74AHC1GU04GW,125 - NEXPERIA

1. General description

The 74AHC1GU04 is a high-speed Si-gate CMOS device. It provides an inverting single

stage function.

2. Features

nSymmetrical output impedance

nHigh noise immunity

nLow power dissipation

nBalanced propagation delays

nESD protection:

uHBM JESD22-A114E: exceeds 2000 V

uMM JESD22-A115-A: exceeds 200 V

uCDM JESD22-C101C: exceeds 1000 V

nSpeciﬁed from −40 °C to +125 °C

3. Ordering information

4. Marking

74AHC1GU04

Inverter

Rev. 05 — 10 July 2007 Product data sheet

Table 1. Ordering information

Type number Package

Temperature range Name Description Version

74AHC1GU04GW −40 °C to +125 °C TSSOP5 plastic thin shrink small outline package;

5 leads; body width 1.25 mm SOT353-1

74AHC1GU04GV −40 °C to +125 °C SC-74A plastic surface-mounted package; 5 leads SOT753

Table 2. Marking codes

Type number Marking

74AHC1GU04GW AD

74AHC1GU04GV AU4

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 2 of 12

Nexperia 74AHC1GU04

Inverter

5. Functional diagram

6. Pinning information

6.1 Pinning

6.2 Pin description

7. Functional description

Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram

mna043

24214

mna044 mna045

Fig 4. Pin conﬁguration

74AHC1GU04

n.c. VCC

GND Y

001aaf099

Table 3. Pin description

Symbol Pin Description

n.c. 1 not connected

A 2 data input

GND 3 ground (0 V)

Y 4 data output

VCC 5 supply voltage

Table 4. Function table

H = HIGH voltage level; L = LOW voltage level

Input Output

A Y

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 3 of 12

Nexperia 74AHC1GU04

Inverter

8. Limiting values

[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

[2] For both TSSOP5 and SC-74A packages: above 87.5 °C the value of Ptot derates linearly with 4.0 mW/K.

9. Recommended operating conditions

10. Static characteristics

Table 5. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

VCC supply voltage −0.5 +7.0 V

IIK input clamping current VI<−0.5 V −20 - mA

VIinput voltage [1] −0.5 +7.0 V

IOK output clamping current VO < −0.5 V or VO>V

CC + 0.5 V - ±20 mA

IOoutput current −0.5 V < VO < VCC + 0.5 V - ±25 mA

ICC supply current - 75 mA

IGND ground current −75 - mA

Tstg storage temperature −65 +150 °C

Ptot total power dissipation Tamb = −40 °C to +125 °C[2] - 250 mW

Table 6. Recommended operating conditions

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions Min Typ Max Unit

VCC supply voltage 2.0 5.0 5.5 V

VIinput voltage 0 - 5.5 V

VOoutput voltage 0 - VCC V

Tamb ambient temperature −40 +25 +125 °C

∆t/∆V input transition rise and fall rate VCC = 3.3 V ± 0.3 V - - 100 ns/V

VCC = 5.0 V ± 0.5 V - - 20 ns/V

Table 7. Static characteristics

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

VIH HIGH-level

input voltage VCC = 2.0 V 1.7 - - 1.7 - 1.7 - V

VCC = 3.0 V 2.4 - - 2.4 - 2.4 - V

VCC = 5.5 V 4.4 - - 4.4 - 4.4 - V

VIL LOW-level

input voltage VCC = 2.0V - - 0.3 - 0.3 - 0.3 V

VCC = 3.0 V - - 0.6 - 0.6 - 0.6 V

VCC = 5.5 V - - 1.1 - 1.1 - 1.1 V

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 4 of 12

Nexperia 74AHC1GU04

Inverter

11. Dynamic characteristics

[1] tpd is the same as tPLH and tPHL.

[2] Typical values are measured at VCC = 3.3 V.

[3] Typical values are measured at VCC = 5.0 V.

[4] CPD is used to determine the dynamic power dissipation PD(µW).

