AXICOM Telecom-, Signal and RF Relays D2n V23105 Relay 108-98007 * Nov. 07 Rev A * ECOC: JM10 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Disclaimer While Tyco Electronics has made every reasonable effort to ensure the accuracy of the information in this datasheet, Tyco Electronics does not guarantee that it is error-free, nor does Tyco Electronics make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. Tyco Electronics reserves the right to make any adjustments to the information contained herein at any time without notice. Tyco Electronics expressly disclaims all implied warranties (and all express warranties, except as otherwise stated in this datasheet) regarding the information contained herein, including but not limited to any implied warranties or merchantability or fitness for a particular purpose. It is recommended that you test any new or replacement product before incorporating into a system. The dimensions in this datasheet are for reference purpose only and are subject to change without notice. Specifications are subject to change without notice. Index UL 508 File No. E 111441 Dimensions Coil Operating Range Relay Code Coil Data and Ordering Information Contact Data Insulation General Data Packing All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 5 6 7 8 9 9 10 2 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay 2 pole telecom relay, non-polarized, Through Hole Type (THT) Relay types: non-latching with 1 coil ROHS compliant (Directive 2002/95/EC) as per product date code 0418. Features * Standard DIL relay * Dimensions 20 x 10 x 11 mm, 0.795 x 0.394 x 0.433 inch * Switching and continous current 3 A * 2 changeover contacts (2 form C / DPDT) * Single contacts * Immersion cleanable * Four different coil sensitivities * (150, 200, 400, > 500 mW) * Surge voltage resistance meets FCC Part 68 requirement: 1.5 kV (10 / 700 s) between coil and contacts Typical applications * * * * * * Communications equipment Office equipment Measurement and control equipment Entertainment electronics Medical Equipment Consumer electronics All specifications subject to change. Consult Tyco Electronics for latest specifications. 3 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Dimensions Dimensions in mm THT mm inch L W H 20.2 + 0.05/-0.02 10 + 0.05/-0.02 11 + 0.1/-0.2 0.795 + 0.002/-0.0008 0.393 + 0.002/-0.0008 0.433 + 0.004/-0.008 T T1 T2 S Tw 3.1 0.3 N/A 7.62 0.15 0.55 0.5 0.122 0.011 N/A 0.3 0.005 0.021 0.020 THT Version Mounting hole layout View onto the component side of the PCB (top view) Basic grid 2.54 mm Terminal assignment Relay - top view All specifications subject to change. Consult Tyco Electronics for latest specifications. 4 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Coil Operating Range 3.0 2.6 2.6 2.0 1.8 1.6 1.4 1.2 Unom. nominal coil voltage Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 2.2 Coil Voltage [U/Unom] Coil Voltage [U/Unom] 2.2 200 mW coil 200 mW 2.8 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 1.0 3 150 mW coil 150 mW 2.8 2 1.8 1.6 1.4 1.2 Unom. nominal coil voltage 1 0.8 0.8 Uop. min. Urel. min. 0.6 0.4 0.6 Uop. min. Urel. min. 0.4 0.2 0.2 0.0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 0 100 110 120 -30 -20 -10 0 10 Ambient Temperature [C] 3.0 2.0 1.8 1.6 1.4 1.2 1.0 50 60 70 80 90 100 110 120 Unom. 0.8 550 mW coil 550 mW 2.6 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 2.2 Coil Voltage [U/Unom] Coil Voltage [U/Unom] 2.2 40 2.8 Umax. at 0 A Umax. at 2 x 1 A Umax. at 2 x 2 A 2.4 30 3.0 400 mW coil 400 mW 2.8 2.6 20 Ambient Temperature [C] 2.0 1.8 1.6 1.4 1.2 Unom. 1.0 0.8 0.6 Uop. min. Urel. min. 0.4 0.2 0.6 Uop. min. Urel. min. 0.4 0.2 0.0 0.0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 -30 Ambient Temperature [C] -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient Temperature [C] Unom = Umax. = Nominal coil voltage Upper limit of the operative range of the coil voltage (limiting voltage) when coils are continously energized Uop. min. = Lower limit of the operative range of the coil voltage (reliable operate voltage) Urel. min. = Lower limit of the operative range of the coil voltage (reliable release voltage) All specifications subject to change. Consult Tyco Electronics for latest specifications. 