MBR1020VL - ON SEMICONDUCTOR

June, 2018 − Rev. 2

1Publication Order Number:

MBR1020VL/D

MBR1020VL

Surface Mount Schottky

Power Rectifier

Features

•Ultra Thin Profile − Maximum Height of 1.08 mm

•High Surge Capacity

•UL Flammability 94V−0 Classification

•MSL 1

•Green Mold Compound

•These Devices are Pb−Free, Halogen Free Free and are RoHS

Compliant

Specifications

ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted)

Symbol Parameter Value Unit

VRRM Peak Repetitive Reverse Voltage 20 V

IF(AV) Average Rectified Forward Current 1.0 A

IFSM Non−Repetitive Peak Surge Current:

Surge Applied at Rated Load Conditions,

Half Wave, Single Phase, 60Hz

45 A

dv/dt Voltage Rate of Change 1000 V/ms

TJOperating Junction Temperature Range −55 to +125 °C

TSTG Storage Temperature Range −55 to +125 °C

Stresses exceeding those listed in the Maximum Ratings table may damage the

device. If any of these limits are exceeded, device functionality should not be

assumed, damage may occur and reliability may be affected.

SOD−123F

CASE 425AD

www.onsemi.com

MARKING DIAGRAM

&Y = Binary Calendar Year Coding Scheme

&Z = Assembly Plant Code

RL = Specific Device Code

&G = Single Digit Weekly Data Code

Band Indicates Cathode

ORDERING INFORMATION

See detailed ordering and shipping information on page 2 of

this data sheet.

Schottky Power Rectifier

Cathode Anode

&ZRL&G

MBR1020VL

www.onsemi.com

THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

Symbol Characteristic Value Unit

RqJA Typical Thermal Resistance, Junction−to−Ambient (Note 1) 200 °C/W

YJL Typical Thermal Characteristics, Junction−to−Lead (Note 2) 70 °C/W

1. Mounted with minimum recommended pad size, PC board FR4.

2. Mounted on a FR4 PCB, single−sided copper, with 10 cm * 10 cm copper pad area.

ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)

Symbol Parameter Conditions Min Typ Max Unit

VFInstantaneous Forward Voltage

(Note 3)

IF = 0.1 A − − 0.275 V

IF = 0.1 A, TA = 85°C− − 0.205

IF = 0.5 A − − 0.315

IF = 0.5 A, TA = 85°C− − 0.270

IF = 1.0 A − − 0.340

IF = 1.0 A, TA = 85°C− − 0.300

IRInstantaneous Reverse Current

at Rated DC Voltage (Note 3)

TA = 25°C− − 0.60 mA

TA = 85°C− − 15

Trr Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A −12.4 −ns

Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product

performance may not be indicated by the Electrical Characteristics if operated under different conditions.

3. Pulse test: pulse width = 300 ms, duty cycle < 2%

ORDERING INFORMATION

Part Number Top Mark Package Shipping†

MBR1020VL RL SOD−123F

(Pb−Free/Halogen Free)

3000 / Tape & Reel

†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging

Specifications Brochure, BRD8011/D.

MBR1020VL

www.onsemi.com

TYPICAL PERFORMANCE CHARACTERISTICS

0.0 0.1 0.2 0.3 0 5 10 15 20

Figure 1. Typical Forward Characteristics

VR, Reverse Voltage (V)

CJ, Junction Capacitance (pF)

VR, Reverse Voltage (V)

Figure 2. Typical Reverse Characteristics

, Instantaneous Forward Voltage (V)

, Instantaneous Forward

Current (A)

0.1

TJ = 25°C

TJ = 125°C

TJ = 85°C

0.50.4

0.01

0.1

100

Figure 3. Capacitance

TJ = 25°C

TJ = 125°C

TJ = 85°C

TJ = 50°C

TJ = 100°C

IR, Reverse Current (mA)

100

200

300

400

500

2 4 6 8 10 12 14 16 18 20

TJ = 25°C

SOD−123FL

CASE 425AD

ISSUE A DATE 04 AUG 201

SCALE 4:1

MECHANICAL CASE OUTLINE

PACKAGE DIMENSIONS

http://onsemi.com

October, 2002 − Rev. 0 Case Outline Number:

XXX

DOCUMENT NUMBER:

STATUS:

NEW STANDARD:

DESCRIPTION:

98AON13725G

ON SEMICONDUCTOR STANDARD

SOD−123FL

Electronic versions are uncontrolled except when

accessed directly from the Document Repository. Printed

versions are uncontrolled except when stamped

“CONTROLLED COPY” in red.

PAGE 1 OF 2

DOCUMENT NUMBER:

98AON13725G

PAGE 2 OF 2

ISSUE REVISION DATE

ORELEASED FOR PRODUCTION FROM FAIRCHILD MA02B TO ON

SEMICONDUCTOR. REQ. BY B. NG. 31 AUG 2016

ACONVERTED TO ONSEMI FORMAT AND ADDED BACKSIDE FOOT LENGTH.

REQ. BY H. ALLEN. 04 AUG 2017

August, 2017 − Rev. A Case Outline Number

425AD

ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice

to any products herein. SCILLC makes no warranty , representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All

operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights

nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications

intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should

Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, af filiates,

and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death

associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal

Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.

ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.

ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor ’s product/patent

coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.

ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability

arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.

Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,

regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or

specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer

application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not

designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification

in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized

application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and

expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such

claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This

literature is subject to all applicable copyright laws and is not for resale in any manner.

UBLICATION ORDERING INFORMATION

N. American Technical Support: 800−282−9855 Toll Free

USA/Canada

Europe, Middle East and Africa Technical Support:

Phone: 421 33 790 2910

LITERATURE FULFILLMENT:

Literature Distribution Center for ON Semiconductor

19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA

Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada

Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada

Email: orderlit@onsemi.com

ON Semiconductor Website: www.onsemi.com

Order Literature: http://www.onsemi.com/orderlit

For additional information, please contact your loc

Sales Representative

◊