QIQ0645003 Powerex, Inc., 173 Pavilion Lane, Youngwood 15697 (724) 925-7272 www.pwrx.com Low side Chopper IGBT Module 600V 450A IGBT / 600V 450A Fast Diode Description: Powerex Low side Chopper IGBT Module designed specially for customer applications. The modules are isolated for easy mounting with other components on a common heatsink. Features: Note: This chopper module is intended to be used in circuits in which no positive voltage ever appears from E2 to C2E1 Low Drive Requirement Low VCE(sat) Super Fast Diode (3) H Series 150A 600V Chips per IGBT Switch (9) H Series 100A 600V Chips per Diode Isolated Baseplate for Easy Heat Sinking Low Thermal Impedance Isolated Material: DBC Aluminum Nitride Ceramic Applications: Dim Inches Millimeters Dim Inches Millimeters A B C D E F G H J 4.25 2.44 1.14+0.04/-0.02 3.660.01 1.880.01 0.67 0.16 0.24 0.59 108.0 62.0 29+1.0/-0.5 93.00.25 48.00.25 17.0 4.0 6.0 15.0 K L M N P Q R S T 0.55 0.87 0.33 0.10 0.85 0.98 0.11 0.25 Dia. 0.6 14.0 22.0 8.5 2.5 21.5 25.0 2.8 6.5 Dia. 15.15 Preliminary Page 1 http://store.iiic.cc/ Choppers Welding Power Supplies 03/06/2008 QIQ0645003 Powerex, Inc., 173 Pavilion Lane, Youngwood 15697 (724) 925-7272 www.pwrx.com Low side Chopper IGBT Module 600V 450A IGBT / 600V 450A Fast Diode Maximum Ratings, Tj=25C unless otherwise specified Ratings Symbol QIQ0645003 Units Collector Emitter Voltage VCES 600 Volts Gate Emitter Voltage VGES 20 Volts Collector Current IC 450 Amperes Peak Collector Current ICM 900 Amperes IFM 450 Amperes Diode Forward Surge Current IFM 5400 Amperes Junction Temperature Tstg -40 to 125 C Mounting Torque, M6 Terminal Screws - 40 In-lb Mounting Torque, M6 Mounting Screws - 40 In-lb Module Weight (Typical) - 400 Grams VRMS 2000 Volts Diode Average Forward Current 180 Conduction, TC=100C V Isolation Static Electrical Characteristics, Tj=25C unless otherwise specified Characteristic Symbol Test Conditions Min. Typ. Max. Units ICES IGES VCE=VCES VGE=0V VGE=VGES VCE=0V - - 1.0 0.5 mA Gate-Emitter Threshold Voltage VGE(th) IC=45mA, VCE=10V 4.5 6.0 7.5 Volts Collector-Emitter Saturation Voltage VCE(sat) IC=450A, VGE=15V - 2.1 2.8 Volts IC=450A, VGE=15V, Tj=125C - 2.15 - Volts VCC=300V, IC=450A, VGS=15V IF=900A - 1350 - nC - 2.0 2.8 Volts Collector Cutoff Current Gate Leakage Current Total Gate Charge QG Diode Forward Voltage VFM A IF=450A - 1.7 2.2 Volts IF=300A - 1.3 - Volts Max. Units Dynamic Electrical Characteristics, Tj=25C unless otherwise specified Characteristic Symbol Test Conditions Min. Typ. Input Capacitance Cies - 45 nF Coes VGE=0V VCE=10V f=1MHz - Output Capacitance - - 15.9 nF - - 9 ns VCC=300V IC=450A VGE1=VGE2=15V RG=1.6 - - 350 ns - - 600 ns - - 350 ns - - 300 ns - - 110 ns - 2.43 - C Reverse Transfer Capacitance Cres Turn on Delay time td(on) Rise Time Turn- off Delay Time Fall Time tr td(off) tf Diode Reverse Recovery Time trr Diode Reverse Recovery Charge Qrr IF=900A diF/dt=-1800A/S Thermal and Mechanical Characteristics, Tj=25C unless otherwise specified Characteristic Thermal Resistance, Junction to Case Symbol Test Conditions Min. Typ. Max. Units RJC Per IGBT - 0.045 TBD C/W Thermal Resistance, Junction to Case RJC Per Diode - 0.05 TBD C/W Contact Thermal Resistance RCF Per Module - 0.02 - C/W Preliminary Page 2 http://store.iiic.cc/ 03/06/2008