1
Subject to change without notice.
www.cree.com/xlamp
Data Sheet: CLD-DS18.005
Cree® XLamp® XP-E LEDs
Data Sheet
The XLamp XP-E LED combines the proven lighting-class performance and
reliability of the XLamp XR-E LED in a package with 80% smaller footprint.
The XLamp XP-E LED continues Cree’s history of innovation in LEDs for lighting
applications with wide viewing angle, symmetrical package, unlimited oor life
and electrically neutral thermal path.
Cree XLamp LEDs bring high performance and quality of light to a
wide range of lighting applications, including color-changing, portable
and personal, outdoor, indoor-directional, transportation, stage and studio,
commercial and emergency-vehicle lighting.
Table of Contents
Flux Characteristics (TJ = 25°C) - White ..................................................................................................... 2
Flux Characteristics (TJ = 25°C) - Color ...................................................................................................... 3
Characteristics ........................................................................................................................................ 5
Relative Spectral Power Distribution ...........................................................................................................6
Relative Flux vs. Junction Temperature (IF = 350 mA) ...................................................................................7
Electrical Characteristics (TJ = 25°C) ..........................................................................................................8
Thermal Design .......................................................................................................................................9
Relative Flux vs. Current (TJ = 25°C) ....................................................................................................... 11
Typical Spatial Distribution ...................................................................................................................... 12
Reow Soldering Characteristics .............................................................................................................. 13
Notes ................................................................................................................................................... 14
Mechanical Dimensions (TA = 25°C) ......................................................................................................... 15
Tape and Reel ....................................................................................................................................... 16
Packaging ............................................................................................................................................. 17
Label with Cree Bin Code,
Qty, Lot # ............................................................................................................................................ 17
Label with Customer Order Code, ............................................................................................................ 17
Qty, Reel ID, PO# .................................................................................................................................. 17
FEATURES
• Available in white (2,600 K to 10,000 K CCT), blue, green, amber, red & red-orange
• Maximum drive current: up to 1 A
• Low thermal resistance: as low as 9°C/W
• Maximum junction temperature: 150°C
• Wide viewing angle: 115°–130°
• Unlimited oor life at ≤ 30°C/85% RH
• Reow solderable - JEDEC J-STD-020C compatible
• Electrically neutral thermal path
• RoHS-compliant
• UL-recognized component (E326295)
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
2CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Flux Characteristics (TJ = 25°C) - White
The following table provides several base order codes for XLamp XP-E LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as a
complete description of the order-code nomenclature, please consult the XP-E & XP-C Binning and Labeling document.
Color
CCT Range
Base Order Codes
Min Luminous Flux
(lm) Order Code
Min. Max. Group Flux (lm)
Cool White 5,000 K 10,000 K
Q3 93.9 XPEWHT-L1-0000-00B01
Q4 100 XPEWHT-L1-0000-00C01
Q5 107 XPEWHT-L1-0000-00D01
R2 114 XPEWHT-L1-0000-00E01
Neutral
White 3,700 K 5,000 K
P4 80.6 XPEWHT-L1-0000-009E4
Q2 87.4 XPEWHT-L1-0000-00AE4
Q3 93.9 XPEWHT-L1-0000-00BE4
Q4 100 XPEWHT-L1-0000-00CE4
Warm
White 2,600 K 3,700 K
P2 67.2 XPEWHT-L1-0000-007E7
P3 73.9 XPEWHT-L1-0000-008E7
P4 80.6 XPEWHT-L1-0000-009E7
Q2 87.4 XPEWHT-L1-0000-00AE7
Notes:
• Cree maintains a tolerance of +/- 7% on ux and power measurements.
• Typical CRI for Cool White & Neutral White (3,700 K – 10,000 K CCT) is 75.
• Typical CRI for Warm White (2,600 K – 3,700 K CCT) is 80.
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
3CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Flux Characteristics (TJ = 25°C) - Color
The following table provides several base order codes for XLamp XP-E LEDs. It is important to note that the base order
codes listed here are a subset of the total available order codes for the product family. For more order codes, as well as
a complete description of the order-code nomenclature, please consult the XP-E & XP-C Binning and Labeling document.
Color
Dominant Wavelength Range Base Order
Codes Min
Luminous Flux
(lm) Order Code
Min. Max.
Group DWL
(nm) Group DWL
(nm) Group Flux
(lm)
Blue B3 465 B6 485
J 23.5 XPEBLU-L1-0000-00W01
K2 30.6 XPEBLU-L1-0000-00Y01
Color
Dominant Wavelength Range Base Order Codes
Min Luminous
Flux (lm) Order Code
Min. Max.
