut). It mates with plugs CA3106 and CA3108.
Part No. CA (pin insert*) A d1 d2¹ l1 l2 l3 I4 I5
Thread max. max. +0,4 ±0,3 max. max.
CA3101E10SL-**P*** 5/8-24UNEF-2A 21,8 6,5 53,0 14,2 2,8 16,2 120
CA3101E12S-**P*** 3/4-20UNEF-2A 25,0 6,5 53,0 14,2 3,2 19,4 120
CA3101E14S-**P*** 7/8-20UNEF-2A 28,2 9,0 55,0 14,2 3,2 22,5 120
CA3101E16S-**P*** 1-20UNEF-2A 31,4 11,0 56,0 14,2 3,2 25,7 120
CA3101E16-**P*** 1-20UNEF-2A 31,4 11,0 66,0 19,0 3,2 25,7 125
CA3101E18-**P*** 1-1/8-18UNEF-2A 34,5 14,2 68,0 19,0 4,0 28,9 125
CA3101E20-**P*** 1-1/4-18UNEF-2A 37,3 15,8 68,0 19,0 4,0 32,1 125
CA3101E22-**P*** 1-3/8-18UNEF-2A 40,9 15,8 68,0 19,0 4,0 35,2 125
CA3101E24-**P*** 1-1/2-18UNEF-2A 43,8 21,4 76,0 20,6 4,0 38,4 125
CA3101E28-**P*** 1-3/4-18UNS-2A 50,4 21,4 76,0 20,6 4,0 44,8 125
CA3101E32-**P*** 2-18UNS-2A 56,8 26,7 76,0 22,2 4,0 51,1 125
CA3101E36-**P*** 2-1/4-16UN-2A 63,1 31,7 76,0 22,2 4,0 57,5 135
¹ max. cable dia
CA3101R
CA3101R designates a cable connecting plug (without flange and coupling nut) with a shorter and lightweight backshell. It mates with plugs CA3106 and CA3108. Utilized to
realize a cable to cable connection. If crimp version is required please order CA3101R…F80 or CA3101R…F183
Part No. CA (pin insert*) A d1¹ l1 l2 l3 I4
Thread max. + 0,4 ± 0,3 ± 0,2
CA3101R10SL-**P*** 5/8-24UNEF-2A 9,6 53,0 14,2 2,8 16,2
CA3101R12S-**P*** 3/4-20UNEF-2A 10,3 53,0 14,2 3,2 19,4
CA3101R14S-**P*** 7/8-20UNEF-2A 12,4 55,0 14,2 3,2 22,5
CA3101R16S-**P*** 1-20UNEF-2A 15,4 56,0 14,2 3,2 25,7
CA3101R16-**P*** 1-20UNEF-2A 15,4 66,0 19,0 3,2 25,7
CA3101R18-**P*** 1-1/8-18UNEF-2A 18,4 68,0 19,0 4,0 28,9
CA3101R20-**P*** 1-1/4-18UNEF-2A 22,0 68,0 19,0 4,0 32,1
CA3101R22-**P*** 1-3/8-18UNEF-2A 24,7 68,0 19,0 4,0 35,2
CA3101R24-**P*** 1-1/2-18UNEF-2A 27,6 76,0 20,6 4,0 38,4
CA3101R28-**P*** 1-3/4-18UNS-2A 31,6 76,0 20,6 4,0 44,8
CA3101R32-**P*** 2-18UNS-2A 38,5 76,0 22,2 4,0 51,1
CA3101R36-**P*** 2-1/4-16UN-2A 44,5 76,0 22,2 4,0 57,5
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
28 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CABLE CONNECTING PLUG CLASS F, DN
CA3101F
CA3101F designates a cable connecting plug (without flange and coupling nut) with backshell for flex tubes or to be combined with a cable clamp. It mates with plugs
CA3106 and CA3108. Utilized to realize a cable to cable connection. If crimp version is required please order CA3101F…F80 or CA3101F…F183
Part No. CA (pin insert*) A d1 d2¹ d3 L1 L2 L3 L4 L5
Thread max. Thread max. +0,4 ±0,3 min. ±0,2
CA3101F10SL-**P-*** 5/8-24UNEF-2A 21,8 8,2 5/8-24UNEF-2A 45,0 14,2 2,8 9,5 16,2
CA3101F12S-**P-*** 3/4-20UNEF-2A 25,0 8,2 5/8-20UNEF-2A 45,0 14,2 3,2 9,5 19,4
CA3101F14S-**P-*** 7/8-20UNEF-2A 28,2 11,1 3/4-20UNEF-2A 45,0 14,2 3,2 9,5 22,5
CA3101F16S-**P-*** 1-20UNEF-2A 31,4 14,3 7/8-20UNEF-2A 45,0 14,2 3,2 9,5 25,7
CA3101F16-**P-*** 1-20UNEF-2A 31,4 14,3 7/8-20UNEF-2A 54,0 14,2 3,2 9,5 25,7
CA3101F18-**P-*** 1-1/8-18UNEF-2A 34,5 16,7 1-20UNEF-2A 54,0 19,0 4,0 9,5 28,9
CA3101F20-**P-*** 1-1/4-18UNEF-2A 37,3 19,8 1-3/16-18UNEF-2A 55,0 19,0 4,0 9,5 32,1
CA3101F22-**P-*** 1-3/8-18UNEF-2A 40,9 19,8 1-3/16-18UNEF-2A 58,0 20,6 4,0 9,5 35,2
CA3101F24-**P-*** 1-1/2-18UNEF-2A 43,8 25,4 1-7/16-18UNEF-2A 59,0 20,6 4,0 9,5 38,4
CA3101F28-**P-*** 1-3/4-18UNS-2A 50,4 27,0 1-7/16-18UNEF-2A 60,0 20,6 4,0 9,5 44,8
CA3101F32-**P-*** 2-18UNS-2A 56,8 32,5 1-3/4-18UNS-2A 62,0 22,2 4,0 11,0 51,1
CA3101F36-**P-*** 2-1/4-16UN-2A 63,1 35,7 2-18UNS-2A 64,0 22,2 4,0 11,8 57,5
¹ max. cable dia
CA3101E-DN
CA3101E-DN designates a cable connecting plug (without flange and coupling nut) with backshell for heat-shrinkable boots. It mates with plugs CA3106 and
CA3108. Utilized to realize a cable to cable connection. If crimp version is required please order CA3101E-DN-F80 or CA3101E-DN-F183
Part No. CA (pin insert*) A d1 d2¹ d3 d4 l1 l2 l3 l4 l5
Thread max. ±0,5 ±0,2 max. ±0,3 ±0,3 max. ±0,2
CA3101E10SL-**P-DN 5/8-24UNEF-2A 21,8 7,7 15,5 7,7 49,0 14,2 2,8 11,7 16,2
CA3101E12S-**P-DN 3/4-20UNEF-2A 25,0 7,9 15,5 7,9 49,0 14,2 3,2 11,7 19,4
CA3101E14S-**P-DN 7/8-20UNEF-2A 28,2 10,6 19,1 10,6 49,0 14,2 3,2 11,7 22,5
CA3101E16S-**P-DN 1-20UNEF-2A 31,4 13,5 23,9 13,5 49,0 14,1 3,2 11,7 25,7
CA3101E16-**P-DN 1-20UNEF-2A 31,4 13,5 23,9 13,5 58,0 19,0 3,2 11,5 25,7
CA3101E18-**P-DN 1-1/8-18UNEF-2A 34,5 14,6 23,9 14,6 58,0 19,0 4,0 11,5 28,9
CA3101E20-**P-DN 1-1/4-18UNEF-2A 37,3 18,7 29,6 18,7 60,0 19,0 4,0 12,7 32,1
CA3101E22-**P-DN 1-3/8-18UNEF-2A 40,9 20,8 29,6 20,8 60,0 19,0 4,0 12,7 35,2
CA3101E24-**P-DN 1-1/2-18UNEF-2A 43,8 24,6 37,8 24,6 63,0 20,6 4,0 12,7 38,4
CA3101E28-**P-DN 1-3/4-18UNS-2A 50,4 27,0 37,8 27,0 63,0 20,6 4,0 12,7 44,8
CA3101E32-**P-DN 2-18UNS-2A 56,8 33,3 47,8 33,3 67,0 22,2 4,0 15,2 51,1
CA3101E36-**P-DN 2-1/4-16UN-2A 63,1 38,5 47,8 38,5 68,0 22,2 4,0 15,2 57,5
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
29www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CABLE CONNECTING PLUG PG/ME, SHIELDED
CA01PG and CA01ME
CA01PG/ME designates a cable connecting plug (without flange and coupling nut) for usage with PG or metric glands.
It mates with plugs CA3106 and CA3108. The cable gland is not content of the delivery.
Part No. CA (pin insert*) A d1 d2 d4 l2 l3 I4
Thread max. PG-Thread Metric max. +0,4 ±0,3 max.
CA01PG10SL-**P-*** CA01ME10SL-**P-*** 5/8-24UNEF-2A 16,2 PG9 M16 × 1,5 52,0 14,2 2,8 21,8
CA01PG12S-**P-*** CA01ME12S-**P-*** 3/4-20UNEF-2A 19,4 PG9 M16 × 1,5 52,0 14,2 3,2 25,0
CA01PG14S-**P-*** CA01ME14S-**P-*** 7/8-20UNEF-2A 22,5 PG11 M20 × 1,5 52,0 14,2 3,2 28,2
CA01PG16S-**P-*** CA01ME16S-**P-*** 1-20UNEF-2A 25,7 PG13,5 M20 × 1,5 54,0 14,2 3,2 31,4
CA01PG16-**P-*** CA01ME16-**P-*** 1-20UNEF-2A 25,7 PG13,5 M20 × 1,5 64,0 19,0 3,2 31,4
CA01PG18-**P-*** CA01ME18-**P-*** 1-1/8-18UNEF-2A 28,9 PG13,5 M25 × 1,5 69,0 19,0 4,0 34,5
CA01PG20-**P-*** CA01ME20-**P-*** 1-1/4-18UNEF-2A 32,1 PG16 M25 × 1,5 70,0 19,0 4,0 37,3
CA01PG22-**P-*** CA01ME22-**P-*** 1-3/8-18UNEF-2A 35,2 PG16 M32 × 1,5 73,0 19,0 4,0 40,9
CA01PG24-**P-*** CA01ME24-**P-*** 1-1/2-18UNEF-2A 38,4 PG16 M32 × 1,5 74,0 20,6 4,0 43,8
CA01PG28-**P-*** CA01ME28-**P-*** 1-3/4-18UNS-2A 44,8 PG21 M32 × 1,5 74,0 20,6 4,0 50,4
CA01PG32-**P-*** CA01ME32-**P-*** 2-18UNS-2A 51,1 PG29 M40 × 1,5 76,0 22,2 4,0 56,8
CA01PG36-**P-*** CA01ME36-**P-*** 2-1/4-16UN-2A 57,5 PG29 M40 × 1,5 87,0 22,2 4,0 63,1
CA3101E…-13/-14/-15
CA3101E…-13/-14/-15 designates a shielded cable connecting plug (without flange and coupling nut) to accommodate cable braids and heat-shrinkable boots.
