SM6T TransilTM Datasheet - production data Complies with the following standards A K A K Unidirectional Bidirectional SMB (JEDEC DO-214AA) Features Peak pulse power: 600 W (10/1000 s) 4 kW (8/20 s) Stand-off voltage range: from 6.8 V to 220 V Unidirectional and bidirectional types Low leakage current: 0.2 A at 25 C 1 A at 85 C Operating Tj max: 150 C High power capability at Tj max.: 515 W (10/1000 s) JEDEC registered package outline IEC 61000-4-2 level 4: 15 kV (air discharge) 8 kV (contact discharge) IEC 61000-4-5 MIL STD 883G, method 3015-7: class 3B: 25 kV HBM (human body model) UL 497B, file number: QVGQ2.E136224 Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability EIA STD RS-481 and IEC 60286-3 packing IPC 7531 footprint Description The SM6T Transil series are designed to protect sensitive equipment against electrostatic discharges according to IEC 61000-4-2 and MIL STD 883, method 3015, and electrical overstress according to IEC 61000-4-4 and 5. These devices are more generally used against surges below 600 W (10/1000 s). The Planar technology makes it suitable for highend equipment and SMPS where low leakage current and high junction temperature are required to provide reliability and stability over time. SM6T are packaged in SMB (SMB footprint in accordance with IPC 7531 standard). January 2018 DocID3082 Rev 10 This is information on a product in full production. 1/11 www.st.com Characteristics 1 SM6T Characteristics Table 1: Absolute maximum ratings (Tamb = 25 C) Symbol Parameter Value PPP Peak pulse power dissipation(1) Tj initial = Tamb Unit 600 W Tstg Storage temperature range -65 to +150 C Tj Operating junction temperature range -55 to +150 C TL Maximum lead temperature for soldering during 10 s 260 C Notes: (1)For a surge greater than the maximum values, the diode will fail in short-circuit. Table 2: Thermal resistance Symbol Parameter Value Unit Rth(j-l) Junction to leads 20 C/W Rth(j-a) Junction to ambient on printed circuit on recommended pad layout 100 C/W Figure 1: Electrical characteristics - parameter definitions Figure 2: Pulse definition for electrical characteristics 2/11 DocID3082 Rev 10 SM6T Characteristics Table 3: Electrical characteristics parameter values (Tamb = 25 C, unless otherwise specified) VBR at IR(1) IRM max at VRM 10 / 1000 s VCL 25 C Order code 85 C A Min. V Typ. Max. V IPP Max. T(2) 8 / 20s RD VCL Max. Max. IPP RD Max. mA V(3) A(4) V A SM6T6V8A/CA 20 50 5.8 6.45 6.8 7.14 10 10.5 57 0.059 14.4 275 0.027 5.7 SM6T7V5A/CA 20 50 6.4 7.13 7.5 7.88 10 11.3 53 0.065 15.2 266 0.027 6.1 SM6T10A/CA 20 50 8.55 9.5 10.0 10.5 1 14.5 41 0.098 18.6 215 0.038 7.3 SM6T12A/CA 0.2 1 10.2 11.4 12 12.6 1 16.7 36 0.114 21.7 184 0.049 7.8 SM6T15A/CA 0.2 1 12.8 14.3 15 15.8 1 21.2 28 0.193 27.2 147 0.078 8.4 SM6T18A/CA 0.2 1 15.3 17.1 18 18.9 1 25.2 24 0.263 32.5 123 0.111 8.8 SM6T22A/CA 0.2 1 18.8 20.9 22 23.1 1 30.6 20 0.375 39.3 102 0.159 9.2 SM6T24A/CA 0.2 1 20.5 22.8 24 25.2 1 33.2 18 0.444 42.8 93 0.189 9.4 SM6T27A/CA 0.2 1 23.1 25.7 27 28.4 1 37.5 16 0.569 48.3 83 0.240 9.6 SM6T30A/CA 0.2 1 25.6 28.5 30 31.5 1 41.5 14.5 0.690 53.5 75 0.293 9.7 SM6T33A/CA 0.2 1 28.2 31.4 33 34.7 1 45.7 13.1 