5 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Relay Code V 2 3 1 0 5 A 5 D2n Relay Identification Version 0 = 150 mW nominal power consumption 3 = 200 mW 4 = 400 mW 5 = 550 mW Coil number 08 = 3V 01 = 5V 02 = 6V 06 = 9V 04 = 10 V 03 = 12 V 05 = 24 V 07 = 48 V nominal voltage (only with 150/200 mW nominal coil power consumption*) nominal voltage BT 47 versions 475 = 5 V nominal voltage 479 = 10 V 476 = 12 V 477 = 24 V 478 = 48 V Contact assembly A201 = 2 changeover contacts; silver nickel, gold-plated, against silver nickel, gold-plated *) Coils with 400/500 mW nominal power consumption on request All specifications subject to change. Consult Tyco Electronics for latest specifications. 6 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Coil Data (values at 23 C) Nominal voltage Unom Vdc Operate/set voltage range Minimum voltage Umin Maximum voltage Umax Vdc Vdc Ordering Information Release/ reset voltage Minimum Coil power Coil Resistance Vdc mW / 10 % Relay code Tyco part number 150 mW nominal power consumption, non-latching 5 6 9 12 24 4.0 4.8 7.2 9.6 19.2 11.7 14.0 21.0 28.0 56 0.25 0.30 0.45 0.60 1.20 150 150 150 150 150 167 240 540 960 3840 V23105A5001A201 V23105A5002A201 V23105A5006A201 V23105A5003A201 V23105A5005A201 8-1393792-5 8-1393792-7 9-1393792-1 8-1393792-8 9-1393792-0 200 200 200 200 200 200 200 45 125 180 405 720 2880 11520 V23105A5308A201 V23105A5301A201 V23105A5302A201 V23105A5306A201 V23105A5303A201 V23105A5305A201 V23105A5307A201 1393793-5 9-1393792-3 9-1393792-5 1393793-2 9-1393792-7 9-1393792-9 1393793-3 400 400 400 400 400 400 62 90 203 360 1440 5760 V23105A5401A201 V23105A5402A201 V23105A5406A201 V23105A5403A201 V23105A5405A201 V23105A5407A201 1393793-6 1393793-7 1-1393793-0 1393793-8 1393793-9 1-1393793-1 695 515 580 515 550 575 36 70 140 280 1050 4000 V23105A5501A201 V23105A5502A201 V23105A5506A201 V23105A5503A201 V23105A5505A201 V23105A5507A201 1-1393793-6 1-1393793-8 2-1393793-3 1-1393793-9 2-1393793-1 2-1393793-4 200 mW nominal power consumption, non-latching 3 5 6 9 12 24 48 2.1 3.5 4.2 6.3 8.4 16.8 33.6 6.1 10.1 12.2 18.2 24.3 48.6 97.2 0.15 0.25 0.30 0.45 0.60 1.20 2.40 400 mW nominal power consumption, non-latching 5 6 9 12 24 48 3.5 4.2 6.3 8.4 16.8 33.6 7.2 8.6 12.9 17.2 34.3 68.6 0.25 0.30 0.42 0.60 1.20 2.40 > 500 mW nominal power consumption, non-latching 5 6 9 12 24 48 3.5 4.2 6.3 8.4 16.8 33.6 6.1 7.3 10.9 14.5 29.1 58.1 0.25 0.30 0.45 0.60 1.20 2.40 Nominal voltage Operate ing current Nomainal power consumption Resistance British Telecom Code Vdc mA Vdc mW / 10 % Relay code Tyco part number Coil versions, BT 47 type / specification T4563 C (current tested) 5 10 12 24 48 80.0 32.5 27.0 14.0 7.0 695 500 515 550 575 36 200 280 1050 4000 All specifications subject to change. Consult Tyco Electronics for latest specifications. 47 W / 5 47 W / 9 47 W / 6 47 W / 7 47 W / 8 V23105A5475A201 V23105A5479A201 V23105A5476A201 V23105A5477A201 V23105A5478A201 1-1393793-2 3-1393794-0 1-1393793-3 1-1393793-4 1-1393793-5 7 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Contact Data Number of contacts and type 2 changeover contacts Contact assembly single contacts Contact material Silver-nickel, gold-covered Limiting continuous current at max. ambient temperature 3A Maximum switching current 3A Maximum swichting voltage 220 Vdc 250 Vac Maximum switching capacity 60 W, 125 VA Thermoelectric potential < 10 V Minimum switching voltage 100 V Initial contact resistance / measuring condition: 10 mA / 20 mV Electrical endurance at 230 Vac / 0.5 A at 6 Vdc / 0.1 A at 30 Vdc / 1 A at 30 Vdc / 2 A Mechanical endurance < 100 m typ. 3.0 x 105 operations typ. 2.0 x 106 operations typ. 5.0 x 105 operations typ. 1.0 x 105 operations typ. 15.0 x 106 operations UL contact ratings 30 Vdc / 1.0 A 100 Vdc / 0.3 A 125 Vac / 0.5 A for 150 mW and 200 mW coil 125 Vac / 1.0 A for 400 mW and 500 mW coil DC Voltage [Vdc] Max. DC Load Breaking Capacity DC current [A] All specifications subject to change. Consult Tyco Electronics for latest specifications. 