For Mod. codes please see page 8. It mates with plugs CA3106…-13/-14/-15. Utilized to realize a cable to cable connection.
Part No. CA
(pin insert*)
A d1¹ d2 d3 l1 l2 l3 l4
Thread ±0,5 max. max. ±0,3 ±0,3 max.
CA3101E10SL-**P-*** 5/8-24UNEF-2A 7,7 18,5 16,3 55,0 14,2 2,8 16,2
CA3101E12S-**P-*** 3/4-20UNEF-2A 7,9 20,0 17,0 55,0 14,2 3,2 19,4
CA3101E14S-**P-*** 7/8-20UNEF-2A 10,6 22,0 20,0 58,0 14,2 3,2 22,5
CA3101E16S-**P-*** 1-20UNEF-2A 13,5 25,0 23,0 70,0 14,1 3,2 25,7
CA3101E16-**P-*** 1-20UNEF-2A 13,5 25,0 23,0 70,0 19,0 3,2 25,7
CA3101E18-**P-*** 1-1/8-18UNEF-2A 14,6 28,0 24,5 70,0 19,0 4,0 28,9
CA3101E20-**P-*** 1-1/4-18UNEF-2A 14,6 32,0 28,5 70,0 19,0 4,0 32,1
CA3101E22-**P-*** 1-3/8-18UNEF-2A 20,8 34,0 30,5 70,0 19,0 4,0 35,2
CA3101E24-**P-*** 1-1/2-18UNEF-2A 24,6 38,0 34,5 70,0 20,6 4,0 38,4
CA3101E28-**P-*** 1-3/4-18UNS-2A 27,0 41,0 37,5 70,0 20,6 4,0 44,8
CA3101E32-**P-*** 2-18UNS-2A 33,3 48,0 44,0 75,0 22,2 4,0 51,1
CA3101E36-**P-*** 2-1/4-16UN-2A 38,5 55,0 51,0 85,0 22,2 4,0 57,5
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
30 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
BOX MOUNTING RECEPTACLE
CA3102
CA3102E designates a box mounting receptacle for front panel mounting with square flange. It mates with plugs CA3106 and CA3108.
If crimp version is required please order CA3102E…F80 or CA3102E…F183.
Part No. CA
(pin insert*)
A l1 l2 l3 l4 d1 d2 e
Thread max. +0,4 ±0,7 ±0,3 max. +0,2/– 0,1 ±0,1
CA3102E10SL-**P*** 5/8-24UNEF-2A 25,1 14,2 3,0 25,4 15,9 3,1 18,2
CA3102E12S-**P*** 3/4-20UNEF-2A 25,1 14,2 3,0 28,0 15,9 3,1 20,6
CA3102E14S-**P*** 7/8-20UNEF-2A 25,1 14,2 3,0 30,0 19,0 3,1 23,0
CA3102E16S-**P*** 1-20UNEF-2A 25,1 14,2 3,0 32,5 22,2 3,1 24,6
CA3102E16-**P*** 1-20UNEF-2A 34,6 19,0 3,0 32,5 22,2 3,1 24,6
CA3102E18-**P*** 1-1/8-18UNEF-2A 34,6 19,0 3,9 35,0 25,4 3,1 27,0
CA3102E20-**P*** 1-1/4-18UNEF-2A 34,6 19,0 3,9 38,0 29,0 3,1 29,4
CA3102E22-**P*** 1-3/8-18UNEF-2A 34,6 19,0 3,9 41,0 32,2 3,1 31,8
CA3102E24-**P*** 1-1/2-18UNEF-2A 36,2 20,6 3,9 44,5 35,3 3,7 34,9
CA3102E28-**P*** 1-3/4-18UNS-2A 36,2 20,6 3,9 50,8 41,2 3,7 39,7
CA3102E32-**P*** 2-18UNS-2A 37,8 22,2 3,9 57,0 47,6 4,4 44,5
CA3102E36-**P*** 2-1/4-16UN-2A 37,8 22,2 3,9 63,5 52,4 4,4 49,2
Note: Older versions also used the designation CA3102R instead of the CA3102E. These parts would be identical but the designation is no longer valid.
CA20E
CA20E designates a box mounting receptacle for rear panel mounting. It mates with plugs CA3106 and CA3108.
Part No. CA
(pin insert*)
A d1 d2 l1 l2 l3 L4 e
Thread max. H13 Code: BM29 max. +0,4 ±0,3 ±0,3 ±0,1
CA20E10SL-**-P-*** 5/8-24UNEF-2A 14,5 3,2 M4 25,1 18,2 2,8 25.4 18,2
CA20E12S-**-P-*** 3/4-20UNEF-2A 16,1 3,2 M4 25,1 18,2 3,2 28.0 20,6
CA20E14S-**-P-*** 7/8-20UNEF-2A 19,2 3,2 M4 25,1 18,2 3,2 30.0 23,0
CA20E16S-**-P-*** 1-20UNEF-2A 22,4 3,2 M4 25,1 18,2 3,2 32.5 24,6
CA20E16-**-P-*** 1-20UNEF-2A 22,4 3,2 M4 34,2 21,5 3,2 32.5 24,6
CA20E18-**-P-*** 1-1/8-18UNEF-2A 25,6 3,2 M4 34,2 23,05 4,0 35.0 27,0
CA20E20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,2 M4 34,2 23,05 4,0 38.0 29,4
CA20E22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,2 M4 34,2 23,05 4,0 41.0 31,8
CA20E24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 M5 34,2 24,05 4,0 44.5 34,9
CA20E28-**-P-*** 1-3/4-18UNS-2A 41,4 3,7 M5 34,2 24,05 4,0 50.8 39,7
CA20E32-**-P-*** 2-18UNS-2A 47,8 4,4 M6 34,2 24,05 4,0 57.0 44,5
CA20E36-**-P-*** 2-1/4-16UN-2A 54,1 4,4 M6 34,2 24,05 4,0 63.5 49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8
CANNON CA THREADED
Dimension X max for pin or socket (solder contacts only)
Shell size Contact size
16 12 8 4 0
10SL 13,6 – – – –
12S,14S,16S 13,2 – – – –
12 17,9 17,9 – – –
14 17,9 17,9 19,5 – –
16 17,9 17,9 19,5 19,5 –
18 17,1 17,1 18,7 18,7 –
20, 22 17,1 17,1 18,7 18,7 24,7
24, 28 15,5 15,5 17,1 17,1 23,1
32, 36 13,9 13,9 15,5 15,5 21,5
31www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
BOX MOUNTING RECEPTACLE PCB VERSION
CA02L
CA02L designates a box mounting receptacle for front panel mounting with PCB termination. It mates with plugs CA3106 and CA3108. Available for contact arrangements
with #16 contacts only. For #12 contacts consult factory.
Part No. CA (pin insert*) A d1 d2 l1 l2 l3 l4 e
Thread max. +0,2/– 0,1 max. +0,4 0,3 0,3 0,1
CA02L10SL-**-P-*** 5/8-24UNEF-2A 15,9 3,1 25,1 14,2 2,8 25,4 18,2
CA02L12S-**-P-*** 3/4-20UNEF-2A 15,9 3,1 25,1 14,2 3,2 28,0 20,6
CA02L14S-**-P-*** 7/8-20UNEF-2A 19,0 3,1 25,1 14,2 3,2 30,0 23,0
CA02L16S-**-P-*** 1-20UNEF-2A 22,2 3,1 25,1 14,2 3,2 32,5 24,6
CA02L16-**-P-*** 1-20UNEF-2A 22,2 3,1 34,2 19,0 3,2 32,5 24,6
CA02L18-**-P-*** 1-1/8-18UNEF-2A 25,4 3,1 34,2 19,0 4,0 35,0 27,0
CA02L20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,1 34,2 19,0 4,0 38,0 29,4
CA02L22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,1 34,2 19,0 4,0 41,0 31,8
CA02L24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 34,2 20,6 4,0 44,5 34,9
CA02L28-**-P-*** 1-3/4-18UNS-2A 41,2 3,7 34,2 20,6 4,0 50,8 39,7
CA02L32-**-P-*** 2-18UNS-2A 47,6 4,4 34,2 22,2 4,0 57,0 44,5
CA02L36-**-P-*** 2-1/4-16UN-2A 52,4 4,4 34,2 22,2 4,0 63,5 49,2
CA20L
CA20L designates a box mounting receptacle for rear panel mounting with PCB termination. It mates with plugs CA3106 and CA3108. Available for contact arrangements
with #16 contacts only. For #12 contacts consult factory.
