333 McCormick Avenue Costa Mesa, CA 92626 714-979-1900
www.semicoa.com sales@semicoa.com
Copyright 2012 Rev. 1
FEATURES
Available in JANTX and JANTXV equivalent levels
RDS(ON) < 300 mΩ
Simple Drive Requirements
Low Gate Charge
POWER MOSFET
FOR RUGGED ENVIRONMENTS
DESCRIPTION
SEMICOA’s MOSFET technology is designed for rugged environments providing excellent long term reliabil-
ity. SEMICOA’s long heritage providing military grade technology and packaging allows these devices to be
used for ground based telecommunications, vehicles, ships, weapon systems and other application where fail-
ure is not an option.
SCF2N6788T2
JANTX2N6788
JANTXV2N6788
REF: MIL-PRF-19500/555
Ease of Paralleling
Hermecally Sealed
Die Available
For footnotes refer to the last page
N-Channel
100 Volt
< 0.300 Ohms
6 Amp
ABSOLUTE MAXIMUM RATINGS
TO-205AF / TO-39
PARAMETER UNITS
lD @ VGS = 10 V, TC = 25° C Connuous Drain Current 6.0
A
lD @ VGS = 10 V, TC = 100° C Connuous Drain Current 3.5
IDM Pulsed Drain Current (1) 24
PD@ TC = 25° C Max Power Dissipaon 20 W
Linear Derang Factor 0.16 W/°C
VGS Gate to Source Voltage ±20 V
EAS Single Pulse Avalanche Energy (2) 0.242 mJ
IAR Avalanche Current (1) 2.2 A
TJ
TSTG
Operang Juncon
Storage Temperature Range
-55 to 150 °C
Lead Temperature 300 °C
Weight O.98 typical g
333 McCormick Avenue Costa Mesa, CA 92626 714-979-1900
www.semicoa.com sales@semicoa.com
Copyright 2012 Rev. 1
For Footnotes refer to the last page
SCF2N6788T2
Electrical Characteristics @ TJ 25°C (unless otherwise specific)
PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
BVDSS Drain to Source Breakdown
Voltage 100 - - V VGS = 0 V, ID = 1.0 mA
ΔBVDSS/ΔTJ Temperature Coecient of
Breakdown Voltage - 0.10 - V/°C Reference to 25 °C, ID = 1.0 mA
RDS(ON) Stac Drain to Source On-State
Resistance
- - 0.30
Ω
VGS = 10 V, ID = 3.5 A (4)
- - VGS = 10 V, ID = 6.0 A (4) 0.35
VGS(th) Gate Threshold Voltage 2.0 - 4.0 V VDS = VGS, ID = 250 µA
gsf Forward Transconductance 1.5 - - S(Ʊ) VDS = 15 V, IDS = 3.5 A (4)
IDSS Zero Gate Voltage Drain Current
- - 25
µA
VDS = 80 V, VGS = 0V
- - 250 VDS = 80 V, VGS = 0 V, Tj = 125 °C
IGSSF Gate to Source Leakage Forward 100 nA VGS = 20 V
IGSSR Gate to Source Leakage Reverse -100 nA VGS = -20 V
Qg Total Gate Charge - - 18
nC VGS = 10 V, ID = 6.0 A , VDS = 50 V Qgs Gate to Source Charge - - 4.0
Qgd Gate to Drain (Miller) Charge - - 9.0
Td(on) Turn On Delay Time - - 40
ns VDD = 35 V, ID = 6.0 A,
VGS = 10 V, RG = 7.75 Ω
Tr Rise Time - - 70
Td(o) Turn O Delay Time - - 40
Tf Fall me - - 70
CISS Input Capacitance - - -
pF VGS = 0 V, VDS = 25V, f = 1.0 MHz
COSS Output Capacitance - - -
CRSS Reverse Transfer Capacitance - - -
Source-Drain Diode Rating and Characteristics
PARMETER MIN TYP MAX UNITS TEST CONDITIONS
IS Connuous Source Current (Body Diode) - - 6.0 A
ISM Pulse Source Current (Body Diode) - - 24 A
VS
D
Diode Forward Voltage - - 1.8 V Ti = 25 °C, IS = 6.0 A, VGS = 0 V (4)
Trr Reverse Recovery Time - - 240 nS Ti = 25 °C, IF = 6.0 A, di/dt < 100 A/
µS, VDD < 50 V (4)
333 McCormick Avenue Costa Mesa, CA 92626 714-979-1900
www.semicoa.com sales@semicoa.com
Copyright 2012 Rev. 1
TO-205AF Case Outline and Dimensions
Footnotes:
1. Repeve Rang: Pulse width limited by maximum juncon temperature
2. VDD = 25 V starng TJ = 25 °C, Peak IL = 2.2 A
3. ISD ≤ 6.0 A, di/dt ≤ 110 A/µS, VDD ≤ 100 V, Tj < 150 °C, Rg = 7.75 Ω
4. Pulse width < 300 µS; Duty Cycle < 2%
Visit us at www.semicoa.com for sales and contact information.
Data and specification subject to change without notice.
SCF2N6788T2
Symbol
Dimensions
Inches Millimeters
Min Max Min Max
CD .305 .335 7.75 8.51
CH .160 .180 4.07 4.57
HD .335 .370 8.51 9.40
LC .200 typ 5.08 typ
LD .016 .021 0.41 0.53
LL .500 .750 12.70 19.05
LU .016 .019 0.41 0.48
L1 .050 1.27
L2 .250 6.35
P .100 2.54
Q .050 1.27
TL .029 .045 0.74 1.14
TW .028 .034 0.71 0.86
r .010 0.25
α 45° TP 45° TP
Pin Assignment
Lead 1 Source
Lead 2 Gate
Lead 3 Drain