Group DWL
(nm) Group DWL
(nm) Group Flux
(lm)
Green G2 520 G4 535
P2 67.2 XPEGRN-L1-0000-00701
P3 73.9 XPEGRN-L1-0000-00801
P4 80.6 XPEGRN-L1-0000-00901
Q2 87.4 XPEGRN-L1-0000-00A01
Q3 93.9 XPEGRN-L1-0000-00B01
Q4 100 XPEGRN-L1-0000-00C01
Color
Dominant Wavelength Range Base Order Codes
Min Luminous
Flux (lm) Order Code
Min. Max.
Group DWL
(nm) Group DWL
(nm) Group Flux
(lm)
Amber A2 585 A3 595
K3 35.2 XPEAMB-L1-0000-00Z01
M2 39.8 XPEAMB-L1-0000-00201
M3 45.7 XPEAMB-L1-0000-00301
N2 51.7 XPEAMB-L1-0000-00401
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
4CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Flux Characteristics (TJ = 25°C) - Color (continued)
Color
Dominant Wavelength Range Base Order Codes
Min Luminous
Flux (lm) Order Code
Min. Max.
Group DWL
(nm) Group DWL
(nm) Group Flux
(lm)
Red-
Orange O3 610 O4 620
M3 45.7 XPERDO-L1-0000-00301
N2 51.7 XPERDO-L1-0000-00401
N3 56.8 XPERDO-L1-0000-00501
N4 62.0 XPERDO-L1-0000-00601
P2 67.2 XPERDO-L1-0000-00701
Color
Dominant Wavelength Range Base Order Codes
Min Luminous
Flux (lm) Order Code
Min. Max.
Group DWL
(nm) Group DWL
(nm) Group Flux
(lm)
Red R2 620 R3 630
K3 35.2 XPERED-L1-0000-00Z01
M2 39.8 XPERED-L1-0000-00201
M3 45.7 XPERED-L1-0000-00301
N2 51.7 XPERED-L1-0000-00401
Note: Cree maintains a tolerance of +/- 7% on ux and power measurements.
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
5CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Characteristics
Characteristics Unit Minimum Typical Maximum
Thermal Resistance, junction to solder point - white, blue °C/W 9
Thermal Resistance, junction to solder point - green °C/W 15
Thermal Resistance, junction to solder point - amber, red, red-orange °C/W 10
Viewing Angle (FWHM) - white degrees 115
Viewing Angle (FWHM) - blue, green, red, red-orange, amber degrees 130
Temperature coefcient of voltage - white mV/°C -4.0
Temperature coefcient of voltage - blue mV/°C -3.3
Temperature coefcient of voltage - green mV/°C -3.8
Temperature coefcient of voltage - red-orange, red mV/°C -1.8
Temperature coefcient of voltage - amber mV/°C -1.2
ESD Classication (HBM per Mil-Std-883D) Class 2
DC Forward Current - blue, green mA 1000
DC Forward Current - red-orange, red, white mA 700
DC Forward Current - amber mA 500
Reverse Voltage V 5
Forward Voltage (@ 350 mA) - blue, white V 3.2 3.9
Forward voltage (@ 350 mA) - green V 3.4 3.9
Forward voltage (@ 350 mA) - red-orange, red, amber V 2.1 2.5
Forward voltage (@ 500 mA) - amber V 2.3
Forward voltage (@ 700 mA) - white V 3.4
Forward voltage (@ 700 mA) - red-orange, red V 2.3
Forward Voltage (@ 1000 mA) - green V 3.8
Forward Voltage (@ 1000 mA) - blue V 3.5
LED Junction Temperature °C 150
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
6CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Relative Spectral Power Distribution
White
Color
Relative Spectral Power
XP Color Graph 1
0
20
40
60
80
100
400 450 500 550 600 650 700 750
Relative Radiant Power (%)
Wavelength (nm)
5000K -
10000K CCT
3700K -
5000K CCT
2600K -
3700K CCT
0
20
40
60
80
100
400 450 500 550 600 650 700 750
Relative Radiant Power (%)
Wavelength (nm)
Blue
Green
Amber
Red-
Orange
Relative Spectral Power
XP Color Graph 1
0
20
40
60
80
100
400 450 500 550 600 650 700 750
Relative Radiant Power (%)
Wavelength (nm)
5000K -
10000K CCT
3700K -
5000K CCT
2600K -
3700K CCT
0
20
40
60
80
100
400 450 500 550 600 650 700 750
Relative Radiant Power (%)
Wavelength (nm)
Blue
Green
Amber
Red-
Orange
Red
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
7CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Relative Flux vs. Junction Temperature (IF = 350 mA)
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
White
Blue
Green
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (°C)
Red-Orange
Amber
Red
Junction Temperature (°C)
Junction Temperature (°C)
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
8CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Electrical Characteristics (TJ = 25°C)
John,
This was graph 4, but XP royal will not be released so omit graph 4 for now. We'll release XP Royal in September and revise the data sheet again
Electrical Characteristics (Tj = 25ºC)
0
100
200
300
400
500
600
700
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Forward Current (mA)