Part No. CA (pin insert*) A d1 d2 l1 l2 l3 l4 e
Thread max. H13 (Std.) Code BM29 max. 0,4 ±0,3 ±0,3 ±0,1
CA20L10SL-**-P-*** 5/8-24UNEF-2A 14,5 3,2 M4 25,1 18,2 2,8 25.4 18,2
CA20L12S-**-P-*** 3/4-20UNEF-2A 16,1 3,2 M4 25,1 18,2 3,2 28.0 20,6
CA20L14S-**-P-*** 7/8-20UNEF-2A 19,2 3,2 M4 25,1 18,2 3,2 30.0 23,0
CA20L16S-**-P-*** 1-20UNEF-2A 22,4 3,2 M4 25,1 18,2 3,2 32.5 24,6
CA20L16-**-P-*** 1-20UNEF-2A 22,4 3,2 M4 34,2 21,5 3,2 32.5 24,6
CA20L18-**-P-*** 1-1/8-18UNEF-2A 25,6 3,2 M4 34,2 23,05 4,0 35.0 27,0
CA20L20-**-P-*** 1-1/4-18UNEF-2A 29,0 3,2 M4 34,2 23,05 4,0 38.0 29,4
CA20L22-**-P-*** 1-3/8-18UNEF-2A 32,2 3,2 M4 34,2 23,05 4,0 41.0 31,8
CA20L24-**-P-*** 1-1/2-18UNEF-2A 35,3 3,7 M5 34,2 24,05 4,0 44.5 34,9
CA20L28-**-P-*** 1-3/4-18UNS-2A 41,4 3,7 M5 34,2 24,05 4,0 50.8 39,7
CA20L32-**-P-*** 2-18UNS-2A 47,8 4,4 M6 34,2 24,05 4,0 57.0 44,5
CA20L36-**-P-*** 2-1/4-16UN-2A 54,1 4,4 M6 34,2 24,05 4,0 63.5 49,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8
CANNON CA THREADED
32 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
STRAIGHT PLUG GENERAL DUTY CLASS E, R
CA06R/CA3106E
CA06R and CA3106E are straight plugs. They mate with 3100, 3102, CA02L, CA20E, CA20L receptacles and 3101 plugs. If crimp version is required please order CA3106E...F80/F183
(without O-ring) or CA06R...F80/F183 (with O-ring).
Part No. CA (pin insert*) A d1 d2¹ l1 l2
Thread max. max. max.
CA06R10SL-**P*** 5/8-24UNEF-2B 24,1 6,5 53,0 115,0
CA06R12S-**P*** 3/4-20UNEF-2B 25,8 6,5 53,0 115,0
CA06R14S-**P*** 7/8-20UNEF-2B 28,8 9,0 55,0 115,0
CA06R16S-**P*** 1-20UNEF-2B 31,8 11,0 56,0 115,0
CA06R16-**P*** 1-20UNEF-2B 31,8 11,0 66,0 120,0
CA06R18-**P*** 1-1/8-18UNEF-2B 34,1 14,2 68,0 120,0
CA06R20-**P*** 1-1/4-18UNEF-2B 37,4 15,8 68,0 120,0
CA06R22-**P*** 1-3/8-18UNEF-2B 40,5 15,8 68,0 120,0
CA06R24-**P*** 1-1/2-18UNEF-2B 43,8 21,4 76,0 120,0
CA06R28-**P*** 1-3/4-18UNS-2B 50,2 21,4 76,0 120,0
CA06R32-**P*** 2-18UNS-2B 56,4 26,7 76,0 120,0
CA06R36-**P*** 2-1/4-16UN-2B 62,8 31,7 76,0 130,0
¹ max. cable dia
CA3106R
The CA3106R straight plug has a shorter lightweight backshell than CA3106E. It contains an O-ring seal under the coupling nut.
CA3106R plugs mate with 3100, 3102, CA02L, CA20E, CA20L receptacles and 3101 plugs. If crimp version is required please order CA3106R…F80, CA3106R…F183.
Part No. CA (pin insert*) A d1 d2¹ l1
Thread max. max.
CA3106R10SL-**P*** 5/8-24UNEF-2B 24,1 9,6 53,0
CA3106R12S-**P*** 3/4-20UNEF-2B 25,8 10,3 53,0
CA3106R14S-**P*** 7/8-20UNEF-2B 28,8 12,4 55,0
CA3106R16S-**P*** 1-20UNEF-2B 31,8 15,4 56,0
CA3106R16-**P*** 1-20UNEF-2B 31,8 15,4 66,0
CA3106R18-**P*** 1-1/8-18UNEF-2B 34,1 18,4 68,0
CA3106R20-**P*** 1-1/4-18UNEF-2B 37,4 22,0 68,0
CA3106R22-**P*** 1-3/8-18UNEF-2B 40,5 24,7 68,0
CA3106R24-**P*** 1-1/2-18UNEF-2B 43,8 27,6 76,0
CA3106R28-**P*** 1-3/4-18UNS-2B 50,2 31,6 76,0
CA3106R32-**P*** 2-18UNS-2B 56,4 38,5 76,0
CA3106R36-**P*** 2-1/4-16UN-2B 62,8 44,5 76,0
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
CANNON CA THREADED
33www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
STRAIGHT PLUG CLASS F, DN
CA3106F
CA3106F designates a straight plug with backshell for flex tubes or to be combined with a cable clamp. It mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and
3101 plugs.
Part No. CA
(pin insert*)
A d1 d2¹ d3 l1 l2
Thread max. Thread max. min.
CA3106F10SL-**P 5/8-24UNEF-2B 24,1 8,2 5/8-24UNEF-2A 45,0 9,5
CA3106F12S-**P 3/4-20UNEF-2B 25,8 8,2 5/8-20UNEF-2A 45,0 9,5
CA3106F14S-**P 7/8-20UNEF-2B 28,8 11,1 3/4-20UNEF-2A 45,0 9,5
CA3106F16S-**P 1-20UNEF-2B 31,8 14,3 7/8-20UNEF-2A 45,0 9,5
CA3106F16-**P 1-20UNEF-2B 31,8 14,3 7/8-20UNEF-2A 54,0 9,5
CA3106F18-**P 1-1/8-18UNEF-2B 34,1 16,7 1-20UNEF-2A 54,0 9,5
CA3106F20-**P 1-1/4-18UNEF-2B 37,4 19,8 1-3/16-18UNEF-2A 55,0 9,5
CA3106F22-**P 1-3/8-18UNEF-2B 40,5 19,8 1-3/16-18UNEF-2A 58,0 9,5
CA3106F24-**P 1-1/2-18UNEF-2B 43,8 25,4 1-7/16-18UNEF-2A 59,0 9,5
CA3106F28-**P 1-3/4-18UNS-2B 50,2 27,0 1-7/16-18UNEF-2A 60,0 9,5
CA3106F32-**P 2-18UNS-2B 56,4 32,5 1-3/4-18UNS-2A 62,0 11,0
CA3106F36-**P 2-1/4-16UN-2B 62,8 35,7 2-18UNS-2A 64,0 11,8
¹ max. cable dia
CA3106E-DN
CA3106E-DN designates a straight plug with backshell for heat-shrinkable boots. CA3106E-DN has an O-ring seal under the coupling nut.
It mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs
Part No. CA
(pin insert*)
A d1 d2¹ d3 d4 l1 l2
Thread max. max. ±0,2 max. ±0,5
CA3106E10SL-**P-DN 5/8-24UNEF-2B 24,1 7,7 13,3 15,5 49,0 11,7
CA3106E12S-**P-DN 3/4-20UNEF-2B 25,8 7,9 13,3 15,5 49,0 11,7
CA3106E14S-**P-DN 7/8-20UNEF-2B 28,8 10,6 17,0 19,1 49,0 11,7
CA3106E16S-**P-DN 1-20UNEF-2B 31,8 13,5 21,9 23,9 49,0 11,7
CA3106E16-**P-DN 1-20UNEF-2B 31,8 13,5 21,9 23,9 58,0 11,5
CA3106E18-**P-DN 1-1/8-18UNEF-2B 34,1 14,6 21,9 23,9 58,0 11,5
CA3106E20-**P-DN 1-1/4-18UNEF-2B 37,4 18,7 26,2 29,6 60,0 12,7
CA3106E22-**P-DN 1-3/8-18UNEF-2B 40,5 20,8 26,2 29,6 60,0 12,7
CA3106E24-**P-DN 1-1/2-18UNEF-2B 43,8 24,6 34,5 37,8 63,0 12,7
CA3106E28-**P-DN 1-3/4-18UNS-2B 50,2 27,0 34,5 37,8 63,0 12,7
CA3106E32-**P-DN 2-18UNS-2B 56,4 33,3 43,6 47,8 67,0 15,2
CA3106E36-**P-DN 2-1/4-16UN-2B 62,8 38,5 43,6 47,8 68,0 15,2
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
+/
CANNON CA THREADED
34 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
STRAIGHT PLUG PG/ME, SHIELDED
CA3106E…-13/-14/-15
CA3106E…-13/-14/-15 is a shielded straight plug with backshell to accommodate cable braids and heat-shrinkable boots. It has an O-ring under the coupling nut. It mates
with receptacles 3100E…-13/-14/-15, 3102, CA02L, CA20E, CA20L and 3101…-13/-14/-15 plugs.
Part No. CA
(pin insert*)
A d1 d2¹ d3 d4 l1 l1
Thread max. ±0,5 max. max. max.
CA3106E10SL-**P** 5/8-24UNEF-2B 24,1 7,7 18,5 16,3 55,0 55,0
CA3106E12S-**P** 3/4-20UNEF-2B 25,8 7,9 20,0 17,0 55,0 55,0
CA3106E14S-**P** 7/8-20UNEF-2B 28,8 10,6 22,0 20,0 55,0 55,0
CA3106E16S-**P** 1-20UNEF-2B 31,8 13,5 25,0 23,0 60,0 60,0
CA3106E16-**P** 1-20UNEF-2B 31,8 13,5 25,0 23,0 70,0 70,0
CA3106E18-**P** 1-1/8-18UNEF-2B 34,1 14,6 28,0 24,5 70,0 70,0
CA3106E20-**P** 1-1/4-18UNEF-2B 37,4 14,6 32,0 28,5 70,0 70,0
CA3106E22-**P** 1-3/8-18UNEF-2B 40,5 20,8 34,0 30,5 70,0 70,0
CA3106E24-**P** 1-1/2-18UNEF-2B 43,8 24,6 38,0 34,5 70,0 70,0
CA3106E28-**P** 1-3/4-18UNS-2B 50,2 27,0 41,0 37,5 70,0 70,0
CA3106E32-**P** 2-18UNS-2B 56,4 33,3 48,0 44,0 70,0 70,0
CA3106E36-**P** 2-1/4-16UN-2B 62,8 38,5 55,0 51,0 80,0 80,0
¹ max. cable dia
CA06PG/ME
CA06PG/ME is a straight plug for usage of PG or metric glands. CA06PG / ME has an O-ring seal under the coupling nut. The cable gland is not content of the delivery. It
mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs.
