DSS 60-0045B IFAV = 60 A VRRM = 45 V VF = 0.57 V Power Schottky Rectifier VRSM VRRM V V 45 45 Type A C DSS 60-0045B TO-247 AD C A C (TAB) A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV TC = 100C; rectangular, d = 0.5 IFSM TVJ = 45C; tp = 10 ms (50 Hz), sine EAS IAS = 20 A; L = 180 H; TVJ = 25C; non repetitive IAR VA =1.5 * VRRM typ.; f=10 kHz; repetitive (dv/dt)cr Ptot TC = 25C Md mounting torque Weight typical Symbol Conditions VF A A 600 A 57 mJ 2 A 1000 TVJ TVJM Tstg IR 70 60 V/ms -55...+150 150 -55...+150 C C C 155 W 0.8...1.2 6 Nm g Features * International standard package * Very low VF * Extremely low switching losses * Low IRM-values * Epoxy meets UL 94V-0 Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Characteristic Values typ. max. TVJ = 25C VR = VRRM TVJ = 100C VR = VRRM 10 250 mA mA IF = 60 A; IF = 60 A; IF = 120 A; 0.57 0.60 0.93 V V V 0.8 K/W K/W TVJ = 125C TVJ = 25C TVJ = 125 C RthJC RthCH 0.25 Dimensions see outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2002 IXYS All rights reserved 232 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified 1-2 http://store.iiic.cc/ DSS 60-0045B 100 10000 10000 mA A pF 1000 TVJ=150C IR IF CT 125C 100 100C 10 10 TVJ = 150C 125C 25C 1000 75C 50C 1 25C 1 0.0 TVJ= 25C 100 0.1 0.2 0.6 V 0.4 0 10 20 30 Fig. 1 Maximum forward voltage drop characteristics Fig. 2 Typ. value of reverse current IR versus reverse voltage VR 45 W 40 80 A 70 d=0.5 DC 25 d= DC 0.5 0.33 0.25 0.17 0.08 40 20 30 15 20 10 10 5 0 40 80 0 120 C 160 10 20 30 TC Fig. 4 Average forward current IF(AV) versus case temperature TC 30 VR 40 V Fig. 3 Typ. junction capacitance CT versus reverse voltage VR 1000 0 0 20 A IFSM 30 50 10 10000 35 P(AV) 60 IF(AV) 0 40 V 50 VR VF 40 50 IF(AV) 60 A 100 10 100 1000 s 10000 tP Fig. 5 Forward power loss characteristics 1 K/W ZthJC D=0.5 0.33 0.25 0.17 Single Pulse 0.08 0.1 0.05 0.001 DSS 60-0045B 0.01 0.1 1s 10 t Note: All curves are per diode 232 Fig. 6 Transient thermal impedance junction to case at various duty cycles (c) 2002 IXYS All rights reserved 2-2 http://store.iiic.cc/