GT10J312,GT10J312(SM)
2006-10-31
1
TOSHIBA INSULATED GATE BIPOLAR TRANSISTOR SILICON N CHANNEL IGBT
GT10J312, GT10J312(SM)
HIGH POWER SWITCHING APPLICATIONS
MOTOR CONTROL APPLICATIONS
z Third-generation IGBT
z Enhancement mode type
z High speed : tf = 0.30µs (Max.)
z Low saturation voltage : VCE (sat) = 2.7V (Max.)
z FRD included between emitter and collector
Absolute Maximum Ratings (Ta = 25°C)
CHARACTERISTIC SYMBOL RATING UNIT
Collector−Emitter Voltage VCES 600 V
Gate−Emitter Voltage VGES ±20 V
DC IC 10 A
Collector Current
1ms ICP 20 A
DC IF 10 A
Emitter−Collector Forward
Current 1ms IFM 20 A
Collector Power Dissipation
(Tc = 25°C) PC 60 W
Junction Temperature Tj 150 °C
Storage Temperature Range Tstg −55~150 °C
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e.
operating temperature/current/voltage, etc.) are within the
absolute maximum ratings.
Please design the appropriate reliability upon reviewing the
Toshiba Semiconductor Reliability Handbook (“Handling
Precautions”/Derating Concept and Methods) and individual
reliability data (i.e. reliability test report and estimated failure rate,
etc).
Equivalent Circuit Marking
Unit: mm
JEDEC ―
JEITA ―
TOSHIBA 2−10S1C
Weight: 1.5 g (typ.)
JEDEC ―
JEITA ―
TOSHIBA 2−10S2C
Weight: 1.4 g (typ.)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
10J312
Part No. (or abbreviation code)
GT10J312,GT10J312(SM)
2006-10-31
2
Electrical Characteristics (Ta = 25°C)
CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT
Gate Leakage Current IGES V
GE = ±20V, VCE = 0 ― ― ±500 nA
Collector Cut−Off Current ICES V
CE = 600V, VGE = 0 ― ― 1.0 mA
Gate−Emitter Cut−Off Voltage VGE (OFF) I
C = 1mA, VCE = 5V 5.0 ― 8.0 V
Collector−Emitter Saturation Voltage VCE (sat) I
C = 10A, VGE = 15V ― 2.1 2.7 V
Input Capacitance Cies V
CE = 20V, VGE = 0, f = 1MHz ― 720 ― pF
Rise Time tr ― 0.12 ―
Turn−On Time ton ― 0.40 ―
Fall Time tf ― 0.15 0.30
Switching Time
Turn−Off Time toff
Inductive Load
VCC = 300V, IC = 10A
VGG = ±15V, RG = 100Ω
(Note 1) ― 0.40 ―
µs
Peak Forward Voltage VF I
F = 10A, VGE = 0 ― ― 2.0 V
Reverse Recovery Time trr I
F = 10A, di / dt = −100A / µs ― ― 200 ns
Thermal Resistance (IGBT) Rth (j−c) ― ― ― 2.08 °C / W
Thermal Resistance (Diode) Rth (j−c) ― ― ― 3.76 °C / W
Note 1: Switching time measurement circuit and input / output waveforms
Switching loss measurement waveforms
GT10J312,GT10J312(SM)
2006-10-31
3
GT10J312,GT10J312(SM)
2006-10-31
4
GT10J312,GT10J312(SM)
2006-10-31
5
GT10J312,GT10J312(SM)
2006-10-31
6
GT10J312,GT10J312(SM)
2006-10-31
7
• The information contained herein is subject to change without notice.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patent or patent rights of
TOSHIBA or others.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
• TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced
and sold, under any law and regulations.
030619EAA
RESTRICTIONS ON PRODUCT USE