Part No. CA
(pin insert*)
A d1 d2 l1
Thread max. PG-Thread Metric max.
CA06PG10SL-**P-*** CA06ME10SL-*P-*** 5/8-24UNEF-2B 24,1 PG9 M16 × 1,5 52,0
CA06PG12S-**P-*** CA06ME12S-**P-*** 3/4-20UNEF-2B 25,8 PG9 M16 × 1,5 52,0
CA06PG14S-**P-*** CA06ME14S-**P-*** 7/8-20UNEF-2B 28,8 PG11 M20 × 1,5 52,0
CA06PG16S-**P-*** CA06ME16S-*P-*** 1-20UNEF-2B 31,8 PG13,5 M20 × 1,5 54,0
CA06PG16-**P-*** CA06ME16-**P-*** 1-20UNEF-2B 31,8 PG13,5 M20 × 1,5 64,0
CA06PG18-**P-*** CA06ME18-**P-*** 1-1/8-18UNEF-2B 34,1 PG13,5 M25 × 1,5 69,0
CA06PG20-**P-*** CA06ME20-**P-*** 1-1/4-18UNEF-2B 37,4 PG16 M25 × 1,5 70,0
CA06PG22-**P-*** CA06ME22-**P-*** 1-3/8-18UNEF-2B 40,5 PG16 M32 × 1,5 73,0
CA06PG24-**P-*** CA06ME24-**P-*** 1-1/2-18UNEF-2B 43,8 PG16 M32 × 1,5 74,0
CA06PG28-**P-*** CA06ME28-**P-*** 1-3/4-18UNS-2B 50,2 PG21 M32 × 1,5 74,0
CA06PG32-**P-*** CA06ME32-**P-*** 2-18UNS-2B 56,4 PG29 M40 × 1,5 76,0
CA06PG36-**P-*** CA06ME36-**P-*** 2-1/4-16UN-2B 62,8 PG29 M40 × 1,5 87,0
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8
CANNON CA THREADED
35www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
90° PLUG
CA3108E
CA3108E are right angle plugs which mate with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs.
If crimp version is required please order CA3108E…F80 (without O-ring), CA3108E…F183 (without O-ring).
Part No. CA
(pin insert*)
A d1 d2¹ l1 l2 l3 l4
Thread max. max. max. max. max.
CA3108E10SL-**P*** 5/8-24UNEF-2B 24,1 6,5 45,0 42,0 22,7 100
CA3108E12S-**P*** 3/4-20UNEF-2B 25,8 6,5 45,0 42,0 22,7 100
CA3108E14S-**P*** 7/8-20UNEF-2B 28,8 9,0 47,0 42,0 27,5 100
CA3108E16S-**P*** 1-20UNEF-2B 31,8 11,0 48,0 45,0 30,0 100
CA3108E16-**P*** 1-20UNEF-2B 31,8 11,0 48,0 45,0 30,0 100
CA3108E18-**P*** 1-1/8-18UNEF-2B 34,1 14,2 58,0 53,0 33,0 100
CA3108E20-**P*** 1-1/4-18UNEF-2B 37,4 15,8 61,0 53,0 37,5 100
CA3108E22-**P*** 1-3/8-18UNEF-2B 40,5 15,8 61,0 53,0 37,5 100
CA3108E24-**P*** 1-1/2-18UNEF-2B 43,8 21,4 66,0 58,0 43,3 100
CA3108E28-**P*** 1-3/4-18UNS-2B 50,2 21,4 66,0 58,0 43,3 100
CA3108E32-**P*** 2-18UNS-2B 56,4 26,7 72,0 66,0 51,7 110
CA3108E36-**P*** 2-1/4-16UN-2B 62,8 31,7 75,0 69,0 58,0 110
¹ max. cable dia
CA3108R
CA3108R are right angle plugs which mate with receptacles CA3100, CA3101, CA3102, CA02L, CA20E and CA20L. CA 3108R comes without cable clamp. If crimp version is
required please order CA3108R…F80 (with O-ring), CA3108R…F183 (with O-ring). It mates with receptacles 3100, 3102, CA02L, CA20L and 3101 plugs.
Part No. CA
(pin insert*)
A d1 d2 l1 l2 l3
Thread max. Thread max. min. max.
CA3108R10SL-**P*** 5/8-24UNEF-2B 24,1 5/8-24UNEF-2A 45,0 9,4 22,0
CA3108R12S-**P*** 3/4-20UNEF-2B 25,8 5/8-20UNEF-2A 45,0 9,4 22,0
CA3108R14S-**P*** 7/8-20UNEF-2B 28,8 3/4-20UNEF-2A 47,0 9,4 24,0
CA3108R16S-**P*** 1-20UNEF-2B 31,8 7/8-20UNEF-2A 48,0 9,4 25,0
CA3108R16-**P*** 1-20UNEF-2B 31,8 7/8-20UNEF-2A 48,0 9,4 25,0
CA3108R18-**P*** 1-1/8-18UNEF-2B 34,1 1-20UNEF-2A 58,0 9,4 27,0
CA3108R20-**P*** 1-1/4-18UNEF-2B 37,4 1-3/16-18UNEF-2A 61,0 9,4 29,0
CA3108R22-**P*** 1-3/8-18UNEF-2B 40,5 1-3/16-18UNEF-2A 61,0 9,4 30,0
CA3108R24-**P*** 1-1/2-18UNEF-2B 43,8 1-7/16-18UNEF-2A 66,0 9,4 32,0
CA3108R28-**P*** 1-3/4-18UNS-2B 50,2 1-7/16-18UNEF-2A 66,0 9,4 34,0
CA3108R32-**P*** 2-18UNS-2B 56,4 1-3/4-18UNS-2A 72,0 11,0 39,5
CA3108R36-**P*** 2-1/4-16UN-2B 62,8 2-18UNS-2A 75,0 12,6 45,0
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8 ¹ max. cable dia
4
CANNON CA THREADED
36 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
STRAIGHT PLUG ENFORCED BACKSHELL, THROUGH-BULKHEAD CLASS E, R
CA06EA
CA06EA is a straight plug with adapter for gland nut sealing and cable clamp. It is designed for usage with jacketed cable. It provides cable strain relief, individual wire
sealing plus sealing of the outer cable jacket. It has an O-ring under the coupling nut. It mates with receptacles 3100, 3102, CA02L, CA20E, CA20L and 3101 plugs
Part No. CA
(pin insert*)
A d1 d2 d3¹ l1
Thread max. max. max.
CA06EA14S-**P*** 7/8-20UNEF-2B 28,8 24,2 11,2 102,0
CA06EA16S-**P*** 1-20UNEF-2B 31,8 27,2 13,5 102,0
CA06EA16-**P*** 1-20UNEF-2B 31,8 27,2 13,5 112,0
CA06EA18-**P*** 1-1/8-18UNEF-2B 34,1 32,2 15,9 112,0
CA06EA20-**P*** 1-1/4-18UNEF-2B 37,4 35,2 19,1 112,0
CA06EA22-**P*** 1-3/8-18UNEF-2B 40,5 37,2 19,1 112,0
CA06EA24-**P*** 1-1/2-18UNEF-2B 43,6 41,2 23,9 115,0
CA06EA28-**P*** 1-3/4-18UNS-2B 50,2 47,2 23,9 115,0
CA06EA32-**P*** 2-18UNS-2B 56,4 53,2 31,8 120,0
CA06EA36-**P*** 2-1/4-16UN-2B 62,8 59,2 34,9 120,0
¹ max. cable dia
THRU-BULKHEADT
TBF
TBF designates a thru-bulkhead featured by a double face construction allowing mating from both ends. It mates with 3106 and 3108 plugs.
Part No. TBF A l1 l2 l3 e d2
Thread max. +0,4 ±0,3 ±0,1 +0,2/– 0,1
TBF10SL-**-**PS*** 5/8-24UNEF-2A 40,1 14,2 25,4 18,2 3,1
TBF14S-**-**PS*** 7/8-20UNEF-2A 40,1 14,2 30,0 23,0 3,1
TBF16S-**-**PS*** 1-20UNEF-2A 40,1 14,2 32,5 24,6 3,1
TBF16-**-**PS*** 1-20UNEF-2A 54,4 19,0 32,5 29,4 3,1
TBF18-**-**PS*** 1-1/8-18UNEF-2A 54,4 19,0 35,0 31,8 3,1
TBF20-**-**PS*** 1-1/4-18UNEF-2A 54,4 19,0 38,0 29,4 3,1
TBF22-**-**PS*** 1-3/8-18UNEF-2A 54,4 19,0 41,0 31,8 3,1
TBF24-**-**PS*** 1-1/2-18UNEF-2A 54,4 20,6 44,5 34,9 3,7
TBF28-**-**PS*** 1-3/4-18UNS-2A 54,4 20,6 50,8 39,7 3,7
TBF32-**-**PS*** 2-18UNS-2A 54,4 22,2 57,0 44,5 4,4
TBF36-**-**PS*** 2-1/4-16UN-2A 54,4 22,2 63,5 49,2 4,4
* For socket inserts substitute "P" with "S" **Add contact arrangement number; see pages 9-21 *** Add modification code; see page 8
3
CANNON CA/TBF THREADED
Socket side Pin side
37www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
Cable Clamp
These cable clamps can be used with or without bushings. Bushings need to be ordered separetely, please see table below.. It is utilized to complete the F class plugs and
receptacles on page 25, 28, 33 and CA3108 90° plug on page 35.
