Interconnect Solutions Cannon Mil-DTL 38999 Class G Space Grade Connectors Mil-DTL 38999 Class G Space Grade Series Connectors The Challenge Our traditional and longest served Space System customers approached ITT ICS regarding the deployment of Mil-DTL 38999 class G connectors meeting the Thermal Vacuum Outgassing requirements of Mil-DTL 38999. These requirements mandated "all non-metalic materials shall not release greater than 1.0% total mass loss (TML) and 0.1% collected condensable material (CVCM)." These customers new that ITT ICS historically manufactured highly capable space grade connectors but never qualified them to Mil-DTL 38999. Specific materials used in the manufacture of Cannon Mil-DTL 38999 connectors disqualified the products from the class G requirements. Grommet: Wire sealing rear grommet provides environmental sealing against harsh environments Interfacial Seal: Individual raised seal barriers around each pin contact ensure contact seal integrity Scoop Proof: Low profile contact design to prevent damage during blind mating Shielding: Superior EMI shielding provides protection up to 65dB at 10 GhZ Peripheral Seal: Seal around the connector interface to minimize compression set when connectors are mated Contact: Closed entry select contact design to assist contact mating Contacts: Standard Mil-C 39029 contacts MIL-1 81969 application tools provided Quality: Superior quality product, reliable, low cost, and military approved The ITT Solution ... Addressing the specifications of our customers, ITT ICS implemented a special potting and lubricant material to meet the TML and CVCM requirements of Mil-DTL 38999. Cannon achieved outgassing of the connectors by baking at 350 degrees for 48 hours. These changes, coupled with ICS Cannon's innovative and proven 38999 design, resulted in a low cost, Space Grade connector meeting the class G requirements of Mil-DTL 38999. www.ittcannon.com Mil-DTL 38999 Class G Space Grade Series Connectors Technical Overview Serving aviation markets since Cannon first introduced aircraft circular connectors in 1935, ICS's participation in aerospace and aviation interconnects spans over 70 years. With its pioneering first products on the DC-1 aircraft, ITT ICS now expands it Mil-C 38999 product offering to include Class G Space Grade connectors. Acknowledging our participation in the Mil-C 38999 market since 1971, ICS now grows our traditional product offering with a full range of qualified, Class G connectors. These new KJ series connectors offer all of the features and benefits of a government qualified product coupled with the time-tested assurance of Cannon quality, a product proudly know as "Cannon Plugs" for over 95 years. ITT `s Mil-DTL 38999 class G miniature connectors offer high density configurations designed and manufactured for high reliability and vacuum conditions. These interconnects represent ideal solutions for military approved products specifying government required testing. This series offers all the features of Mil-DTL 38999 while supporting a wide variety of layouts governed by the Military Standard 1560B. Mil-DTL 38999 Class G Performance Summary Temperature Range Contact Sizes Wire Accomodations Durability Coupling Corrosion Resistance Vibration EMI Shielding Thermal Vacuum Outgassing www.ittcannon.com -65 deg C (-85 deg F) to 200 deg C (392 deg F). 12 to 22D. 12 to 28 AWG. 500 cycles of mating and unmating, 250 cycles for series II with spring fingers. Series I and II Bayonet. Series III Threaded. 48 hours salt spray. Sine- up to 60 G's, series I & III at rated temperature. Random- 43.7Grms at rated temp- series III, 49.5 Grms at ambient temp- series I & III, 43.7 Grms at ambient temp- series II. EMI leakage attenuation, greater than 90dB at 100 Mhz, greater than 65dB at 10 Ghz. Shell to shell conductivity 1.0 millivolt max resistance. Total mass loss 1.0%, collected volatile condensible material 0.1% max. Mil-DTL 38999 Class G Space Grade Series Connectors ITT Part Number Nomenclature to Mil-DTL 38999 SERIES I MILITARY NOMENCLATURE MS27467 G 17 F 35 S 35 S MS SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT CONTACT STYLE MS SHELL STYLE MS27466 - Wall Mounting Receptacle MS27467 - Grounded Plug MS27468 - Jam Nut