PD=C

PD ×VCC2×fi+∑(CL×VCC2×fo) where:

fi= input frequency in MHz;

VOH HIGH-level

output voltage VI= VIH or VIL

IO=−50 µA; VCC = 2.0 V 1.9 2.0 - 1.9 - 1.9 - V

IO=−50 µA; VCC = 3.0 V 2.9 3.0 - 2.9 - 2.9 - V

IO=−50 µA; VCC = 4.5 V 4.4 4.5 - 4.4 - 4.4 - V

IO=−4.0 mA; VCC = 3.0 V 2.58 - - 2.48 - 2.40 - V

IO=−8.0 mA; VCC = 4.5 V 3.94 - - 3.8 - 3.70 - V

VOL LOW-level

output voltage VI= VIH or VIL

IO= 50 µA; VCC = 2.0 V - 0 0.1 - 0.1 - 0.1 V

IO= 50 µA; VCC = 3.0 V - 0 0.1 - 0.1 - 0.1 V

IO= 50 µA; VCC = 4.5 V - 0 0.1 - 0.1 - 0.1 V

IO= 4.0 mA; VCC = 3.0 V - - 0.36 - 0.44 - 0.55 V

IO= 8.0 mA; VCC = 4.5 V - - 0.36 - 0.44 - 0.55 V

IIinput leakage

current VI= 5.5 Vor GND;

VCC = 0 V to 5.5 V - - 0.1 - 1.0 - 2.0 µA

ICC supply current VI=V

CC or GND; IO=0A;

VCC = 5.5 V - - 1.0 - 10 - 40 µA

CIinput

capacitance - 1.5 10 - 10 - 10 pF

Table 7. Static characteristics

…continued

Voltages are referenced to GND (ground = 0 V).

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

Table 8. Dynamic characteristics

GND = 0 V; t

= t

≤

3.0 ns. For test circuit see Figure 6.

Symbol Parameter Conditions 25 °C−40 °C to +85 °C−40 °C to +125 °C Unit

Min Typ Max Min Max Min Max

tpd propagation

delay A to Y; see Figure 5 [1]

VCC = 3.0 V to 3.6 V [2]

CL= 15 pF - 3.4 7.1 1.0 8.5 1.0 10.0 ns

CL= 50 pF - 4.9 10.6 1.0 12.0 1.0 13.5 ns

VCC = 4.5 V to 5.5 V [3]

CL= 15 pF - 2.6 5.5 1.0 6.0 1.0 7.0 ns

CL= 50 pF - 3.6 7.0 1.0 8.0 1.0 9.0 ns

CPD power

dissipation

capacitance

per buffer;

VI= GND to VCC

[4] -14- - - - - pF

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 5 of 12

Nexperia 74AHC1GU04

Inverter

fo= output frequency in MHz;

CL= output load capacitance in pF;

VCC = supply voltage in Volts.

12. Waveforms

13. Typical transfer characteristics

VM = 0.5 ×VCC; VI = GND to VCC. Test data is given in Table 8.

Deﬁnitions for test circuit:

CL = Load capacitance including jig and probe

capacitance.

RT = Termination resistance should be equal to

output impedance Zo of the pulse generator.

Fig 5. The input (A) to output (Y) propagation delay

times Fig 6. Load circuitry for switching times

mna046

A input

Y output

tPHL tPLH

VM(1)

VM(1) VCC

VIVO

mna034

DUT

50 pF

PULSE

GENERATOR

Fig 7. VCC = 2.0 V; IO= 0 A Fig 8. VCC = 3.0 V; IO=0 A

2.00.4 0.8 1.2 1.6

1.0

0.6

0.2

0.8

0.4

2.0

1.2

0.4

1.6

0.8

mna397

(V) ICC

(mA)

VI (V)

ID (drain current)

01 3

3.0

mna398

1.5

(V)

ICC

(mA)

ID (drain current)

VI (V)

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 6 of 12

Nexperia 74AHC1GU04

Inverter

14. Application information

Some applications are:

•Linear ampliﬁer (see Figure 12)

•In crystal oscillator design (see Figure 13)

Remark: All values given are typical unless otherwise speciﬁed.

Fig 9. VCC = 5.5 V; IO= 0 A Fig 10. Test set-up for measuring forward

transconductance gfs =∆IO/∆VI at VO is

constant

02 6

mna399

(V) VO

ICC

(mA)

VI (V)

ID (drain current)

mna050

VCC

Rbias = 560 kΩ

input

0.47 µF100 µF

output

GND

(f = 1 kHz)

Fig 11. Typical forward transconductance gfs as a function of the supply voltage at Tamb =25°C

0246

mna400

VCC (V)

gfs

(mA/V)

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 7 of 12

Nexperia 74AHC1GU04

Inverter

Maximum Vo(p-p) =V

CC −1.5 V centered at

0.5 ×VCC.

Gol = open loop gain

Gv= voltage gain

R1 ≥3kΩ,R2≤1MΩ

ZL>10kΩ; Gol = 20 (typ.)

