04-2012, Rev. 0412
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
1
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay OJT
n UL TV-5 rating
n Small size
n 4000Vrms coil to contact dielectric strength
n Sensitive coil optional
Typical applications
Consumer electronics, appliances, industrial control
Approvals
VDE 40007630, TUV R 50139166, UL E82292, CQC08001025528
Technical data of approved types on request
Contact Data
Contact arrangement 1 form A, 1 NO
Rated voltage 250VAC
Max. switching voltage 250VAC
Rated current 5A
Contact material AgSnO2
Min. recommended contact load 100mA at 5VDC
Frequency of operation 360 ops./h
Operate/release time max. 15ms/4ms
Electrical endurance
DM TV-5, 120VAC 25x103 ops.
DM 5A, 250VAC res, +85°C 10x103 ops.
LM TV-5, 120VAC 25x103 ops.
LM 5A ,250VAC res, +70°C 100x103 ops.
Contact ratings TV-5 120VAC
5A 250VAC
Mechanical endurance, DC coil 5x106 operations
Coil Data
Coil voltage range 3 to 48VDC
Operative range, IEC 61810 2
Coil insulation system according UL Class E, F
Coil versions, DC coil, OJT-LM sensitive type
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
003 3 2.25 0.15 36 250
005 5 3.75 0.25 100 250
006 6 4.5 0.3 144 250
009 9 6.75 0.45 324 250
012 12 9 0.6 576 250
024 24 18 1.2 2304 250
036 36 27 1.8 5184 250
048 48 36 2.4 9216 250
All figures are given for coil without pre-energization, at ambient temperature +23°C
Contact Data (continued)
Coil versions, DC coil, OJT-DM standard type
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC Ω±10% mW
003 3 2.1 0.15 20 450
005 5 3.5 0.25 55.6 450
006 6 4.2 0.3 80 450
009 9 6.3 0.45 180 450
012 12 8.4 0.6 320 450
024 24 16.8 1.2 1280 450
036 36 25.2 1.8 2880 450
048 48 33.6 2.4 5120 450
All figures are given for coil without pre-energization, at ambient temperature +23°C
Insulation Data
Initial dielectric strength
between open contacts 750Vrms
between contact and coil 4000Vrms
Clearance/creepage
between contact and coil ≥ 7.1mm / 7.1mm
Other Data
Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content
refer to the Product Compliance Support Center at
www.te.com/customersupport/rohssupportcenter
Ambient temperature -30°C to +85°C
Category of environmental protection
IEC 61810 RTII - dust protected
RTIII - wash tight
Shock resistance (functional) 10g
Shock resistance (destructive) 100g
Resistance to soldering heat THT
IEC 60068-2-20 RTII: 270°C/10s
RTIII: 260°C/5s
Packaging unit tray/100, Carton box/1000
422
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev.11-04)
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
Features
• Miniature size 18.2 x 10.2 x 14.7h.
• 1 Form A (SPST-NO) contact arrangement.
• Designed to meet UL, CSA, VDE, TUV requirements.
• Designed to meet 4kV dielectric between coil and contacts (OJ).
• Sensitive and standard coils available.
• Immersion cleanable, sealed version available.
OJ/OJE series
3-10 Amp Miniature,
PC Board Relay
Appliances, HVAC, Industrial Control.
UL File No. E82292
CSA File No. LR48471
VDE File No. 10080
TUV File No. R75081
Initial Insulation Resistance
Between Mutually Insulated Elements: 1,000M ohms min. @ 500VDCM.
Mechanical Data
Termination: Printed circuit terminals.
Enclosure (94V-0 Flammability Ratings):
OJ/OJE-SS: Vented (Flux-tight), plastic cover.
OJ/OJE-SH: Sealed, plastic case.
Weight: 0.32 oz (9g) approximately.
Coil Data @ 20°C
Operate Data
Must Operate Voltage:
OJ/OJE -L: 75% of nominal voltage or less.
OJ/OJE -D and -H: 70% of nominal voltage or less.
Must Release Voltage:
OJ/OJE -L: 5% of nominal voltage or more.
OJ/OJE -D and -H: 5% of nominal voltage or more.
Operate Time: OJ/OJE -L: 15 ms max.
OJ/OJE -D and -H: 10 ms max.
Release Time: 4 ms max.
Environmental Data
Temperature Range:
Operating, Class A (105°C) Insulation:
OJ/OJE-L: -30°C to +80°C
OJ/OJE-D & -H: -30°C to +60°C.
Operating, Class F (155°C) Insulation:
OJ/OJE-L: -30°C to +105°C
OJ/OJE-D and -H: -30°C to +85°C.
Vibration, Mechanical: 10 to 55 Hz., 1.5mm double amplitude
Operational: 10 to 55 Hz., 1.5mm double amplitude.
Shock, Mechanical: 1,000m/s2 (100G approximately).
Operational: 100m/s2 (10G approximately).
Operating Humidity: 20 to 85% RH. (Non-condensing).
Initial Dielectric Strength
Between Open Contacts:
OJ: 750VAC 50/60 Hz. (1 minute).
OJE: 750VAC 50/60 Hz. (1 minute).