0.840 59.0 68 0.357 9.8 SM6T36A/CA 0.2 1 30.8 34.2 36 37.8 1 49.9 12 1.01 64.3 62 0.427 9.9 SM6T39A/CA 0.2 1 33.3 37.1 39 41.0 1 53.9 11.1 1.16 69.7 57 0.504 10.0 SM6T56A/CA 0.2 1 47.6 53.2 56 58.8 1 76.6 7.8 2.28 100 40 1.030 10.0 SM6T68A/CA 0.2 1 58.1 64.6 68 71.4 1 92 6.5 3.17 121 33 1.503 10.4 SM6T75A/CA 0.2 1 64.1 71.3 75 78.8 1 103 5.8 4.17 134 30 1.84 10.5 SM6T100A/CA 0.2 1 85.5 95.0 100 105 1 137 4.4 7.27 178 22.5 3.24 10.6 SM6T150A/CA 0.2 1 128 143 150 158 1 207 2.9 16.9 265 15 7.13 10.8 SM6T200A/CA 0.2 1 171 190 200 210 1 274 2.2 29.1 353 11.3 12.7 10.8 SM6T220A/CA 0.2 1 188 209 220 231 1 328 2 48.5 388 10.3 15.2 10.8 Notes: (1)Pulse (2)To (3)To 104/C test: tp < 50 ms calculate VBR or VCL versus junction temperature, use the following formulas: VBR at TJ = VBR at 25 C x (1 + T x (TJ - 25)) VCL at TJ = VCL at 25 C x (1 + T x (TJ-25)) calculate maximum clamping voltage at other surge level, use the following formula: VCLmax = VBR max + RD x IPPappli where IPPappli is the surge current in the application (4)Surge capability given for both directions for unidirectional and bidirectional types. DocID3082 Rev 10 3/11 Characteristics 1.1 SM6T Characteristics (curves) Figure 3: Peak power dissipation versus initial junction temperature Figure 4: Peak pulse power versus exponential pulse duration PPP(kW) Ppp (W) 100.0 700 Tj initial = 25 C 600 500 10.0 400 300 1.0 200 100 t P(ms) Tj (C) 0.1 1.0E-03 0 0 25 50 75 100 125 150 175 1.0E-02 1.0E-01 1.0E+00 1.0E+01 Figure 5: Clamping voltage versus peak pulse current (maximum values) I PP( A ) 1000.0 T j initial=25 C 100.0 8/20 s 10.0 10/1000 s 1 4/11 10 DocID3082 Rev 10 100 SM6T220A SM6T100A 0.1 SM6T68A SM6T30A SM6T15A SM6T6V8A 1.0 10 ms V CL(V) 1000 SM6T Characteristics Figure 6: Capacitance versus reverse applied voltage for unidirectional types (typical values) Figure 7: Capacitance versus reverse applied voltage for bidirectional types (typical values) C(pF) C(pF) 10000 10000 F=1 MHz Vosc=30 mVRMS Tj=25 C F=1 MHz Vosc=30 mVRMS Tj=25 C SM6T6V8CA SM6T6V8A 1000 1000 SM6T15CA SM6T15A SM6T30CA SM6T30A SM6T68CA 100 100 SM6T100CA SM6T68A SM6T220CA SM6T100A VR(V) SM6T220A VR(V) 10 10 1 10 100 1 1000 Figure 8: Peak forward voltage drop versus peak forward current (typical values) 10 100 1000 Figure 9: Relative variation of thermal impedance junction to ambient versus pulse duration Zth (j-a)/Rth (j-a) IFM(A) 1.00 1.0E+02 Recommended pad layout Printed circuit board FR4, copper thickness = 35 m 1.0E+01 Tj =125 C Tj =25 C 1.0E+00 0.10 1.0E-01 tp s VFM(V) 1.0E-02 0.0 0.5 1.0 1.5 2.0 2.5 3.0 0.01 1.0E-03 Figure 10: Thermal resistance junction to ambient versus copper surface under each lead 1.0E-02 1.0E-01 1.0E+00 1.0E+01 1.0E+02 1.0E+03 Figure 11: Leakage current versus junction temperature (typical values) Rth(j-a) (C/W) IR (nA) 1.E+03 110 100 (printed ci rc uit boa rd FR4, copper thic knes s = 35 m) 90 VR =VRM VRM < 10 V 1.E+02 80 70 60 1.E+01 50 40 30 VR =VRM VRM 10 V 1.E+00 20 10 0 0.0 Tj ( C) SCu(cm) 1.E-01 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 DocID3082 Rev 10 25 50 75 100 125 5/11 150 Package information 2 SM6T Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. 