Typical unity gain bandwidth product is 5 MHz.

C1 = 47 pF (typ.)

C2 = 22 pF (typ.)

R1 = 1 MΩ to 10 MΩ (typ.)

R2 optimum value depends on the frequency and

required stability against changes in VCC or average

minimum ICC (ICC is typically 2 mA at VCC = 3 V and

f = 1 MHz).

Fig 12. Used as a linear ampliﬁer Fig 13. Crystal oscillator conﬁguration

U04

VCC

mna052

1 µF

mna053

U04

out

C1 C2

GvGol

1R1

-------1G

+()+

---------------------------------------

–=

Table 9. External components for resonator (f < 1 MHz)

All values given are typical and must be used as an initial set-up.

Frequency R1 R2 C1 C2

10 kHz to 15.9 kHz 22 MΩ220 kΩ56 pF 20 pF

16 kHz to 24.9 kHz 22 MΩ220 kΩ56 pF 10 pF

25 kHz to 54.9 kHz 22 MΩ100 kΩ56 pF 10 pF

55 kHz to 129.9 kHz 22 MΩ100 kΩ47 pF 5 pF

130 kHz to 199.9 kHz 22 MΩ47 kΩ47 pF 5 pF

200 kHz to 349.9 kHz 22 MΩ47 kΩ47 pF 5 pF

350 kHz to 600 kHz 22 MΩ47 kΩ47 pF 5 pF

Table 10. Optimum value for R2

Frequency R2 Optimum for

3 kHz 2.0 kΩminimum required ICC

8.0 kΩminimum inﬂuence due to change in VCC

6 kHz 1.0 kΩminimum required ICC

4.7 kΩminimum inﬂuence by VCC

10 kHz 0.5 kΩminimum required ICC

2.0 kΩminimum inﬂuence by VCC

14 kHz 0.5 kΩminimum required ICC

1.0 kΩminimum inﬂuence by VCC

>14 kHz - replace R2 by C3 with a typical value of 35 pF

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 8 of 12

Nexperia 74AHC1GU04

Inverter

15. Package outline

Fig 14. Package outline SOT353-1 (TSSOP5)

UNIT A1

max. A2A3bpLHELpwyv

ceD(1) E(1) Z(1) θ

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

mm 0.1

01.0

0.8 0.30

0.15 0.25

0.08 2.25

1.85 1.35

1.15 0.65

1.3 2.25

2.0 0.60

0.15 7°

0°

0.1 0.10.30.425

DIMENSIONS (mm are the original dimensions)

Note

1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.

0.46

0.21

SOT353-1 MO-203 SC-88A 00-09-01

03-02-19

0.15

(A3)

detail X

vMA

1.5 3 mm0

scale

TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1

1.1

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 9 of 12

Nexperia 74AHC1GU04

Inverter

Fig 15. Package outline SOT753 (SC-74A)

REFERENCES

OUTLINE

VERSION EUROPEAN

PROJECTION ISSUE DATE

IEC JEDEC JEITA

SOT753 SC-74A

wBM

detail X

vMA

0 1 2 mm

scale

132

Plastic surface-mounted package; 5 leads SOT753

UNIT A1bpcDEHELpQywv

mm 0.100

0.013 0.40

0.25 3.1

2.7

0.26

0.10 1.7

1.3

0.95 3.0

2.5 0.2 0.10.2

DIMENSIONS (mm are the original dimensions)

0.6

0.2 0.33

0.23

1.1

0.9

02-04-16

06-03-16

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 10 of 12

Nexperia 74AHC1GU04

Inverter

16. Abbreviations

17. Revision history

Table 11. Abbreviations

Acronym Description

CDM Charged Device Model

DUT Device Under Test

ESD ElectroStatic Discharge

HBM Human Body Model

MM Machine Model

Table 12. Revision history

Document ID Release date Data sheet status Change notice Supersedes

74AHC1GU04_5 20070710 Product data sheet - 74AHC1GU04_4

Modiﬁcations: •The format of this data sheet has been redesigned to comply with the new identity

guidelines of NXP Semiconductors.

•Legal texts have been adapted to the new company name where appropriate.

•Package SOT353 changed to SOT353-1 in Section 3 and Section 15.

•Quick reference data and Soldering sections removed.

