SPECIFICATION
PPS-125-3.3 PPS-125-5 PPS-125-12 PPS-125-13.5 PPS-125-15 PPS-125-24 PPS-125-27 PPS-125-48
MODEL
DCVOLTAGE
RATEDCURRENT
RATEDPOWER(convection)
RATEDPOWER (18CFMFAN)
OUTPUT
VOLTAGE ADJ.RANGE
LINEREGULATION
LOADREGULATION
SETUP,RISETIME
HOLDUP TIME (Typ.)
VOLTAGERANGE
FREQUENCY RANGE
POWERFACTOR (Typ.)
EFFICIENCY (Typ.)
INPUT
INRUSHCURRENT (Typ.)
LEAKAGECURRENT
SAFETY STANDARDS
HARMONICCURRENT
EMSIMMUNITY
WORKINGTEMP.
WORKINGHUMIDITY
STORAGETEMP.,HUMIDITY
TEMP.COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
PACKING
OVERLOAD
OVERVOLTAGE
ACCURRENT
(Typ.)
3.3V 5V 12V 13.5V 15V 24V 27V 48V
20A 20A 8.5A 7.5A 6.7A 4.2A 3.8A 2.1A
0~20A
0~25A
0~20A
0~25A
0~8.5A
0~10.5A
0~7.5A
0~9.3A
0~6.7A
0~8.4A
0~4.2A
0~5.2A
0~3.8A
0~4.6A
0~2.1A
0~2.6A
66W
82.5W
100W
125W
102W
126W
101.25W
125.55W
100.5W
126W
100.8W
124.8W
102.6W
124.2W
100.8W
124.8W
100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 150mVp-p 250mVp-p
3.13~3.46V 4.75~5.25V 11.40~12.60V 12.82~14.17V 14.25~15.75V 22.80~25.20V 25.65~28.35V 45.60~50.40V
2.0% 2.0% 2.0% 2.0% 2.0% 1.0% 1.0% 1.0%
0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5%
1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0%
1000ms,30ms/230VAC2000ms,30ms/115VACatfullload
24ms/230VAC24ms/115VACatfullload
90~264VAC127~370VDC
47~63Hz
PF>0.93/230VACPF>0.98/115VACatfullload
70% 79% 80% 80% 80% 83% 83% 84%
1.2A115VAC
230VAC 0.6A
COLDSTART 24A/230VAC
<2mA /240VAC
130~160% ratedoutputpower
3.63~4.45V 5.5~6.75V 13.8~16.2V 15.5~20.25V 17.25~20.25V 27.6~32.4V 31.05~36.45V 57.6~67.2V
Protectiontype:Foldbackcurrentlimiting,recoversautomaticallyafterfaultconditionisremoved
Protectiontype: Hiccupmode,recoversautomaticallyafterfaultconditionisremoved
UL60950-1, TUVEN60950-1approved
CompliancetoEN55022(CISPR22)ClassB
Complianceto EN61000-3-2,-3
CompliancetoEN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024,lightindustrylevel,criteria A
-20~+70 (Refertooutputloadderatingcurve)
20~90%RHnon-condensing
-40~+85 ,10~95%RH
0.05%/ (0~50
10~500Hz,2G10min./1cycle,60min.eachalongX, Y,Zaxes
111.7Khrsmin.MIL-HDBK-217F(25 )
127*76.2*34.6mm(L*W*H)
0.37Kg; 36pcs/14.3Kg/0.79CUFT
1.7A
0.75A
FileName:PPS-125-SPEC2008-10-22
125WSingleOutputwithPFCFunction PPS-125 series
Universal AC input / Full range
Built-in active PFC function
Protections: Short circuit / Overload / Over voltage
PWM control and regulated
High power density 6.117W/inch
Built-in remote sense function
LED indicator for power on
100% full load burn-in test
125W with 18CFM FAN
5"x3" compact size
3 years warranty
3
Features :
WITHSTANDVOLTAGE
ISOLATIONRESISTANCE
I/P-O/P:3KVACI/P-FG:1.5KVACO/P-FG:0.5KVAC
I/P-O/P,I/P-FG,O/P-FG:100MOhms/500VDC /25 /70%RH
SAFETY &
EMC
(Note4)
PROTECTION
ENVIRONMENT
EMICONDUCTION&RADIATION
CURRENTRANGE(convection)
CURRENTRANGE(18CFMFAN)
RIPPLE&NOISE(max.) Note.2
VOLTAGETOLERANCE Note.3
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Heat Sink HS1,HS2 & HS3 can not be shorted.
http://store.iiic.cc/