MSP-100-24 - MEAN WELL ENTERPRISES

Universal AC input / Full range

Built-in active PFC function

High efficiency up to 90%

Withstand 300VAC surge input for 5 seconds

Protections: Short circuit / Overload / Over voltage

Protections: Over temperature (optional)

Cooling by free air convection

1U low profile 38mm

Medical safety approved (MOOP level)

Built-in remote ON-OFF control

No load power consumption<0.5W

All using 105 long life electrolytic capacitors℃

5 years warranty

SPECIFICATION

MSP-100-3.3 MSP-100-5 MSP-100-7.5 MSP-100-12 MSP-100-15 MSP-100-24 MSP-100-36 MSP-100-48

MODEL

DC VOLTAGE

RATED CURRENT

CURRENT RANGE

RATED POWER

RIPPLE & NOISE (max.) Note.2

OUTPUT VOLTAGE ADJ. RANGE

VOLTAGE TOLERANCE Note.3

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE Note.5

FREQUENCY RANGE

POWER FACTOR (Typ.)

EFFICIENCY (Typ.)

INPUT

ENVIRONMENT

INRUSH CURRENT (Typ.)

LEAKAGE CURRENT Note.6

OVER TEMPERATURE

SAFETY STANDARDS

SAFETY &

EMC

(Note 4)

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

WORKING TEMP.

REMOTE CONTROL

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

MTBF

DIMENSIONOTHERS

NOTE

PACKING

OVERLOAD

OVER VOLTAGE

PROTECTION

AC CURRENT (Typ.)

3.3V 5V 7.5V 12V 15V 24V 36V 48V

20A 17A 13.5A 8.5A 7A 4.5A 2.9A 2.2A

0 ~ 20A 0 ~ 17A 0 ~ 13.5A 0 ~ 8.5A 0 ~ 7A 0 ~ 4.5A 0 ~ 2.9A 0 ~ 2.2A

66W 85W 101.3W 102W 105W 108W 104.4W 105.6W

80mVp-p 80mVp-p 100mVp-p 120mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p

3.1 ~ 3.8V 4.75 ~ 5.8V 7.1 ~ 9V 11.4 ~ 13.8V 14.25 ~ 18V 22.8 ~ 28.8V 34.2 ~ 39.6V 45.6 ~ 55.2V

±0.5% ±0.5% ±0.5% ±0.3% ±0.3% ±0.2% ±0.2% ±0.2%

±2.0% ±2.0% ±1.5% ±0.8% ±0.8% ±0.5% ±0.5% ±0.5%

2500ms, 100ms/230VAC 2500ms, 100ms/115VAC at full load

50ms/230VAC 20ms/115VAC at full load

85 ~ 264VAC 120 ~ 370VDC

47 ~ 63Hz

PF>0.95/230VAC PF>0.98/115VAC at full load

78% 83%

6 ~ 7V 9.4 ~ 10.9V 14.4 ~ 16.8V 18.8 ~ 21.8V 30 ~ 34.8V 41.4 ~ 48.6V 57.6 ~ 67.2V

84% 87.5% 88% 88.5% 89% 90%

1.2A/115VAC 0.6A/230VAC

35A/115VAC 65A/230VAC

105 ~ 135% rated output power

Protection type : Constant current limiting for Vo=50 ~ 100% of rated voltage, recovers automatically after fault condition is removed

3.96 ~ 4.62V

Protection type : Shut down o/p voltage, re-power on to recover

Shut down o/p voltage, recovers automatically after temperature goes down

I/P-O/P:4KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

-40 ~ +60 (Refer to "Derating Curve")℃

RC+/RC- : 0 ~ 0.8V= power on ; 4 ~ 10V = power off

20 ~ 90% RH non-condensing

-40 ~ +85 , 10 ~ 95% RH℃

±℃℃0.04%/ (0 ~ 50 )

10 ~ 500Hz, 5G 10min./1cycle, 60min. each along X, Y, Z axes

295.7K hrs min. MIL-HDBK-217F (25 )℃

159*97*38mm (L*W*H)

File Name:MSP-100-SPEC 2020-10-20

■ Features :

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃

2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

3. Tolerance : includes set up tolerance, line regulation and load regulation.

4. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on

a mm* mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives.360 360 For guidance on how to

perform these EMC tests, please refer to EMI testing of component power supplies. (as available on http://www.meanwell.com)

5. Derating may be needed under low input voltages. Please check the derating curve for more details.

6. Touch current was measured from primary input to DC output.

7. When the input voltage is less than 40VAC, the SPS may exhibit degradation of performance. The final product manufacturers must re-confirm this

deviation that does not affect basic safety or essential performance.

8. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

※ Product Liability Disclaimer For detailed information, please refer to： https://www.meanwell.com/serviceDisclaimer.aspx

MSP-100 series

100W Single Output Medical Type

FUNCTION

0.38Kg; 24pcs/10.1Kg/0.9CUFT

+2.5,-3.5% +2.5,-3.5% ±2.5% ±1.5% ±1.5% ±1.5% ±1.5% ±1.5%

EMC IMMUNITY

EMC EMISSION

ANSI/AAMI ES60601-1, IEC60601-1 approved

,EAC TP TC 004

Compliance to EN55011 (CISPR11) Class B, EN61000-3-2,-3, EAC TP TC 020

Compliance to EN61000-4-2,3,4,5,6,8,11, EN60601-1-2, EAC TP TC 020

Earth leakage current < 300 A/264VAC , Touch leakage current < 100 A/264VAC

μμ

ISOLATION LEVEL

Primary-Secondary: 2×MOOP, Primary-Earth: 1×MOOP, Secondary-Earth: 1×MOOP

Mechanical Specification Case No.901I Unit:mm

Terminal Pin No. Assignment

Pin No. Pin No.

4,5

6,7

Assignment Assignment

DC OUTPUT -V

DC OUTPUT +V

AC/L

AC/N

4.5

152.5

1506.5

18.5

84.5

3.5

159

22 117

28.5

ψ3.5

3.5

6-M3(Both Sides) L=6

2-M3 L=4

DETECTION

CIRCUIT

SVR1

10 max.

9.5

8.2

CN100

Remote ON/OFF (CN100) : JST B-XH or equivalent

Pin No.

Assignment

RC+

RC-

Mating Housing

JST XHP JST SXH-001T

or equivalent or equivalent

Terminal

1 2

100

100W Single Output Medical Type

Derating Curve Output Derating VS Input Voltage

AMBIENT TEMPERATURE ( )℃INPUT VOLTAGE (V) 60Hz

85 100 125 135 155 264

100

LOAD (%)

LOAD(%)

-400 10203040506070

(HORIZONTAL)

O.L.P.

O.T.P.

EMI INRUSH

ACTIVE

FILTER CURRENT

LIMITING

RECTIFIERS

PFC

I/P

PWMPFC

POWER

SWITCHING FILTER

RECTIFIERS +V

CONTROLCONTROL

O.V.P.

REMOTE

CONTROL

-V

RC+

RC-

MSP-100 series

Block Diagram

File Name:MSP-100-SPEC 2020-10-20