Forward Voltage (V)
White
Red, Red
Orange
0%
10%
20%
30%
40%
50%
60%
70%
80%
90%
100%
25 50 75 100 125 150
Relative Luminous Flux
Junction Temperature (ºC)
Graph 6
Graph 7
0
100
200
300
400
500
600
700
800
900
1000
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Forward Current (mA)
Forward Voltage (V)
Blue
Green
0
100
200
300
400
500
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Forward Current (mA)
Forward Voltage (V)
Amber
Graph 6
Graph 7
0
100
200
300
400
500
600
700
800
900
1000
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Forward Current (mA)
Forward Voltage (V)
Blue
Green
0
100
200
300
400
500
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
Forward Current (mA)
Forward Voltage (V)
Amber
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
9CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Graph 8
Blue
Graph 9
Green
0
100
200
300
400
500
600
700
800
900
1000
1100
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
0
100
200
300
400
500
600
700
800
900
1000
1100
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Graph 8
Blue
Graph 9
Green
0
100
200
300
400
500
600
700
800
900
1000
1100
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
0
100
200
300
400
500
600
700
800
900
1000
1100
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Thermal Design
The maximum forward current is determined by the thermal resistance between the LED junction and ambient. It is
crucial for the end product to be designed in a manner that minimizes the thermal resistance from the solder point to
ambient in order to optimize lamp life and optical characteristics.
Blue
Green
Thermal Design
XPE
Cool White
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150
Ambient Temperature (ºC)
Maximum Current (mA)
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
White
Rj-a = 10°C/W
Rj-a = 15°C/W
Rj-a = 20°C/W
Rj-a = 20°C/W
Rj-a = 25°C/W
Rj-a = 30°C/W
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
10 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Thermal Design (continued)
Graph 10
Red, Red-Orange
Typical Spatial Distribution
Graph 11
Amber
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 20°C/W
Rj-a = 30°C/W
Rj-a = 40°C/W
0
100
200
300
400
500
600
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 20°C/W
Rj-a = 30°C/W
Rj-a = 40°C/W
Red,
Red-Orange
Amber
Graph 10
Red, Red-Orange
Typical Spatial Distribution
Graph 11
Amber
0
100
200
300
400
500
600
700
800
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 20°C/W
Rj-a = 30°C/W
Rj-a = 40°C/W
0
100
200
300
400
500
600
0 25 50 75 100 125 150
Maximum Current (mA)
Ambient Temperature (°C)
Rj-a = 20°C/W
Rj-a = 30°C/W
Rj-a = 40°C/W
Rj-a = 20°C/W
Rj-a = 30°C/W
Rj-a = 40°C/W
Rj-a = 20°C/W
Rj-a = 30°C/W
Rj-a = 40°C/W
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
11 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Relative Flux vs. Current (TJ = 25°C)
Relative Intensity vs. Current (Tj = 25ºC)
Typical Spatial Radiation Pattern
Graph 13
0
50
100
150
200
250
0 100 200 300 400 500 600 700
Relative Luminous Flux (%)
Forward Current (mA)
White
Red,
Red-
Orange
Graph 14
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux (%)
Forward Current (mA)
Blue
Green
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500
Relative Luminous Flux (%)
Forward Current (mA)
Amber
Graph 14
0
50
100
150
200
250
0 100 200 300 400 500 600 700 800 900 1000
Relative Luminous Flux (%)
Forward Current (mA)
Blue
Green
0
20
40
60
80
100
120
140
160
0 100 200 300 400 500
Relative Luminous Flux (%)
Forward Current (mA)
Amber
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
12 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Typical Spatial Distribution
0
20
40
60
80
100
120
-100 -80 -60 -40 -20 0 20 40 60 80 100
Relative Luminous Intensity (%)
Angle (°)
Red, Red-Orange, Amber
Blue, Green
White
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
13 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Reow Soldering Characteristics
In testing, Cree has found XLamp XP-E LEDs to be compatible with JEDEC J-STD-020C, using the parameters listed
below. As a general guideline, Cree recommends that users follow the recommended soldering prole provided by the
manufacturer of solder paste used.
