ATC 800 E Series
NPO Ceramic
High RF Power Multilayer
Capacitors
 
 
 
 
 
 
ATC’s 800 E Series offers superb performance in demanding high RF
power applications requiring consistent and reliable operation. The
combination of highly conductive metal electrode systems, optimized case
geometries, and proprietary dielectrics, yields the lowest ESR. ATC’s new
NPO low loss rugged dielectrics are designed to provide superior heat
transfer in high RF power applications. Ultra-low ESR and superior thermal
performance insure that the 800 E Series products are your best choice for
high RF power applications from VHF through microwave frequencies.
Typical functional applications: Bypass, Coupling, Tuning, Impedance
Matching and DC Blocking
Typical circuit applications: HF/RF Power Amplifiers, Transmitters, Antenna
Tuning, Plasma Chambers and Medical (MRI coils).
ENVIRONMENTAL TESTS
ATC 800 E Series Capacitors are designed and manufactured to
meet and exceed the requirements of EIA-198, MIL-PRF-55681 and
MIL-PRF-123.

MIL-STD-202, Method 107, Condition A

MIL-STD-202, Method 106

MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while
subjected to an environment of 85°C with 85% relative humidity for 240
hours min.

MIL-STD-202, Method 108, for 2000 hours, at 125°C.
Voltage applied.
120% of WVDC for capacitors rated at 1250 volts DC or less.
100% of WVDC for capacitors rated above 1250 volts DC
ELECTRICAL AND MECHANICAL
SPECIFICATIONS

Greater than 5,000 (3.3 pF to 1000 pF) @ 1 MHz.
Greater than 5,000 (1100 pF to 5100 pF) @ 1 KHz.

0 ±30 PPM/°C (-55°C to +125°C)

105 Megohms min. @ +25°C at rated WVDC
104 Megohms min. @ +125°C at rated WVDC
Max. test voltage is 500 VDC.

See Capacitance Values Table, page 2

150% of WVDC for capacitors rated above 500 volts DC and ≤1250 volts
DC for 5 seconds.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds..
 Less than ±(0.02% or 0.02 pF), whichever is greater
 None
 None
(No capacitance variation with voltage or pressure)
 ±(0.02% or 0.02 pF), whichever is greater

From -55°C to +125°C

See Mechanical Configurations, page 3
  Terminations for chips withstand a pull of 10 lbs.
min., 25 lbs. typical, for 5 seconds in direction perpendicular to the
termination surface of the capacitor. Test per MIL-STD-202, method 211.
ATC # 001-1077 Rev. I, 10/12
ISO 9001
REGISTERED
COMPANY
2

ATC800 E 22 0 J TN 7200 X C
Series
Case Size
Capacitance Code:
First 2 significant digits for capacitance.
R=Decimal Point
Indicates number of zeros following digits Laser Marking
of capacitance in picofarads except for decimal values.
Capacitance Tolerance
WVDC
Termination Code
Packaging
C - ATC Matrix Tray (Standard)
T - Tape and Reel, 250 pc. qty.
I - Special Packaging (Consult Factory)
ATC 800 E Capacitance Values
The above part number refers to a 800 E Series (case size E) 22 pF capacitor,
J tolerance (±5%), 7200 WVDC, with TN termination (Tin Plated over Non-Magnetic Barrier Termination), laser marking and plastic Matrix Tray packaging.
For additional information and catalogs contact your ATC
representative or call direct at (631) 622-4700.
Consult factory for additional performance data.
ATC accepts orders for our parts using designations with or without the
“ATC” prefix. Both methods of defining the part number are equivalent, i.e.,
part numbers referenced with the “ATC” prefix are interchangeable to parts
referenced without the “ATC” prefix. Customers are free to use either in
specifying or procuring parts from American Technical Ceramics.
AMERICAN TECHNICAL CERAMICS
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6830410 • sales@atceramics-europe.com 86-755-2396-8759 • sales@atceramics-asia.com
www.atceramics.com

Code B C D F G JK
Tol. ±0.1 pF ±0.25 pF ±0.5 pF ±1% ±2% ±5% ±10%



   


   