2.1 Case: JEDEC DO214-AA molded plastic over planar junction Terminals: solder plated, solderable per MIL-STD-750, method 2026 Polarity: for unidirectional types the band indicates cathode. Flammability: epoxy is rated UL94V-0 RoHS package SMB package information Figure 12: SMB package outline 6/11 DocID3082 Rev 10 Package information SM6T Table 4: SMB package mechanical data Dimensions Ref. Millimeters Inches Min. Max. Min. Max. A1 1.90 2.45 0.0748 0.0965 A2 0.05 0.20 0.0020 0.0079 b 1.95 2.20 0.0768 0.0867 c 0.15 0.40 0.0059 0.0157 D 3.30 3.95 0.1299 0.1556 E 5.10 5.60 0.2008 0.2205 E1 4.05 4.60 0.1594 0.1811 L 0.75 1.50 0.0295 0.0591 Figure 13: SMB recommended footprint 1.62 0.064 2.60 (0.102) Figure 14: Marking layout 1.62 0.064 Cathode bar (unidirectional devices only ) e 2.18 (0.086) x x x z y ww 5.84 (0.230) e: ECOPACK compliance XXX: Marking Z: Manufacturing location Y: Year WW: Week millimeters (inches) Note: Marking layout can vary according to assembly location. DocID3082 Rev 10 7/11 Ordering information 3 SM6T Ordering information Figure 15: Ordering information scheme SM 6 T 100 CA Package: SMB Power capability (10 / 1000 s): 600 W Stand-off voltage: VRM Type: CA : bidirectional A : unidirectional Table 5: Ordering information Order code Marking Package Weight Base qty. Delivery mode SM6TxxxA/CA(1) See Table 6: "Marking". SMB 0.11 g 2500 Tape and reel Notes: (1)Where xxx is nominal value of VBR and A or CA indicates unidirectional or bidirectional version. See Table 3: "Electrical characteristics parameter values (Tamb = 25 C, unless otherwise specified)" for list of available devices and their order codes. 8/11 DocID3082 Rev 10 Ordering information SM6T Table 6: Marking Order code Marking Order code Marking SM6T6V8A DE SM6T6V8CA LE SM6T7V5A DG SM6T7V5CA LG SM6T10A DP SM6T10CA LP SM6T12A DT SM6T12CA LT SM6T15A DX SM6T15CA LX SM6T18A EE SM6T18CA ME SM6T22A EK SM6T22CA MK SM6T24A EM SM6T24CA MM SM6T27A EP SM6T27CA MP SM6T30A ER SM6T30CA MR SM6T33A ET SM6T33CA MT SM6T36A EV SM6T36CA MV SM6T39A EX SM6T39CA MX SM6T56A FL SM6T56CA NL SM6T68A FQ SM6T68CA NQ SM6T75A FS SM6T75CA NS SM6T100A FY SM6T100CA NY SM6T150A GL SM6T150CA OL SM6T200A GU SM6T200CA OU SM6T220A GW SM6T220CA OW DocID3082 Rev 10 9/11 Revision history 4 SM6T Revision history Table 7: Document revision history 10/11 Date Revision Changes Aug-2001 4A 15-Sep-2004 5 1. Types table parameters on page 2: IRM @ Tj = 85 C condition added 2. IRM max values changed 26-Mar-2009 6 Reformatted to current standard. SMB dimensions and footprint updated. Maximum junction temperature replaced with operating junction temperature range in Table 1. 25-May-2009 7 Reformatted to current standard. Added standards compliance information on page 1. Added device SM6T56 to Table 3. Updated all characteristic curves. 17-Sep-2009 8 Document updated for low leakage current. 20-Oct-2009 9 Updated Figure 13. 10-Jan-2018 10 Updated Table 3: "Electrical characteristics parameter values (Tamb = 25 C, unless otherwise specified)". Previous update. DocID3082 Rev 10 SM6T IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2018 STMicroelectronics - All rights reserved DocID3082 Rev 10 11/11