Part No. CA Shell size A d1 l1 l2
Thread max max max
VG95234KK 4 10S, 12S, 12 5/8-24NEF-2B 7,9 20,8 22,5
VG95234KK 6 14S, 14 3/4-20UNEF-2B 11,1 22,4 27,4
VG95234KK 8 16S, 16 7/8-20UNEF-2B 14,2 24,0 29,8
VG95234KK10 18 1-20UNEF-2B 15,8 24,0 32,2
VG95234KK12 20, 22 1-3/16-18UNEF-2B 19,0 24,0 37,4
VG95234KK16 24, 28 1-7/16-18UNEF-2B 23,7 26,4 43,5
VG95234KK20 32 1-3/4-18NS-2B 31,8 28,0 51,7
VG95234KK24 36 2-18NS-2B 34,6 29,6 57,8
TELESCOPING BUSHING
Telescoping bushings (used with cable clamp) keep dirt, moisture out of backshell. Taping or wrapping wires is eliminated since bushing protects wires going through
clamp. Combination of bushings may be used to decrease cable entry diameter to improve sealing. Material is Polychloroprene.
Shell size part no. d1 d2 d3 I Weight
g
10SL 012-8552-000 8.0 6.6 9.9 70.0 4
14S 012-8554-000 10.9 9.1 12.7 67.0 5
16S, 16 012-0218-000 14.0 11.1 19.0 64.0 6
18 012-0219-000 15.7 14.3 22.0 60.0 4
20, 22 012-0220-000 18.8 15.9 26.9 57.0 7
24, 28 012-8556-000 23.6 21.5 33.3 54.0 13
32 012-8558-000 31.5 26.8 40.4 51.0 26
36 012-0223-000 34.7 31.8 46.8 48.0 30
24.28 012-8555-000 21.2 16.6 26.9 57.0 13
32 012-8557-000 26.5 21.5 33.3 54.0 26
Shell size Combination of:
24, 28 012-8556-000 and 012-8555-000
32 012-8558-000 and 012-8557-000
36 012-0223-000 and 012-8558-000
38 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
METAL PROTECTING CAPS FOR RECEPTACLES WITH CORD
Shell
Size
Order designation ØA D ØE F ØG H
A66 A240 Thread max. max. ca. +0,4 max.
10SL CA121003-801 CA121003-1681 5/8-24UNEF-2B 11.7 20.2 100 3.4 16.0
12S CA121003-802 CA121003-1682 3/4-20UNEF-2B 11.7 23.4 115 3.4 16.0
14S CA121003-803 CA121003-1683 7/8-20UNEF-2B 11.7 26.6 115 3.4 16.0
16S, 16 CA121003-804 CA121003-1684 1-20UNEF-2B 11.7 29.8 115 3.4 16.0
18 CA121003-806 CA121003-1686 1 1/8-18UNEF-2B 11.7 32.9 115 3.4 16.0
20 CA121003-807 CA121003-1687 1 1/4-18UNEF-2B 11.7 36.1 125 3.4 16.0
22 CA121003-808 CA121003-1688 1 3/8-18UNEF-2B 11.7 39.4 125 3.4 16.0
24 CA121003-809 CA121003-1689 1 1/2-18UNEF-2B 11.7 42.6 140 4.2 16.0
28 CA121003-810 CA121003-1690 1 3/4-18UNS-2B 13.3 48.9 200 4.2 18.0
32 CA121003-811 CA121003-1691 2-18UNS-2B 13.3 55.3 200 4.6 18.0
36 CA121003-812 CA121003-1692 2 1/4-16UN-2B 13.3 61.6 200 4.6 18.0
METAL PROTECTING CAPS FOR RECEPTACLES WITH CHAIN
Shell
Size
Order designation ØA D ØE F ØG H
A66 A232 A233 A240 Thread max. max. ca. +0,4 max.
10SL CA2209-5101 CA121003-641 CA121003-621 CA121003-681 5/8-24UNEF-2B 11.7 20.2 100 3.4 16.0
12S CA2209-5102 CA121003-642 CA121003-622 CA121003-682 3/4-20UNEF-2B 11.7 23.4 115 3.4 16.0
14S CA2209-5103 CA121003-643 CA121003-623 CA121003-683 7/8-20UNEF-2B 11.7 26.6 115 3.4 16.0
16S, 16 CA2209-5104 CA121003-644 CA121003-624 CA121003-684 1-20UNEF-2B 11.7 29.8 115 3.4 16.0
18 CA2209-5105 CA121003-646 CA121003-626 CA121003-686 1 1/8-18UNEF-2B 11.7 32.9 115 3.4 16.0
20 CA2209-5106 CA121003-647 CA121003-627 CA121003-687 1 1/4-18UNEF-2B 11.7 36.1 125 3.4 16.0
22 CA2209-5107 CA121003-648 CA121003-628 CA121003-688 1 3/8-18UNEF-2B 11.7 39.4 125 3.4 16.0
24 CA2209-5108 CA121003-649 CA121003-629 CA121003-689 1 1/2-18UNEF-2B 11.7 42.6 140 4.2 16.0
28 CA2209-5109 CA121003-650 CA121003-630 CA121003-690 1 3/4-18UNS-2B 13.3 48.9 200 4.2 18.0
32 CA2209-5110 CA121003-651 CA121003-631 CA121003-691 2-18UNS-2B 13.3 55.3 200 4.6 18.0
36 CA2209-5111 CA121003-652 CA121003-632 CA121003-692 2 1/4-16UN-2B 13.3 61.6 200 4.6 18.0
39www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
METAL PROTECTING CAPS FOR PLUGS WITH CORD
Shell Size Order designation ØA C D ØE ØF G ØH I
A66 A240 Thread ±0,5 max. +0,2 max. ca. +0,4 max.
10SL CA121004-801 CA121004-1681 5/8-24UNEF-2A 14.1 16.3 11.5 16.7 100 3.8 20.5
12S CA121004-802 CA121004-1682 3/4-20UNEF-2A 18.9 21.0 14.4 19.8 115 3.8 25.0
14S CA121004-803 CA121004-1683 7/8-20UNEF-2A 18.9 21.0 17.6 23.0 115 3.8 25.0
16S, 16 CA121004-804 CA121004-1684 1-20UNEF-2A 18.9 21.0 20.8 26.2 115 3.8 25.0
18 CA121004-806 CA121004-1686 1 1/8-18UNEF-2A 18.9 21.0 23.9 29.4 115 3.8 25.0
20 CA121004-807 CA121004-1687 1 1/4-18UNEF-2A 18.9 21.0 27.1 32.5 125 4.6 25.0
22 CA121004-808 CA121004-1688 1 3/8-18UNEF-2A 18.9 21.0 30.3 35.7 125 4.6 25.0
24 CA121004-809 CA121004-1689 1 1/2-18UNEF-2A 18.9 21.0 33.5 38.9 140 4.6 25.0
28 CA121004-810 CA121004-1690 1 3/4-18UNS-2A 18.9 21.0 39.0 45.2 200 4.6 25.0
32 CA121004-811 CA121004-1691 2-18UNS-2A 18.9 21.0 45.4 51.6 200 5.4 25.0
36 CA121004-812 CA121004-1692 2 1/4-16UN-2A 18.9 21.0 50.9 57.9 200 5.4 25.0
METAL PROTECTING CAPS FOR PLUGS WITH CHAIN
Shell Size Order designation ØA C D ØE ØF G ØH I
A66 A232 A233 A240 Thread ±0,5 max. +0,2 max. ca. +0,4 max.
10SL CA17530-5101 CA121004-641 CA121004-621 CA121004-681 5/8-24UNEF-2A 14.1 16.3 11.5 16.7 100 3.8 20.5
12S CA17530-5102 CA121004-642 CA121004-622 CA121004-682 3/4-20UNEF-2A 18.9 21.0 14.4 19.8 115 3.8 25.0
14S CA17530-5103 CA121004-643 CA121004-623 CA121004-683 7/8-20UNEF-2A 18.9 21.0 17.6 23.0 115 3.8 25.0
16S, 16 CA17530-5104 CA121004-644 CA121004-624 CA121004-684 1-20UNEF-2A 18.9 21.0 20.8 26.2 115 3.8 25.0
18 CA17530-5105 CA121004-646 CA121004-626 CA121004-686 1 1/8-18UNEF-2A 18.9 21.0 23.9 29.4 115 3.8 25.0
20 CA17530-5106 CA121004-647 CA121004-627 CA121004-687 1 1/4-18UNEF-2A 18.9 21.0 27.1 32.5 125 4.6 25.0
22 CA17530-5107 CA121004-648 CA121004-628 CA121004-688 1 3/8-18UNEF-2A 18.9 21.0 30.3 35.7 125 4.6 25.0
24 CA17530-5108 Ca121004-649 CA121004-629 CA121004-689 1 1/2-18UNEF-2A 18.9 21.0 33.5 38.9 140 4.6 25.0
28 CA17530-5109 CA121004-650 CA121004-630 CA121004-690 1 3/4-18UNS-2A 18.9 21.0 39.0 45.2 200 4.6 25.0
32 CA17530-5110 CA121004-651 CA121004-631 CA121004-691 2-18UNS-2A 18.9 21.0 45.4 51.6 200 5.4 25.0
36 CA17530-5111 CA121004-652 CA121004-632 CA121004-692 2 1/4-16UN-2A 18.9 21.0 50.9 57.9 200 5.4 25.0
40 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
PROTECTIVE CAPS PLASTIC*
Material: Polyethene
Color: Red
Part No. CA
3100/3101/3102
CA
3106/3108
d1 l1 d2 d3 Part No. CA
3100/3101/3102
CA
3106/3108
d1 l1 d2 d3
max. max. ±0,2 max. max. max. ±0,2 max.