  
3R3 3.3
B, C, D
7200
360 36
F, G, J, K
7200
391 390
F, G, J, K
3600
3R6 3.6 390 39 431 430
3R9
3.9 430 43 471 470
4R3 4.3 470 47 511 510
4R7 4.7 510 51 561 560
5R1 5.1 560 56 621 620
2500
5R6 5.6 620 62 681 680
6R2 6.2 680 68 751 750
6R8 6.8 750 75 821 820
7R5 7.5 820 82 911 910
8R2 8.2 910 91 102 1000
9R1 9.1 101 100 112 1100
100 10
F, G, J, K
111 110
3600
122 1200
110 11 121 120 132 1300
120 12 131 130 152 1500
130 13 151 150 162 1600
150 15 161 160 182 1800
160 16 181 180 202 2000
180 18 201 200 222 2200
200 20 221 220 242 2400
220 22 241 240 272 2700
G, J, K 1000
240 24 271 270 302 3000
270 27 301 300 332 3300
300 30 331 330 392 3900
330 33 361 360 472 4700
512 5100
1500
3
AMERICAN TECHNICAL CERAMICS
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6830410 • sales@atceramics-europe.com 86-755-2396-8759 • sales@atceramics-asia.com
www.atceramics.com
ATC 800 E Non-Magnetic Capacitors: Mechanical Configurations
Custom lead styles and lengths are available; consult factory. All leads are high purity silver attached with high temperature solder and are  compliant.
ATC 800 E Capacitors: Mechanical Configurations
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPECASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm) LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIALS
800 E TE
Solderable Nickel
Barrier L T
W
Y.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.015 -.010
(9.65
+0.38 -0.25)
.190 (4.83)
max.
.040 (1.02)
max.
RoHS Compliant
Tin Plated over
Nickel Barrier Termination
800 E MS
E
Microstrip L T
LL
WL
TL
W
.380
+.035 -.010
(9.65
+0.89
-0.25)
N/A.
High Purity
Silver Leads
LL = .750 (19.05) min.
WL = .350 ±.010
(8.89 ±0.25)
TL = .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder
800 E AR
E
Axial Ribbon
ATC
SERIES
& CASE
SIZE
ATC
TERM.
CODE
CASE SIZE
& TYPE
OUTLINES
W/T IS A
TERMINATION SURFACE
BODY DIMENSIONS
INCHES (mm) LEAD AND TERMINATION
DIMENSIONS AND MATERIALS
LENGTH
(L)
WIDTH
(W)
THICKNESS
(T)
OVERLAP
(Y) MATERIALS
800 E TN E
Non-Mag
Solderable Barrier
L T
W
Y.380
+.015 -.010
(9.65
+0.38
-0.25)
.380
+.015 -.010
(9.65
+0.38 -0.25)
.190 (4.83)
max.
.040 (1.02)
max.
RoHS Compliant
Tin Plated over
Non-Magnetic
Barrier Termination
800 E MN
E
Non-Mag Microstrip L T
LL
WL
TL
W
.380
+.035 -.010
(9.65
+0.89
-0.25)
N/A.
High Purity
Silver Leads
LL = .750 (19.05) min.
WL = .350 ±.010
(8.89 ±0.25)
TL = .010 ±.005
(0.25 ±0.13)
Leads are Attached with
High Temperature Solder.
800 E AN
E
Non-Mag
Axial Ribbon
L T
LL
WL
T
L
W
L T
LL
WL
T
L
W
800 E ESR vs. Frequency
Frequency (MHz)
ESR (MilliOhms)
1
10
100
1 10 100 1000
ESR (MilliOhms)
(Typical)
10 pF
12 pF
39 pF
47 pF
220 pF
330 pF
750 pF
5100 pF
4
AMERICAN TECHNICAL CERAMICS
ATC North America ATC Europe ATC Asia
631-622-4700 • sales@atceramics.com +46 8 6830410 • sales@atceramics-europe.com 86-755-2396-8759 • sales@atceramics-asia.com
www.atceramics.com
Normal
High Density
.205
.185
.050
.030
.325
.325 .385
.425
A Min. B Min. C Min. D Min.
Pad Size
Normal
High Density
.405
.385
.050
.030
.325
.325 .385
.425
Vertical Mount
Horizontal Mount
Case E
Vertical
Electrode Orientation
Horizontal
Electrode Orientation
B
AC
D
B
220J
220J
W
T
W
L
L
T
800E
ATC 800 E Capacitors: Suggested Mounting Pad Dimensions
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document
#001-992 Rev. B; 12/05). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATC's website at www.atceramics.
com/productnder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements
of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
© 2010 American Technical Ceramics Corp. All Rights Reserved ATC # 001-1077 Rev. I, 10/12