GBU6A - GBU6M — Bridge Rectifiers
© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com
GBU6A - GBU6M Rev. C1 1
September 2011
GBU6A - GBU6M
Bridge Rectifiers
Features
Glass passivated junction
Surge overload rating: 175 amperes peak
Reliable low cost construction utilizing mold ed plastic technique.
Ideal for printed circuit board.
UL certified, UL # E326243.
Absolute Maximum Ratings * TA = 25°C unless otherwise noted
* These ratings are limiting value s ab ove which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics
* Device mounted on PCB with 0.5 x 0.5" (12 x 12 mm).
**Device mounted on Al plate with 2.6 x 1.4" x 0.06" (6,5 x 3.5 x 0.15 cm).
Electrical Characteristics TA = 25°C unless otherwise noted
Symbol Parameter Value Units
6A 6B 6D 6G 6J 6K 6M
VRRM Maximum Repetitive Reverse V oltage 50 100 200 400 600 800 1000 V
VRMS Maximum RMS Bridge Input Voltage 35 70 140 280 420 560 700 V
VRDC Reverse Voltage (Rated VR) 50 100 200 400 600 800 1000 V
IF(AV) Average Recitified Forward Current,
@ TA = 100°C6.0 A
IFSM Non-Repetitive Peak Forward Surge Current
8.3ms Single Half-Sine-Wave 175 A
TSTG Storage Temperature Range -55 to +150 °C
TJOperating Junction Temperature -55 to +150 °C
Symbol Parameter Value Units
PDPower Dissipation 12 W
RθJA Thermal Resistance, Junction to Ambient,* per leg 18.6 °C/W
RθJL Thermal Resistance, Junction to Lead,** per leg 3.1 °C/W
Symbol Parameter Value Units
VFForward Vo ltage, per element @ 6.0A 1.0 V
IRReverse Current, per element @ Rated VR
TA = 25°C
TA = 125°C5.0
500 μA
μA
I2t Rating for Fusing t < 8.35ms 127 A2s
+~~-
GBU
GBU6A - GBU6M — Bridge Rectifiers
© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com
GBU6A - GBU6M Rev. C1 2
Typical Performance Characteristics
Figure 1. Forward Current Derating Curve Figure 2. Forward Voltage C haracteristics
Figure 3. Reverse Current vs Reverse Voltage Figure 4. Non-Repetitive Surge Current
Figure 5. Total Capacitance
0 50 100 150
0
1
2
3
4
5
6
Ambient Temperature [ºC]
Average Rectified Forward Current, IF [A]
º
MOUNTED ON PC BOARD,
TA 0.5" (12.7mm) LEAD LENGTH
60Hz RESISTIVE OR I NDUCTI VE LOAD
HEAT -S INK
MOUNTING, TC
4x4x0.1 5"
CO PPER PLATE
0.7 0.8 0.9 1 1.1 1.2 1.3 1.4
0.1
1
10
100
Forward Voltage, VF [V]
Forward Current, IF [A]
T = 25 C
º
A
Puls e Width = 30 0 μ
μμ
μs
1% Duty Cycle
0 20406080100120140
0.01
0.1
1
10
Percent of Rated Peak Reverse Voltage [%]
Reverse Current, IR [mA]
T = 10 0 C
º
A
T = 25 C
º
A
12 51020 50100
0
35
70
105
140
175
Number of Cycles at 60Hz
Peak Forward Surge Current, IFSM [A]
T = 10 5 C
º
A
1 5 10 50 100
10
50
100
400
Reverse Voltage, VR [V]
Total Capacitance, CT [pF]
T = 25 C
º
A
f = 1.0 MHz
Visg = 50m Vp-p
© Fairchild Semiconductor Corporation www.fairchildsemi.com
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, ow ned by Fairchild Semiconductor and/or its global subsidiaries, and is not
intended to be an exhaustive list of all such trademarks.
2Cool¥
AccuPower¥
Auto-SPM¥
AX-CAP¥*
BitSiC®
Build it Now¥
CorePLUS¥
CorePOWER¥
CROSSVOLT¥
CTL¥
Current Transfer Logic¥
DEUXPEED®
Dual Cool™
EcoSPARK®
EfficientMax¥
ESBC¥
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series¥
FACT®
FAST®
FastvCore¥
FETBench¥
FlashWriter®*
FPS¥
F-PFS¥
FRFET®
Global Power ResourceSM
Green FPS¥
Green FPS¥ e-Series¥
Gmax¥
GTO¥
IntelliMAX¥
ISOPLANAR¥
Making Small Speakers Sound Louder
and Better™
MegaBuck¥
MICROCOUPLER¥
MicroFET¥
MicroPak¥
MicroPak2¥
MillerDrive¥
MotionMax¥
Motion-SPM¥
mWSaver¥
OptoHiT¥
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM¥
Power-SPM¥
PowerTrench®
PowerXS™
Programmable Active Droop¥
QFET®
QS¥
Quiet Series¥
RapidConfigure¥
¥
Saving our world, 1mW/W/kW at a time™
SignalWise¥
SmartMax¥
SMART START¥
SPM®
STEALTH¥
SuperFET®
SuperSOT¥-3
SuperSOT¥-6
SuperSOT¥-8
SupreMOS®
SyncFET¥
Sync-Lock™
®*
The Power Franchise
®
TinyBoost¥
TinyBuck¥
TinyCalc¥
TinyLogic®
TINYOPTO¥
TinyPower¥
TinyPWM¥
TinyWire¥
TranSiC®
TriFault Detect¥
TRUECURRENT®*
PSerDes¥
UHC®
Ultra FRFET¥
UniFET¥
VCX¥
VisualMax¥
VoltagePlus¥
XS™
* Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a)
are intended for surgical implant into the body or (b) support or
sustain life, and (c) whose failure to perform when properly used in
accordance with instructions for use provided in the labeling, can be
reasonably expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external w ebsite,
www .fairchildsemi.com, under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their
parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substa ndard performance, failed
applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselv es and our customers from the
proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild
Distributors who are listed by country on our web page cited abov e. Products customers buy either from Fairchild directly or fr om Authorized Fairchild Distributors
are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fa irchild's full range of up-to-date
technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and w ill appropriately address any warranty issues that
may arise. Fairchild will not prov ide any w arranty cov erage or other assistance for parts bought from Unauthorized Sources. Fairchild is comm itted to combat this
global problem and encourage our customers to do their part in stopping this practice by buy ing direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change
in any manner without notice.
Preliminary First Production
Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make
changes at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only. Rev. I57