025-0460-000 10SL 21,5 17,8 15,2 16,9 025-0468-000 20 38,1 17,8 31,5 33,4
025-0477-000 10SL 20,4 12,5 14,0 15,7 025-0469-000 22 39,1 14,6 32,6 34,2
025-0478-000 12S, 12 23,1 14,6 16,8 18,5 025-0486-000 22 41,4 17,8 34,5 36,5
025-0462-000 12S, 12 24,7 17,8 18,5 20,2 025-0487-000 24 42,3 14,6 35,5 37,4
025-0479-000 14S, 14 26,3 14,6 19,9 21,6 025-0510-000 24 44,2 17,8 37,8 39,8
025-0463-000 14S, 14 27,8 17,8 21,6 23,3 025-0488-000 28 48,4 14,6 41,6 43,5
025-0480-000 16S, 16 29,5 14,6 23,1 24,8 025-0501-000 28 50,4 17,8 43,9 45,9
025-0498-000 16S, 16 31,5 17,8 25,1 26,8 025-0489-000 32 54,8 14,6 48,0 49,9
025-0484-000 18 32,8 14,6 25,9 27,8 025-0502-000 32 57,0 17,8 50,3 52,2
025-0507-000 18 34,7 17,8 28,2 30,1 025-0490-000 36 61,3 14,6 54,2 56,3
025-0467-000 20 35,4 17,8 28,3 30,2 025-0503-000 36 63,4 17,8 56,6 58,6
*Dust caps for the connector mating side only
WIRE HOLE FILLERS
Where contacts are not engaged, the contact cavities are to be closed with wire hole fillers. Wire hole fillers are inserted into the rear end of the grommet
(see CA-B Assembly instruction available on the ITT webpage www.ittcannon.com)
For contact size d1 d2 l1 l2 Part number Color
AWG metric ±0,1 ±0,2 ±0,1 ±0,3
20 10 2,3 3,0 2,4 9,7 225-1000-000 red
16S 15S 2,8 3,7 1,5 4,8 225-8510-000 nature
16 15 2,8 3,7 3,2 11,9 225-0017-000 blue
12 25 3,7 4,6 3,2 11,9 225-0018-000 yellow
8 60/100 5,0 5,8 3,2 11,9 225-0019-000 white
4 160 7,6 8,5 3,2 11,9 225-8502-000 green
0 500 12,8 13,5 3,2 11,9 225-8503-000 black
41www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
SEALING GASKETS
For front and rear panel mounting. These sealing gaskets made of neoprene are used with flange receptacles for sealing purposes between the shell and the flange.
Part No. Shell size d1 d2 l1 e
+0,2 +0,2 ±0,3 ±0,1
075-8512-000 10SL 15,7 4,2 25,4 18,2
075-8513-000 12S 18,9 4,2 28,0 20,6
075-8514-000 14S 22,1 4,2 30,0 23,0
075-8515-000 16S,16 25,3 4,2 32,5 24,6
075-8516-000 18 28,4 4,2 35,0 27,0
075-8517-000 20 31,6 4,2 38,0 29,4
075-8518-000 22 34,8 4,2 41,0 31,8
075-8519-000 24 38,0 4,2 44,5 34,9
075-8520-000 28 44,3 5,1 50,8 39,7
075-8521-000 32 50,7 5,1 57,0 44,5
075-8522-000 36 57,0 5,1 63,5 49,2
Dummy Receptacle
The dummy receptacle holds 3106 or 3108 plugs when not in use. Material: Aluminum alloy, finish is olive drab chromate over cadmium.
Part No. CA for shell size A l1 l2 l3 d1 e
Thread max ±0,2 ±0,7 +0,2/– 0,1 ±0,1
248-0089-001 10SL 5/8-24UNEF-2B 17,2 2,4 25,4 3,1 18,2
248-0774-000 12S 3/4-20UNEF-2B 17,2 2,4 28,7 3,1 20,6
248-0093-001 14S 7/8-20UNEF-2B 17,9 2,4 30,1 3,1 23,0
248-0095-001 16S 1-20UNEF-2B 17,2 2,4 32,5 3,1 24,6
248-0094-001 16 1-20UNEF-2B 22,0 2,4 32,5 3,1 24,6
248-0096-001 18 1-1/8-18UNEF-2B 22,5 3,0 34,9 3,1 27,0
248-0772-000 20 1-1/4-18UNEF-2B 22,5 3,0 38,0 3,1 29,4
248-0773-000 22 1-3/8-18UNEF-2B 22,5 3,0 41,3 3,1 31,8
248-0099-001 24 1-1/2-18UNEF-2B 24,1 3,0 44,4 3,7 34,9
248-0100-001 28 1-3/4-18UNS-2B 24,1 3,0 50,8 3,7 39,7
248-0101-001 32 2-18UNS-2B 27,0 4,3 57,1 4,4 44,5
248-0102-001 36 2-1/4-16UN-2B 27,0 4,3 63,4 4,4 49,2
42 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
CONTACTS
Standard contacts and contacts with reduced termination diameter
Pin contacts Finish: A36 – silver plated and passivated / A176 – gold plated
Contact size Termination size Part no. with finish d1 d4 d6 d7 l1 l3 Color code
mm² AWG A36 A176 –0,05 ± 0,15 ± 0,5
10/20 0,5 – 1,0 20 /18 030-8585-000 030-8585-006 1,04 1,50 1,50 2,40 28,4 4,75 –
0,2 – 0,4 26 /22 030-8585-010 030-8585-016 1,04 1,50 0,90 2,40 28,4 4,75 blue
15S /16S 0,75 – 1,5 18 /16 030-8586-000 030-8586-006 1,60 1,75 1,75 2,75 27,4 3,85 –
0,3 – 0,6 22 /20 330-8744-000 330-8744-006 1,60 1,75 1,20 2,75 27,4 3,85 red
0,14 – 0,38 22 /26 030-8586-010 030-8586-016 1,60 1,75 0,90 2,75 27,4 3,85 blue
15 /16 0,75 – 1,5 18 /16 030-8587-000 030-8587-006 1,60 1,75 1,75 2,75 31,4 7,90 –
0,3 – 0,6 22 /20 330-8659-000 030-8559-006 1,60 1,75 1,20 2,75 31,4 7,90 red
0,14 – 0,38 22 /26 030-8587-030 030-8587-036 1,60 1,75 0,90 2,75 31,4 7,90 blue
25 /12 2,0 – 3,0 14 /12 030-8588-000 030-8588-006 2,40 3,30 2,50 3,80 37,0 7,90 –
0,75 – 1,5 18 /16 030-8588-010 030-8588-016 2,40 3,30 1,75 3,40 37,0 7,90 black
4,0 – 030-8588-054 2,40 3,30 2,80 3,80 37,0 7,90
60/100/8 – 8 030-8612-000 030-8612-006 3,60 6,25 4,55 6,80 39,6 6,35 –
6,0 10 030-8589-000 3,60 6,25 3,50 6,80 39,6 6,35 yellow
10,0 – 030-8590-000 3,60 6,25 4,80 6,80 39,6 6,35 –
2,0 – 3,0 14 /12 030-8612-010 3,60 6,25 2,50 6,80 39,6 6,35 green
160/4 – 4 030-8613-000 5,75 9,55 7,10 9,55 39,6 6,35 –
16,0 – 030-8591-000 5,75 9,55 6,20 9,55 39,6 6,35 –
10,0 – 030-8591-020 5,75 9,55 4,80 9,55 39,6 6,35 –
– 6 030-8613-010 5,75 9,55 5,70 9,55 39,6 6,35 brown
500/0 – 0 030-8614-000 9,10 13,55 11,5 14,35 41,0 6,35 –
50,0 – 030-8592-000 9,10 13,55 10,7 14,35 41,0 6,35 –
25,0 4 030-8614-010 9,10 13,55 7,60 14,35 41,0 6,35 white
35,0 2 030-8614-020 9,10 13,55 9,10 14,35 41,0 6,35 grey
16,0 – 030-8614-030 9,10 13,55 6,20 14,35 41,0 6,35 –
SIZE 15S/16S, 15/16, 25/12, 60/100/8, 160/4, 500/0 SIZE 10/20
43www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
ACCESSORIES
CONTACTS
Standard contacts and contacts with reduced termination diameter
Socket contacts Finish: A36 – silver plated and passivated / A176 – gold plated
Contact size Wire size Part no. with finish d1 d2 d3 d5 d6 l1 l3 Color code
mm² AWG A36 A176 + 0,05 ± 0,2 ± 0,1
10/20 0,5 –1,0 20/18 031-8554-000 031-8554-006 2,0 1,07 1,5 1,5 2,4 36,8 ± 0,3 4,75 –
0,2 – 0,4 26/22 031-8554-010 031-8554-016 2,0 1,07 1,5 0,9 2,4 36,8 ± 0,3 4,75 blue
15S /16S 0,75 –1,5 18 /16 031-8555-110 031-8555-115 3,2 1,65 1,75 1,75 2,75 29,1 3,9 –
0,3 – 0,6 22/20 031-8688-110 031-8688-115 3,2 1,65 1,75 1,2 2,75 29,1 3,9 red
0,14 – 0,38 22/26 031-8555-130 031-8555-135 3,2 1,65 1,75 0,9 2,75 29,1 3,9 blue
15 /16 0,75 –1,5 18 /16 031-8556-110 031-8556-115 3,2 1,65 1,75 1,75 2,75 37,8 7,9 –
0,3 – 0,6 22/20 031-8639-120 031-8639-115 3,2 1,65 1,75 1,2 2,75 37,8 7,9 red
0,14 – 0,38 22/26 031-8556-130 031-8556-135 3,2 1,65 1,75 0,9 2,75 37,8 7,9 blue
25 /12 2,0 – 3,0 14/12 031-8557-000 031-8557-006 4,8 2,45 3,3 2,5 3,8 37,0 7,9 –
0,75 –1,5 18/16 031-8557-020 031-8557-026 4,8 2,45 3,3 1,75 3,4 37,0 7,9 black
4,0 – 031-8557-010 4,8 2,45 3,3 2,8 3,8 37,0 7,9 –
0,3 – 0,6 22/20 031-8557-040 4,8 2,45 3,3 1,2 2,75 37,0 7,9 –
60/100/8 – 8 031-8519-000 031-8519-006 6,5 3,65 6,25 4,55 6,8 40,1 6,35 –
6,0 10 031-8558-000 6,5 3,65 6,25 3,5 6,8 40,1 6,35 yellow
10,0 – 031-8559-000 6,5 3,65 6,25 4,8 6,8 40,1 6,35 –
2,0 – 3,0 14 /12 031-8519-010 6,5 3,65 6,25 2,5 6,8 40,1 6,35 green
160/4 – 4 031-8520-000 8,6 5,8 9,55 7,1 9,55 40,1 6,35 –
16,0 – 031-8560-000 8,6 5,8 9,55 6,2 9,55 40,1 6,35 –
10,0 – 031-8560-020 8,6 5,8 9,55 4,8 9,55 40,1 6,35 –
– 6 031-8520-010 8,6 5,8 9,55 5,7 9,55 40,1 6,35 brown
500/0 – 0 031-8521-000 13,2 9,15 13,55 11,5 14,35 41,6 6,35 –
50,0 – 031-8561-000 13,2 9,15 13,55 10,7 14,35 41,6 6,35 –
25,0 4 031-8521-010 13,2 9,15 13,55 7,6 14,35 41,6 6,35 white
35,0 2 031-8521-020 13,2 9,15 13,55 9,1 14,35 41,6 6,35 grey
16,0 – 031-8521-030 13,2 9,15 13,55 6,2 14,35 41,6 6,35 –
SIZE 10/20 SIZE 25/12
SIZE 15S/16S
15/16
SIZE 60/100/8
160/4
500/0
44 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
CA Layout Overview with standard contact
wire size
The table below shows all available contact arrangements
(layouts) available for ITT’s CA product line.
