SHIELD-MIDI SHIELD-MIDI MIDI SHIELD FOR DUINOMITE, PINGUINO, MAPLE, ARDUINO LIKE DEVELOPMENT BOARDS This is MIDI shield which allow Arduino like boards to receive and send MIDI messages. The shield allows directl wiring of up to 5 piezzo sensors and a keyboard (with buttons and serial resistors) making it ideal for drums project. The project is based on the open hardware design: source web site FEATURES MIDI-IN, MIDI-OUT and MIDI-THRU connectors 5 Piezzo sensors for Drum implementation Keyboard for piano implementation works with both 3.3V and 5V Arduino-like boards DOCUMENTS SHIELD-MIDI Users manual HARDWARE SHIELD-MIDI schematic in PDF format released under Creative Commons Attribution-Share Alike 3.0 United States License SHIELD-MIDI schematic and board in Eagle format released under Creative Commons Attribution-Share Alike 3.0 United States License SOFTWARE The official place for the library SHIELD-MIDI DuinoMite-Mega BASIC example for MIDI drums PIC32-PINGUINO demo example OLIMEXINO-328 demo example OLIMEXINO-STM32 demo example About | Terms & Conditions | FAQ | IRC Archive | Support | Distributors | Make a wish | Olimex (c) 1997-2013 https://www.olimex.com/Products/Duino/Shields/SHIELD-MIDI/[2/26/2013 8:44:01 AM]