Receptacle MS27505 - Box Mounting Receptacle (back panel mounting, class E) CONTACT ARRANGEMENT Refer to Mil Standard 1560 CONTACT STYLE P - Pin Contact S - Socket Contact A - Less Pin Contact B - Less Socket Contact CLASS G- Space Grade, Environmental Resistant POLARIZATION A, B, C, D (No letter required for normal) SHELL SIZE 9, 11, 13, 15, 17, 19, 21, 23, 25 HARDWARE FINISH F - Electroless Nickel SERIES II MILITARY NOMENCLATURE MS27473 G 16 F MS SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT CONTACT STYLE MS SHELL STYLE MS27472 - Wall Mounting Receptacle MS27473 - Straight Plug MS27474 - Jam Nut Receptacle MS27484 - Grounded Plug MS27497 - Wall Mounting Receptacle (back panel mounting) CONTACT ARRANGEMENT Refer to Mil Standard 1560 CONTACT STYLE P - Pin Contact S - Socket Contact A - Less Pin Contact B - Less Socket Contact CLASS G- Space Grade, Environmental Resistant POLARIZATION A, B, C, D (No letter required for normal) SHELL SIZE 9, 11, 13, 15, 17, 19, 21, 23, 25 HARDWARE FINISH F - Electroless Nickel SERIES III MILITARY NOMENCLATURE D38999 26 G MS SHELL STYLE CLASS SHELL SIZE HARDWARE FINISH CONTACT ARRANGEMENT CONTACT STYLE POLARIZATION POSITION MS SHELL STYLE MS27466 - Wall Mounting Receptacle MS27467 - Grounded Plug MS27468 - Jam Nut Receptacle MS27505 - Box Mounting Receptacle (back panel mounting, class E) CLASS G- Space Grade, Environmental Resistant SHELL SIZE 9, 11, 13, 15, 17, 19, 21, 23, 25 HARDWARE FINISH F - Electroless Nickel www.ittcannon.com CONTACT ARRANGEMENT Refer to Mil Standard 1560 CONTACT STYLE P - Pin Contact S - Socket Contact A - Less Pin Contact B - Less Socket Contact POLARIZATION N (normal), A, B, C, D, E E 35 S N Mil-DTL 38999 Class G Space Grade Series Connectors "Cannon Plugs," Your Historical Choice for Critical Space Applications We understand the choices relevant to correctly specifying a Space Grade connector. When critiquing the market of available products, note the one company with a record spanning over 95 years in the interconnect markets; ITT ICS Cannon. Proudly boasting participation on every free world space mission, Cannon connectors have brought the universe to our doorstep through missions to the Moon, Mars, and beyond. With unparalleled quality, innovative engineering excellence, and globally deployed manufacturing capabilities, ITT ICS welcomes your critical space missions and provides an unequaled, qualified partnership to our Space customers. Product Features Benefits To Customers * Lightweight aluminum shells and copper alloy contacts * Variety of layouts as described in Mil Standard 1560 * Offering the shell styles currently provided with the standard product line * Operating temperature of -65 deg C to 200 deg C * Durability of 500 mating cycles * Available in series I, II, and III * * * * * * * www.ittcannon.com Low cost space grade connector system Proven track record for reliability and quality Military qualified Meets the performance requirements of Mil-DTL 38999 High Density Requirements Distribution inventory position Standard M39029 contacts utilized Customer Support Locations CHINA Tuopandun Industrial Area, Jinda Cheng, Xiner Village, Shajing Town, Baoan District, Shenzhen City, Guangdong, China 518125 phone: +86.755.2726.7238 fax: +86.755.2726.7515 GERMANY Cannonstrasse 1 Weinstadt, 71384 phone: +49.7151.699.0 fax: +49.7151.699.217 FRANCE 15, Boulevard Robert Thiboust Serris, France 77700 phone: +33.1.60.04.93.93 fax: +33.1.60.04.93.90 HONG KONG Units 2405-6, 24/F, ING Tower 308 Des Voeux Road Central Hong Kong phone: +852.2732.2720 fax: +852.2732.2919 ITALY Corso Europa 41/43 Lainate (MI), Italy 20020 phone: +39.02938721 fax: +39.0293872300 JAPAN 11-3, 5 Chome,Hibarigaoka, Zama-shi Kanagawa, Japan 228-0003 phone: +81.462.57.2010 fax: +81.462.57.1680 UK Jays Close, Viables Estate Basingstoke, RG22 4BA phone: +44.1256.311200 fax: +44.1256.323356 USA 666 East Dyer Road Santa Ana, CA 92705 toll free: 1.800.854.3028 phone: +1.714.557.4700 fax: +1.714.628.2142 www.ittcannon.com (c)2009 ITT Corporation. "Engineered for life" and "Cannon" are registered trademarks of ITT Corporation. Specification and other data are based on information available at the time of printing, and are subject to change without notice.