For each layout the crimp contact styles and wire cross sections
used as default are shown.
If other crimp sizes are required the connector can be ordered
with suffix “-F0” (without contacts).
See ordering key on page 8 for details. In this case, separate
contacts can be selected according to contact selection tables
on pages 42-43.
*The numbers represent modifications for contact termination as
listed on page 8. E.g. CA3106E20-29S-14 is the modification
for a shielded endbell with metric crimp
contacts.
Layout No. of
Contacts
Contact
size
Contact Termination*
-F183, -14 -F80, -15
wire size mm² wire size AWG
10SL-3 3 15S/16S 0,75-1,5 18/16
10SL-4 2 15S/16S 0,75-1,5 18/16
12S-3 2 15S/16S 0,75-1,5 18/16
12S-4 1 15S/16S 0,75-1,5 18/16
12SA10 4 15S/16S 0,75-1,5 18/16
14S-1 3 15S/16S 0,75-1,5 18/16
14S-2 4 15S/16S 0,75-1,5 18/16
14S-4 1 15S/16S 0,75-1,5 18/16
14S-5 5 15S/16S 0,75-1,5 18/16
14S-6 6 15S/16S 0,75-1,5 18/16
14S-7 3 15S/16S 0,75-1,5 18/16
14S-9 2 15S/16S 0,75-1,5 18/16
14SA7 7 15S/16S 0,75-1,5 18/16
16S-1 7 15S/16S 0,75-1,5 18/16
16S-4 2 15S/16S 0,75-1,5 18/16
16S-5 3 15S/16S 0,75-1,5 18/16
16S-8 5 15S/16S 0,75-1,5 18/16
16-7 2 15/16 0,75-1,5 18/16
1
60/100/8
10.0 8
16-9 2
15/16
0,75-1,5 18/16
2
25/12
2,0-3,0 14/12
16-10 3
25/12
2,0-3,0 14/12
16-11 2
25/12
2,0-3,0 14/12
16-12 1
160/4
16.0 4
16A11 2
25/12
2,0-3,0 14/12
18-1 10
15/16
0,75-1,5 18/16
18-3 2
25/12
2,0-3,0 14/12
18-4 4
15/16
0,75-1,5 18/16
18-5 2
25/12
2,0-3,0 14/12
1
15/16
0,75-1,5 18/16
18-6 1
160/4
16.0 4
18-7 1
60/100/8
10.0 8
18-8 1 25/12 2,0-3,0 14/12
7 15/16 0,75-1,5 18/16
18-9 5 15/16 0,75-1,5 18/16
Layout No. of
Contacts
Contact
size
Contact Termination*
-F183, -14 -F80, -15
wire size mm² wire size AWG
2 25/12 2,0-3,0 18/16
18-10 4 25/12 2,0-3,0 14/12
18-11 5 25/12 2,0-3,0 14/12
18-12 6 15/16 0,75-1,5 18/16
18-13 3 25/12 2,0-3,0 14/12
160/100/8 10.0 8
18-17 2 25/12 2,0-3,0 14/12
5 15/16 0,75-1,5 18/16
18-19 10 15/16 0,75-1,5 18/16
18-20 5 15/16 0,75-1,5 18/16
18-21 3 25/12 2,0-3,0 14/12
18-22 3 15/16 0,75-1,5 18/16
20-2 1 500/0 50.0 0
20-3 3 25/12 2,0-3,0 14/12
20-4 4 25/12 2,0-3,0 14/12
20-6 3 15/16 0,75-1,5 18/16
20-7 8 15/16 0,75-1,5 18/16
20-8 4 15/16 0,75-1,5 18/16
260/100/8 10.0 8
20-11 13 15/16 0,75-1,5 18/16
20-14 3 25/12 2,0-3,0 14/12
260/100/8 10.0 8
20-15 7 25/12 2,0-3,0 14/12
20-16 2 25/12 2,0-3,0 14/12
715/16 0,75-1,5 18/16
20-17 5 25/12 2,0-3,0 14/12
115/16 0,75-1,5 18/16
20-18 3 25/12 2,0-3,0 14/12
615/16 0,75-1,5 18/16
20-19 3 60/100/8 10.0 8
20-22 3 15/16 0,75-1,5 18/16
360/100/8 10.0 8
20-23 2 60/100/8 10.0 8
20-24 2 15/16 0,75-1,5 18/16
260/100/8 10.0 8
20-27 14 15/16 0,75-1,5 18/16
20-29 17 15/16 0,75-1,5 18/16
20-33 11 15/16 0,75-1,5 18/16
20A9 9 25/12 2,0-3,0 14/12
20A24 24 15/16 0,75-1,5 18/16
20A48 19 15/16 0,75-1,5 18/16
22-1 2 60/100/8 10.0 8
22-2 3 60/100/8 10.0 8
22-4 2 25/12 2,0-3,0 14/12
260/100/8 10.0 8
22-5 2 25/12 2,0-3,0 14/12
415/16 0,75-1,5 18/16
22-7 1 500/0 50.0 0
22-8 2 25/12 2,0-3,0 14/12
22-9 3 25/12 2,0-3,0 14/12
22-10 4 15/16 0,75-1,5 18/16
22-12 2 60/100/8 10.0 8
315/16 0,75-1,5 18/16
22-14 19
15/16
0,75-1,5 18/16
22-15 5
25/12
2,0-3,0 14/12
1
15/16
0,75-1,5 18/16
45www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Layout No. of
Contacts
Contact
size
Contact Termination*
-F183, -14 -F80, -15
wire size mm² wire size AWG
22-16 3 25/12 2,0-3,0 14/12
6 15/16 0,75-1,5 18/16
22-19 14 15/16 0,75-1,5 18/16
22-20 9 15/16 0,75-1,5 18/16
22-21 2 15/16 0,75-1,5 18/16
1500/0 50.0 0
22-22 4
60/100/8
10.0 8
22-23 8
25/12
2,0-3,0 14/12
22-27 1
60/100/8
10.0 8
8
15/16
0,75-1,5 18/16
22-28 7 25/12 2,0-3,0 14/12
24-2 7 25/12 2,0-3,0 14/12
24-4 1 500/0 50.0 0
3 15/16 0,75-1,5 18/16
24-5 16 15/16 0,75-1,5 18/16
24-6 8 25/12 2,0-3,0 14/12
24-7 2 25/12 2,0-3,0 14/12
14 15/16 0,75-1,5 18/16
24-9 2 160/4 16.0 4
24-10 7 60/100/8 10.0 8
24-11 6 25/12 2,0-3,0 14/12
360/100/8 10.0 -
24-12 3 25/12 2,0-3,0 14/12
2160/4 16.0 4
24-19 12 15/16 0,75-1,5 18/16
24-20 2 25/12 2,0-3,0 14/12
915/16 0,75-0,5 18/16
24-22 4 60/100/8 10.0 8
24-27 7 15/16 0,75-1,5 18/16
24-28 24 15/16 0,75-1,5 18/16
24A24 12 25/12 2,0-3,0 14/12
24A28 28 15/16 0,75-1,5 18/16
24A51 13 15/16 0,75-1,5 18/16
525/12 2,0-3,0 14/12
160/100/8 10.0 8
28-2 12 15/16 0,75-1,5 18/16
225/12 2,0-3,0 14/12
28-5 2 15/16 0,75-1,5 18/16
2160/4 16.0 4
125/12 2,0-3,0 14/12
28-9 6 15/16 0,75-1,5 18/16
625/12 2,0-3,0 14/12
28-10 2 160/4 16.0 4
260/100/8 10.0 8
325/12 2,0-3,0 14/12
28-11 18 15/16 0,75-1,5 18/16
425/12 2,0-3,0 14/12
28-12 26 15/16 0,75-1,5 18/16
28-15 35 15/16 0,75-1,5 18/16
28-16 20 15/16 0,75-1,5 18/16
28-20 4
15/16
0,75-1,5 18/16
10
25/12
2,0-3,0 14/12
28-21 37
15/16
0,75-1,5 18/16
28-22 3 160/4 16.0 4
Layout No. of
Contacts
Contact
size
Contact Termination*
-F183, -14 -F80, -15
wire size mm² wire size AWG
3 15/16 0,75-1,5 18/16
28-51 12 25/12 2,0-3,0 14/12
28A16 4 160/4 16.0 4
5 15/16 0,75-1,5 18/16
28A51 43 15/16 0,75-1,5 18/16
28A63 19
15/16
0,75-1,5 18/16
9
25/12
2,0-3,0 14/12
32-1 3
25/12
2,0-3,0 14/12
2
500/0
50.0 0
32-5 2 500/0 50.0 0
32-6 16 15/16 0,75-1,5 18/16
2 25/12 2,0-3,0 14/12
3
60/100/8
10.0 8
2
160/4
16.0 4
32-7 28 15/16 0,75-1,5 18/16
7 25/12 2,0-3,0 14/12
32-8 6 25/12 2,0-3,0 14/12
24 15/16 0,75-1,5 18/16
32-9 12 15/16 0,75-1,5 18/16
2160/4 16 4
32-13 5 25/12 2,0-3,0 14/12
18 15/16 0,75-1,5 18/16
32-15 6 25/12 2,0-3,0 14/12
2500/0 50.0 0
32-17 4 160/4 16.0 4
32A10 54 15/16 0,75-1,5 18/16
32A47 47 15/16 0,75-1,5 18/16
32A55 55 15/16 0,75-1,5 18/16
32A69 41 10/20 0,5-1,0 20/18
20 15/16 0,75-1,5 18/16
36-3 3 500/0 50.0 0
325/12 2,0-3,0 14/12
36-5 4 500/0 50.0 0
36-6 4 160/4 16.0 4
2500/0 50.0 0
36-7 7 25/12 2,0-3,0 14/12
40 15/16 0,75-1,5 18/16
36-8 1 25/12 2,0-3,0 14/12
46 15/16 0,75-1,5 18/16
36-9 14 15/16 0,75-1,5 18/16
14 25/12 2,0-3,0 14/12
260/100/8 10.0 8
1160/4 16.0 4
36-10 48 15/16 0,75-1,5 18/16
36-14 5 60/100/8 10.0 8
525/12 2,0-3,0 14/12
615/16 0,75-1,5 18/16
36-15 35 15/16 0,75-1,5 18/16
36A34 52 15/16 0,75-1,5 18/16
36A35 4 15/16 0,75-1,5 18/16
4500/0 50.0 0
36A46 27
25/12
2,0-3,0 14/12
36A98 8
60/100/8
10 8
31
15/16
0,75-1,5 18/16
36A99 15 15/16 0,75-1,5 18/16
50 10/20 0,2-0,4 26/22
46 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Crimp Tools
For pin and socket contacts according VG95234 and for Cannon contacts with reduced coupling dimensions.