8 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Insulation > 109 Insulation resistance at 500 Vdc Dielectric test voltage (1 min) between coil and contacts between adjacent contact sets between open contacts 1050 Vrms 750 Vrms 750 Vrms Surge voltage resistance according to FCC 68 (10 / 700 s) between coil and contacts between adjacent contact sets between open contactss 1500 V 1500 V 1500 V High Frequency Data Capacitance between coil and contacts between adjacent contact sets between open contacts max. 4 pF max. 2 pF max. 2 pF RF Characteristics Isolation at 100 / 900 MHz Insertion loss at 100 / 900 MHz V.S.W.R. at 100 / 900 MHz -39.0 dB / -20.7 dB -0.02 dB / -0.27 dB 1.04 / 1.40 General Data Operate time at Unom typ. / max. 5 ms / 6 ms Release time without diode in parallel, typ. / max. 4 ms / 4 ms Release time with diode in parallel, typ. / max. 5 ms / 5 ms Bounce time at closing contact, typ. / max. 3 ms / 5 ms Maximum switching rate without load 50 operations/s Ambient temperature 150 and 200 mW coil 400 mW coil 500 mW coil -25 C ... +85 C -25 C ... +75 C -25 C ... +60 C < 85 K/W Thermal resistance 115 C Maximum permissible coil temperature 10 g 10 to 55 Hz Vibration resistance (function) 10 g (function) 50 g (damage) Shock resistance, half sinus, 11 ms Degree of protection / Environmental protection immersion cleanable, IP 67 / RT III Needle flame test application time 10 s Mounting position any Ultrasonic cleaning is not recommended Processing information Weight (mass) max. 6 g Terminal coating SnCu 0.7 265 C / 10 s Resistance to soldering heat All data refers to 23 C unless otherwise specified. All specifications subject to change. Consult Tyco Electronics for latest specifications. 9 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay Packing Dimensions in mm Tube for THT version 25 relays per tube 1`000 relays per box All specifications subject to change. Consult Tyco Electronics for latest specifications. 10 of 12 AXICOM Telecom-, Signal and RF Relays 108-98007 Rev A D2n V23105 Relay IM Relays D2n Relays 4th generation slim line - low profile polarized 2 c/o telecom signal relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ... 200 mW, latching relays with 1 coil 100 mW. The IM relay is available as through hole and surface mount type (J-Legs and Gull Wings) and capable to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G relay on the market. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The IM relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 10 x 6 mm board space and 5.65 mm height. 2nd generation non polarized 2 c/o relay for telecom and various other applications. Nominal voltage range from 3 ... 48 V, coil power consumption from 150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x10 mm board space and 11 mm height. P2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 140 mW, latching relays with 1 coil 70 mW. The P2 Relay is available as through hole or surface mount type and capable to switch currents up to 5 A. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The P2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. FX2 Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 coil. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW. The FX2 relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FX2 relay is tested according CECC/ IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height. FT2 / FU2 Relays P1 Relays Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a wide range of applications, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption 65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as through hole or surface mount type and capable to switch currents up to 1 A. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 13 x 7,6 mm board space and 7 mm height for THT or 8 mm height for SMT version. W11 Relays Low cost, non polarized 1 c/o relay for various applications. Nominal voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive versions 200 mW. The W11 relay is capable to switch currents up to 3 A. Dielectric strength 1000 Vrms. Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height. Reed Relays High sensitive, non polarized relay for telecom and various other applications, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ... 