PLTT
www.vishay.com Vishay Dale Thin Film
Revision: 08-Jul-16 2Document Number: 60082
For technical questions, contact: thinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in inches
CASE SIZE TERM L W T D E
0603 G 0.064 ± 0.006 0.032 ± 0.005 0.015 to 0.033 0.012 ± 0.005 0.015 ± 0.005
0805 G 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005
1206 G 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010
2010 G 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
2512 G 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005
ENVIRONMENTAL TESTS - MIL-PRF-55342
ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY
PERFORMANCE
Thermal Shock MIL-STD-202 method 107 Cond F, -65 °C to +150 °C ± 0.02 %
Short Time Overload MIL-PRF-55342 Para 4.8.6, 2.5x rated working voltage ± 0.01 %
Low Temperature Operation MIL-PRF-55342 Para 4.8.5, -65 °C ± 0.01 %
Resistance to Soldering Heat MIL-STD-202 method 210 ± 0.01 %
Moisture Resistance MIL-STD-202 method 106, no power applied ± 0.02 %
High Temperature Exposure MIL-PRF-55342 Para 4.8.7, at 150 °C for 100 h ± 0.02 %
Life MIL-STD-202 method 108, 25 % rated power
for 2000 h at 215 °C ± 0.50 %
TCR MIL-STD-202 method 304 ± 5 ppm/°C
ENVIRONMENTAL TESTS - AEC-Q200 PLTT0603 Case Size Only
ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY
PERFORMANCE
High temperature storage MIL-STD-202 method 108, 1000 h at 125 °C ± 0.10 %
Temperature cycling JESD22 method JA-104, 1000 cycles,
-55 °C to +155 °C ± 0.25 %
Moisture resistance MIL-STD-202 method 106, no power applied ± 0.10 %
Biased humidity MIL-STD-202 method 103, 1000 h at 85 °C,
85 % RH, 10 % rated power ± 0.20 %
Life MIL-STD-202 method 108,
1000 h at 175 °C, 50 % rated power ± 0.50 %
Mechanical shock MIL-STD-202 method 213, condition C ± 0.02 %
Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.02 %
Resistance to soldering heat MIL-STD-202 method 210, condition B ± 0.02 %
Electrostatic discharge AEC-Q200-002, human body (< 1 k: 1 kV; > 1 k: 2 kV) < 1 k: 1 kV; > 1 k: 2 kV
Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass
TCR MIL-STD-202 method 304 ± 5 ppm /°C
Die shear MIL-PRF-55342, 0.5 kg for 30 s minimun Pass
Flame retardance AEC-Q200-001 para 4.0 Pass