ISSI PACKAGING INFORMATION (R) Plastic TSOP-Type I Package Code: T (32-pin) 1 E H N D SEATING PLANE A S MILLIMETERS Symbol No. Leads A A1 B C D E H e L S Min. L B e A1 INCHES Max. Min. Max. 32 -- 1.20 0.05 0.25 0.17 0.23 0.12 0.17 7.90 8.10 18.30 18.50 19.80 20.20 0.50 BSC 0.40 0.60 0 8 0.25 REF -- 0.047 0.002 0.010 0.007 0.009 0.005 0.007 0.311 0.319 0.720 0.728 0.780 0.795 0.020 BSC 0.016 0.024 0 8 0.010 REF C Notes: 1. Controlling dimension: millimeters, unless otherwise specified. 2. BSC = Basic lead spacing between centers. 3. Dimensions D and E do not include mold flash protrusions and should be measured from the bottom of the package. 4. Formed leads shall be planar with respect to one another within 0.004 inches at the seating plane. Copyright (c) 2003 Integrated Silicon Solution, Inc. All rights reserved. ISSI reserves the right to make changes to this specification and its products at any time without notice. ISSI assumes no liability arising out of the application or use of any information, products or services described herein. Customers are advised to obtain the latest version of this device specification before relying on any published information and before placing orders for products. Integrated Silicon Solution, Inc. -- www.issi.com -- 1-800-379-4774 Rev. C 06/13/03