280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or SIL housing and capable to switch currents up to 0,5 A. Integrated diode and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimensions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or 19,8 x 5 mm board space and 7,8 mm height for SIL version. Cradle Relays 3rd generation non polarized, non latching 2 c/o telecom relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and surface mount type. Dielectric strength fulfills the Telcordia requirements according GR 1089 (2,5 kV - 2 / 10 s) and FCC part 68 (1,5 kV - 10 / 160 s). The FT2/FU2 relay is tested according CECC/IECQ and certified in accordance with IEC/EN 60950 and UL 60950. Dimensions approx. 15 x 7,5 mm board space and 10 mm height. Extremely reliable and mature relay family of 1st generation for various signal switching applications. Available as non polarized, polarized / latching and relay with AC coil. The benefit is the possibility of combining various contact sets from 1 up to 6 poles, single and bifurcated contacts, different contact materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are available as dust protected and hermetically sealed versions, with plug in or solder terminals and are capable to switch currents up to 5 A. Forcibly guided (linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from approx. 19 x 24 to 19x35 mm board space and 30 mm height. FP2 Relays Other Relays 3rd generation polarized 2 c/o telecom relay with bifurcated contacts, available as non latching or latching relay with 1 or 2 coils. Nominal voltage range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high sensitive version, 140... 300 mW for the standard version, latching relays with 1 coil 100 mW.. The FP2 Relay is available as through hole type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength fulfills FCC part 68 (1,5 kV - 10 / 160 s). The FP2 is tested according CECC/IECQ approved. Dimensions approx. 14 x 9 mm board space and 5 mm height. We offer a variety of different relay families for maintenance and replacement purposes. These relays are up to 60 years old now, such as Card Relay SN (V23030 series), Small General Purpose Relay (V23006 series), Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series). Accessories like sockets, hold down springs, etc. optional. MT2 2nd generation non polarized, non latching 2 c/o telecom and signal relay with bifurcated contacts. Nominal voltage range from 3 ... 48 V, coil power consumption 150/200/300/400 and 550 mW. Dielectric strength fulfills the requirements according FCC part 68 (1,5 kV - 10 / 160 s). Dimensions approx. 20 x 10 mm board space and 11 mm height. High Frequency Relays HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics in a small package. All HF series relays are suitable for SMD soldering processes. Available as non latching or latching versions with 1 or 2 coils and a nominal coil voltage range from 3 ... 24 V, a coil power consumption of 140 mW or 70 mW (single coil latching types). HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm. 50 W hot switching and 50 W RF power carry capability. Dimensions 14.6 x 7.3 x 10.3 mm. HF3S: High performance, high power RF relay suitable up to 3 GHz, 50 W hot switching and 150 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. HF6: High performance, high power RF relay suitable up to 6 GHz, 50 W hot switching and 50 W RF power carry capability. Dimensions 15 x 7.6 x 10.6 mm. All specifications subject to change. Consult Tyco Electronics for latest specifications. 11 of 12 Tyco Electronics Logistics AG Werk Axicom Au Seestrasse 295 CH-8804 Au-Wadenswil / Switzerland Phone +41 44 782 91 11 Fax +41 44 782 90 00 E-mail: axicom@tycoelectronics.com Tyco Electronics Paulsternstrasse 26 D-13629 Berlin / Germany Phone +49 30 386 38573 Fax +49 30 386 38575 E-mail: axicom@tycoelectronics.com Tyco Electronics EC Trutnov s.r.o. Komenskeho 821 CZ-541 01 Trutnov / Czech Republic E-mail: axicom@tycoelectronics.com AXICOM Telecom-, Signal and RF Relays Tyco Electronics Corporation POB 3608, Harrisburg, PA 17105, USA Phone +1 800-522-6752