74AHC1GU04_4 20020528 Product speciﬁcation - 74AHC1GU04_3

74AHC1GU04_3 20020215 Product speciﬁcation - 74AHC1GU04_2

74AHC1GU04_2 20010427 Product speciﬁcation - 74AHC1GU04_1

74AHC1GU04_1 19990519 Product speciﬁcation - -

74AHC1GU04_5

Product data sheet Rev. 05 — 10 July 2007 11 of 12

Nexperia 74AHC1GU04

Inverter

18. Legal information

18.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Deﬁnitions”.

[3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nexperia.com.

18.2 Deﬁnitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modiﬁcations or additions. Nexperia does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liability for the consequences of

use of such information.

Short data sheet — A short data sheet is an extract from a full data sheet

with the same product type number(s) and title. A short data sheet is intended

for quick reference only and should not be relied upon to contain detailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local Nexperia sales

ofﬁce. In case of any inconsistency or conﬂict with the short data sheet, the

full data sheet shall prevail.

18.3 Disclaimers

General — Information in this document is believed to be accurate and

reliable.However,Nexperiadoesnotgiveanyrepresentationsor

warranties, expressed or implied, as to the accuracy or completeness of such

information and shall have no liability for the consequences of use of such

information.

Right to make changes — Nexperiareservestherighttomake

changes to information published in this document, including without

limitation speciﬁcations and product descriptions, at any time and without

notice. This document supersedes and replaces all information supplied prior

to the publication hereof.

Suitability for use — Nexperia products are not designed,

authorized or warranted to be suitable for use in medical, military, aircraft,

space or life support equipment, nor in applications where failure or

malfunctionofaNexperiaproductcanreasonablybeexpectedto

result in personal injury, death or severe property or environmental damage.

Nexperia accepts no liability for inclusion and/or use of Nexperia

products in such equipment or applications and therefore

such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for illustrative purposes only. Nexperia makes no

representation or warranty that such applications will be suitable for the

speciﬁed use without further testing or modiﬁcation.

Limiting values — Stress above one or more limiting values (as deﬁned in

the Absolute Maximum Ratings System of IEC 60134) may cause permanent

damage to the device. Limiting values are stress ratings only and operation of

the device at these or any other conditions above those given in the

Characteristics sections of this document is not implied. Exposure to limiting

values for extended periods may affect device reliability.

Terms and conditions of sale — Nexperia products are sold

subject to the general terms and conditions of commercial sale, as published

at http://www.nexperia.com/proﬁle/terms, including those pertaining to warranty,

intellectual property rights infringement and limitation of liability, unless

explicitly otherwise agreed to in writing by Nexperia. In case of

any inconsistency or conﬂict between information in this document and such

terms and conditions, the latter will prevail.

No offer to sell or license — Nothing in this document may be interpreted

or construed as an offer to sell products that is open for acceptance or the

grant, conveyance or implication of any license under any copyrights, patents

or other industrial or intellectual property rights.

18.4 Trademarks

Notice: All referenced brands, product names, service names and trademarks

are the property of their respective owners.

19. Contact information

For additional information, please visit: http://www.nexperia.com

For sales ofﬁce addresses, send an email to: salesaddresses@nexperia.com

Document status[1][2] Product status[3] Deﬁnition

Objective [short] data sheet Development This document contains data from the objective speciﬁcation for product development.

Preliminary [short] data sheet Qualiﬁcation This document contains data from the preliminary speciﬁcation.

Product [short] data sheet Production This document contains the product speciﬁcation.

Nexperia 74AHC1GU04

Inverter

20. Contents

1 General description. . . . . . . . . . . . . . . . . . . . . . 1

2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 1

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

5 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2

6 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

6.1 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

6.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2

7 Functional description . . . . . . . . . . . . . . . . . . . 2

8 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

9 Recommended operating conditions. . . . . . . . 3

10 Static characteristics. . . . . . . . . . . . . . . . . . . . . 3

11 Dynamic characteristics . . . . . . . . . . . . . . . . . . 4

12 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

13 Typical transfer characteristics . . . . . . . . . . . . 5

14 Application information. . . . . . . . . . . . . . . . . . . 6

15 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

16 Abbreviations. . . . . . . . . . . . . . . . . . . . . . . . . . 10

17 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 10

18 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11

18.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11

18.2 Deﬁnitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

18.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

18.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11

19 Contact information. . . . . . . . . . . . . . . . . . . . . 11

20 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

For more information, please visit: http://www.nexperia.com

For sales office addresses, please send an email to: salesaddresses@nexperia.com

Date of release:

10 July 2007