Insertion & Extraction Tools
Crimp contacts should be inserted or, if needed, extracted with the correct tools. In order to avoid damage to the insulator it is
recommended to use guide pins for the insertion of socket contacts.
Contact Size
Wire size mm2AWG Hand Crimp Tools Order Reference Crimp Locator Order Reference
10 0,5-1,0 20/18 600325 121586-0034
0,2-0,4 26/22
15S/16S 0,75-1,5 18/16
TH 452 995-0002-052
0,3-0,6 22/20
0,14-0,38 22/26
15S/16S 0,750-1,5 18/16
M22520-1-01 995-0001-585
0,3-0,6 22/20
0,14-0,38 22/26
15/16 0,75-1,5 18/16
0,3-0,6 22/20
0,14-0,38 22/26
25/12 2,0-3,0 14/12
0,75-1,5 18/16
4
Contact Size
Wire size mm2AWG Hydraulic
Handpump Order Number Electro Hydraulic
Tool Order Number
60/100/8 6
2,0-3,0
8
10
14/12
HPW400U-ITT 121586-5257 HP400EL-ITT 121586-5253
160/4 16
10
4
6
500/0 50
25
35
16
0
-
4
2
-
Insertion Tools
Part No. Order Reference
Insertion Pliers
Part No. Order Reference
Extraction Tools
Part No. Order Reference
Guiding Pins for
Socket Contacts
CIT 20 121086-3009 CIT-F80-20 121086-0098 CET-F80-20 121086-0082
CIT 16 121086-3008 CIT-F80-16 121086-0097 CET-F80-16 121086-0081 27977-16T50
CIT 12 121086-3007 CIT-F80-12 121086-0096 CET-F80-12 121086-0080 27977-12T8
CIT 8 121086-0095 CET-8 121086-0079
CIT 4 121086-0094 CET-4 121086-0078
CIT 0 121086-0093 CET-0 121086-0077
Pin
Socket
Tools
47www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Crimp Dies
Product Contact Size Part Number Hex. Diameter Stamped label Cable Size
AWG mm2
Crimp die
60/100/8 121586-5231 5,20 01 8 6/10
160/4 121586-5230 7,25 02 4 16
500/0 121586-5229 11,40 03 0 50
Locator MS / CA 121586-5232
Version Description Marking Part Number
AElectro-Hydraulic Crimp tool set with foot pedal, hand control and crimp head HP700EL-ITT 121586-5279
A (Accessory) Switch mode power supply SNT4-ITT 121586-5280
A (Accessory) Lithium Ion Battery 18V 3A with recharger LGA4-ITT 121586-5281
BManually operated Hydraulic handtool HPW400U-ITT 121586-5257
CHand Crimp Tool M22520-1-01 995-0001-585
Description Marking Part Number
Pneumatic crimp tool (AWG 12 - 20) WA27F-CE 121586-5067
Bench mount BM-2 121586-5068
Foot pedal WA10 121586-5069
Gauge M22520-3-1 995-0001-684
Basic - Hydraulic - Electrically driven tool - Version A Basic - Hydraulic - Manual Operated tool - Version B
Basic – Manual operated crimp tool – Version C
H- Crimp Head
Crimp tool and Bench mount Foot pedal Gauge
Crimp die with locator Locator
Crimp die
Electro Hydraulic
Crimp Tool
Foot Pedal
H- Crimp
Head
Pump Handle with
Reset Function
Handle
Notes
1. For insertion and extraction of the contacts and for connector
assembly see Assembly instructions CAS25094
2. Standard contacts acc. to VG95234
48 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Product Safety Information
1. Material content and physical form
Electrical connectors do not usually contain hazardous materials.
They contain conducting and non-conducting materials and can
be divided into two groups.
a) Printed circuit types and low cost audio types which employ all
plastic insulators and casings.
b) Rugged, Fire Barrier and High Reliability types with metal
casings and either natural rubber, synthetic rubber, plastic or glass
insulating materials. Contact materials vary with type of connector
and also application and are usually manufactured from either:
Copper, copper alloys, nickel, alumel, chromel or steel. In special
applications, other alloys may be specified.
2. Fire characteristics and electric shock hazard
There is no fire hazard when the connector is correctly wired and
used within the specified parameters. Incorrect wiring or assembly
of the connector or careless use of metal tools or conductive fluids,
or transit damage to any of the component parts may cause electric
shock or burns. Live circuits must not be broken by separating mated
connectors as this may cause arcing, ionization and burning.
Heat dissipation is greater at maximum resistance in a circuit.
Hot spots may occur when resistance is raised locally by damage,
e.g. cracked or deformed contacts, broken strands of wire.
Local overheating may also result from the use of the incorrect
application tools or from poor quality soldering or slack screw
terminals. Overheating may occur if the ratings in the product
Data Sheet / Catalog are exceeded and can cause breakdown of
insulation and hence electric shock. If heating is allowed to
continue it intensifies by further increasing the local resistance
through loss of temper of spring contacts, formation of oxide film
on contacts and wires and leakage currents through carbonization
of insulation and tracking paths. Fire can then result in the
presence of combustible materials and this may release noxious
fumes. Overheating may not be visually apparent. Burns may result
from touching overheated components.
3. Handling
Care must be taken to avoid damage to any component parts of
electrical connectors during installation and use. Although there
are normally no sharp edges, care must be taken when handling
certain components to avoid injury to fingers. Electrical connectors
may be damaged in transit to the customer, and damage may
create hazards. Products should therefore be examined prior to
installation /
use and rejected if found to be damaged.
4. Disposal
Incineration of certain materials may release noxious or even toxic
fumes.
5. Application
Connectors with exposed contacts should not be selected for use
on the current supply side of an electrical circuit, because an
electric shock could result from touching exposed contacts on an
unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are
potentially hazardous and care should be taken to ensure that
such voltages cannot be transmitted in any way to exposed metal
parts of the connector body.
The connector and wiring should be checked, before making live,
to have no damage to metal parts or insulators, no solder blobs,
loose strands, conducting lubricants, swarf, or any other undesired
conducting particles. Circuit resistance and continuity check should
be made to make certain that there are no high resistance joints or
spurious conducting paths.
Always use the correct application tools as specified in the Data
Sheet / Catalog. Do not permit untrained personnel to wire,
assemble or tamper with connectors. For operation voltage please
see appropriate national regulations.
Important general information
(i) Air and creepage paths/Operating voltage. The admissible
operating
voltages depend on the individual applications and the
valid national and other applicable safety regulations.
For this reason the air and creepage path data are only reference
values. Observe reduction of air and creepage paths due to PC
board and/or harnessing.
(ii) Temperature. All information given are temperature limits.
The operation temperature depends on the individual application.
(iii) Other important information. Cannon continuously endeavors
to improve their products. Therefore, Cannon products may
deviate from the description, technical data and shape as shown
in this catalog and data sheets.
This note must be read in conjunction with the Product
Data Sheet / Catalog. Failure to observe the advice in
this
information sheet and the operating conditions
specified in the Product Data Sheet/ Catalog could
result in hazardous situations.
49www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Notes
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
50 www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Notes
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
_____________________________________________________________________________________________________________________
51www.ittcannon.com
This document solely applies to European manufactured CA Threaded products
Dimensions shown in mm | Specifications and dimensions subject to change
Amazing things
happen when great
things connect
© 2020 ITT Inc.
ITT Cannon CA TH Catalog 0220
The “ITT Engineered Blocks“ symbol, “Engineered for life”, “ITT” and “Cannon“ are registered trademarks of ITT Inc.
Specification and other data are based on information available at the time of printing, and are subject to change without notice.
North America
56 Technology Drive
Irvine, CA 92618
Phone: +1.800.854.3028
Connect with your ITT Cannon representative today
or visit us at www.ittcannon.com
Europe
Italy
Corso Europa 41/43
20020 Lainate (MI) Italy
Phone: +39.02938721
Asia
Tuopandun Industrial Area, Jinda Cheng,
Xiner Village, Shajing Town, Boan District,
Shenzhen City, Guangdong Province, China 518215
Phone: +86.755.2726.7888
Germany
Cannonstrasse 1
71384 Weinstadt, Germany
Phone: +49.7151.699.0
ITT Cannon is a world leader in the design
and manufacture of highly
engineered connector
solutions for multiple end markets.
Connect with the experts
