Dimensions in millimeters and inches
Conform to JEDEC Outline DO-204AL (DO-41)
CASE STYLE AND DIMENSIONS
Major Ratings and Characteristics
IF(AV) Rectangular 1.0 A
waveform
VRRM 100 V
IFSM @ tp = 5 µs sine 200 A
VF@
1 Apk, TJ
= 125°C 0.68 V
TJrange - 40 to 150 °C
Characteristics MBR1100 Units The MBR1100 axial leaded Schottky rectifier has been opti-
mized for very low forward voltage drop, with moderate leakage.
Typical applications are in switching power supplies, convert-
ers, free-wheeling diodes, and reverse battery protection.
Low profile, axial leaded outline
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
Very low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Description/Features
SCHOTTKY RECTIFIER 1.0 Amp
MBR1100
Bulletin PD-20587 04/01
1www.irf.com
MBR1100
Bulletin PD-20587 04/01
2www.irf.com
Part number MBR1100
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Voltage Ratings
100
IF(AV) Max. Average Forward Current 10 A 50% duty cycle @ TL = 85°C, rectangular wave form
* See Fig. 4
IFSM Max. Peak One Cycle Non-Repetitive 200 5µs Sine or 3µs Rect. pulse
Surge Current * See Fig. 6 50 10ms Sine or 6ms Rect. pulse
Absolute Maximum Ratings
Parameters Value Units Conditions
AFollowing any rated
load condition and with
rated VRRM
applied
VFM Max. Forward Voltage Drop 0.85 V @ 1A
* See Fig. 1 (1) 0.96 V @ 2A
0.68 V @ 1A
0.78 V @ 2A
IRM Max. Reverse Leakage Current 0.5 mA T J = 25 °C
* See Fig. 2 (1) 1.0 mA T J = 125 °C
CTTypical Junction Capacitance 35 pF V R = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance 8.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/ µs (Rated VR)
TJ = 25 °C
TJ = 125 °C
VR = rated VR
Parameters Value Units Conditions
Electrical Specifications
(1) Pulse Width < 300µs, Duty Cycle <2%
TJMax. Junction Temperature Range -40 to 150 °C
Tstg Max. Storage Temperature Range -40 to 150 °C
RthJL Max. Thermal Resistance Junction 80 °C/W DC operation (* See Fig. 4)
to Lead (2)
wt Approximate Weight 0.33(0.012) g (oz.)
Case Style DO-204AL(DO-41)
Thermal-Mechanical Specifications
Parameters Value Units Conditions
(2) Mounted 1 inch square PCB, Thermal Probe connected to lead 2mm from Package
MBR1100
Bulletin PD-20587 04/01
3www.irf.com
Fig. 1 - Max. Forward Voltage Drop Characteristics
Forward Voltage Drop - VFM (V)
Instantaneous Forward Current - IF (A)
Reverse Voltage - VR (V)
Reverse Voltage - VR (V)
Junction Capacitance - CT (pF)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage
Reverse Current - I R
(mA)
0
.1
1
10
0 0.4 0.8 1.2 1.6
T = 150˚C
T = 125˚C
T = 25˚C
J
J
J
0
0.0001
0.001
0.01
0.1
1
10
0 20406080100
125˚C
25˚C
T = 150˚C
J
10
100
0 20406080100
T = 25˚C
J
MBR1100
Bulletin PD-20587 04/01
4www.irf.com
Average Forward Current - I F(AV)
(A)
Square Wave Pulse Duration - t p
(microsec)
Fig. 6 - Max. Non-Repetitive Surge Current
Allowable Case Temperature (°C)
Non-Repetitive Surge Current - I FSM
(A)
Fig. 5- Forward Power Loss Characteristics
Average Power Loss (Watts)
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR
Fig. 4 - Max. Allowable Case Temperature
Vs. Average Forward Current
10
100
1000
10 100 1000 10000
At Any Rated Load Condition
And With rated Vrrm Applied
Following Surge
Average Forward Current - I F(AV)
(A)
0
20
40
60
80
100
120
140
160
0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6
DC
Square wave (D = 0.50)
80% Rated Vr applied
see note (2)
0
0.2
0.4
0.6
0.8
1
0 0.5 1 1.5
DC
RMS Limit
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
DC
MBR1100
Bulletin PD-20587 04/01
5www.irf.com
Ordering Information Table
Device Code
123
1- Schottky MBR Series
2- Current Rating: 1 = 1A
3- Voltage Rating: 100 = 100V
4- TR = Tape & Reel package (5000 pcs)
- = Box package (1000 pcs)
MBR 1 100 TR
4
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 04/01
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