Note that this general guideline may not apply to all PCB designs and congurations of reow soldering equipment.
Prole Feature Lead-Based Solder Lead-Free Solder
Average Ramp-Up Rate (Tsmax to Tp) 3°C/second max. 3°C/second max.
Preheat: Temperature Min (Tsmin) 100°C 150°C
Preheat: Temperature Max (Tsmax) 150°C 200°C
Preheat: Time (tsmin to tsmax) 60-120 seconds 60-180 seconds
Time Maintained Above: Temperature (TL) 183°C 217°C
Time Maintained Above: Time (tL) 60-150 seconds 60-150 seconds
Peak/Classication Temperature (Tp) 215°C 260°C
Time Within 5°C of Actual Peak Temperature (tp) 10-30 seconds 20-40 seconds
Ramp-Down Rate 6°C/second max. 6°C/second max
Time 25°C to Peak Temperature 6 minutes max. 8 minutes max.
Note: All temperatures refer to topside of the package, measured on the package body surface.
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
14 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Notes
Lumen Maintenance Projections
Based on internal long-term reliability testing, Cree projects white XLamp XP-E LEDs to maintain a mean 70% lumen
maintenance after 50,000 hours, provided the LED junction temperature is maintained at or below 90°C and ambient
air temperature is maintained at or below 85°C.
Please read the XLamp Long-Term Lumen Maintenance application note for more details on Cree’s lumen maintenance
testing and forecasting. Please read the XLamp Thermal Management application note for details on how thermal design,
ambient temperature, and drive current affect the LED junction temperature.
Moisture Sensitivity
In testing, Cree has found XLamp XP-C & XP-E LEDs to have unlimited oor life in conditions ≤30ºC / 85% relative hu-
midity (RH). Moisture testing included a 168 hour soak at 85ºC / 85% RH followed by 3 reow cycles, with visual and
electrical inspections at each stage.
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or oth-
erwise restricted materials in this product are below the maximum concentration values (also referred to as the thresh-
old limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive
2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS),
as amended through April 21, 2006.
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
15 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Mechanical Dimensions (TA = 25°C)
All measurements are ±.13 mm unless otherwise indicated.
.60
1.60
1.65
.65
2.00
3.45
3.45
.40
.60
3.20
1.20
.40
.40
3.20
(HATCHED AREA IS OPENING)
RECOMMENDED STENCIL PATTERN
RECOMMENDED PCB SOLDER PAD
3.30
3.30
1.30.50
.50
.50
.40
2.30
3.30
.50
1.30 .50
.73
2.6
Side ViewTop View Bottom View
All Measurements are .13mm unless otherwise indicated
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
16 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Tape and Reel
All dimensions in mm.
Loaded Pockets
(1,000 Lamps)
Leader
400mm (min) of
empty pockets with
at least 100mm
sealed by tape
(50 empty pockets min.)
Trailer
160mm (min) of
empty pockets
sealed with tape
(20 pockets min.)
START
END
Cathode Side
Anode Side
(denoted by + and circle)
160.0
A
A
B
2.5
±.1
SECTION A-A
SCALE 2 : 1
1.5
±.1
8.0
±.1
4.0
±.1
1.75
±.10
12.0 .0
+
.3
DETAIL B
SCALE 2 : 1
13
mm
7"
Cover Tape
Pocket Tape
User Feed Direction
User Feed Direction
Copyright © 2008-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree,
the Cree logo and XLamp are registered trademarks of Cree, Inc.
17 CLD-DS18.005
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
www.cree.com/xlamp
Packaging
All dimensions in mm.
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Desiccant
(inside bag)
Humidity Indicator
(inside bag)
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Dessicant
(inside bag)
Humidity Indicator
Card (inside bag)
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #
Label with Customer Order Code,
Qty, Reel ID, PO#
Label with Cree Bin Code,
Qty, Lot #
CREE Bin Code
& Barcode Label
Vacuum-Sealed
Moisture Barrier Bag
Label with Customer
P/N, Qty, Lot #, PO #
Label with Cree Bin
Code, Qty, Lot #
Label with Cree Bin
Code, Qty, Lot #
Vacuum-Sealed
Moisture Barrier Bag
Patent Label
Label with Customer Order
Code, Qty, Reel ID, PO #