Between Coil and Contacts:
OJ: 4,000VAC 50/60 Hz. (1 minute).
OJE: 3,000VAC 50/60 Hz. (1 minute).
Surge Voltage Between Coil and Contacts:
OJ: 10,000V (1.2/50µs).
OJE: 5,000V (1.2/50µs).
Contact Data @ 20°C
Arrangements: 1 Form A (SPST-NO).
Material: Ag, Ag Alloy.
Max. Switching Rate: 300 ops./min. (no load).
30 ops./min. (rated load).
Expected Mechanical Life: 10 million operations (no load).
Expected Electrical Life: 100,000 operations (rated load).
Minimum Load: 100mA @5VDC.
Initial Contact Resistance: 100 milliohms @ 1A,6VDC.
Coil Data
Voltage: 5 to 48VDC.
Nominal Power: OJ/OJE-LM and LMH: 200 mW.
OJ/OJE-DMand HM: 450 mW.
Coil Temperature Rise:
OJ/OJE-LM and LMH : 30°C max., at rated coil voltage.
OJ/OJE-DM and HM: 40°C max., at rated coil voltage.
Max. Coil Power: 130% of nominal.
Duty Cycle: Continuous.
Contact Ratings
Ratings: OJ/OJE-LM: 3A @ 250VAC resistive,
3A @ 28VDC resistive.
OJ/OJE-LMH: 8A @ 250VAC resistive,
8A @ 28VDC resistive.
OJ/OJE-DM: 5A @ 250VAC resistive,
5A @ 28VDC resistive.
OJ/OJE-HM: 10A @ 250VAC resistive,
10A @ 28VDC resistive.
Max. Switched Voltage: AC: 265V.
DC: 30V.
Max. Switched Power:
OJ/OJE-LM: 720VA, 90W
OJ/OJE-LMH: 1,800VA, 200W
OJ/OJE-DM: 1,200VA, 150W
OJ/OJE-HM: 2,500VA, 280W
Note: Consult factory regarding TV-5 rated models.
OJ/OJE-L Sensitive
Rated Coil Nominal Coil Must Operate Must Release
Voltage Current Resistance Voltage Voltage
(VDC) (mA) (ohms) ± 10% (VDC) (VDC)
5 40.0 125 3.75 0.25
6 33.3 180 4.50 0.30
9 22.5 400 6.75 0.45
12 16.7 720 9.00 0.60
24 8.6 2,800 18.00 1.20
OJ/OJE-D and -H Standard
Rated Coil Nominal Coil Must Operate Must Release
Voltage Current Resistance Voltage Voltage
(VDC) (mA) (ohms) ± 10% (VDC) (VDC)
5 91.0 55 3.50 0.25
6 75.0 80 4.20 0.30
9 50.0 180 6.30 0.45
12 37.5 320 8.40 0.60
24 18.8 1,280 16.80 1.20
48 9.4 5,100 33.60 2.40
Users should thoroughly review the technical data before selecting a product part
number. It is recommended that user also seek out the pertinent approvals files of
the agencies/laboratories and review them to ensure the product meets the
requirements for a given application.
Zt
04-2012, Rev. 0412
www.te.com
© 2011 Tyco Electronics Corporation,
a TE Connectivity Ltd. company
Datasheets and product specification
according to IEC 61810-1 and to be used
only together with the ‘Definitions’ section.
Datasheets and product data is subject to the
terms of the disclaimer and all chapters of
the ‘Definitions’ section, available at
http://relays.te.com/definitions
Datasheets, product data, ‘Definitions’ sec-
tion, application notes and all specifications
are subject to change.
2
OEG
General Purpose Relays
PCB Relays
Miniature PCB Relay OJT (Continued)
Product code structure Typical product code OJT -SS -1 12 LM F -WG ,000
Type
OJT Miniature PCB Relay OJT
Category of protection
SS flux proof
SH wash tight
Number of poles
1 1 pole
Coil voltage
Coil code: please refer to coil versions table (e.g. 12 = 12VDC)
Contact rating and coil power
450 mWcoil power 200mW coil power
DM 5A type, coil power 450mW LM 5A type, coil power 200mW
Insulation system designation
Blank Insulation Class E (standard) F Insulation Class F
Special type
Blank Standard WG For domestic appliances (IEC 60335-1, 4 Edition)
Suffix
,000 Standard
Product code Enclosure Coil votage Coil power Insulation Part Number
OJT-SH-112DM,000 Wash tight 12VDC 450mW Class E 1461116-1
OJT-SH-124DM,000 Wash tight 24VDC 450mW Class E 1-1461116-5
OJT-SS-103LM,000 Flux proof 3VDC 250mW Class E 1461492-1
OJT-SS-105LM,000 Flux proof 5VDC 250mW Class E 1461492-2
OJT-SS-109DM,000 Flux proof 9VDC 450mW Class E 1461116-5
OJT-SS-112DM,000 Flux proof 12VDC 450mW Class E 1-1461116-3
OJT-SS-112LM,000 Flux proof 12VDC 250mW Class E 1461492-5
OJT-SS-124LM,000 Flux proof 24VDC 250mW Class E 1461492-7
Dimensions
PCB layout
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number BOJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1 0.2 0.3 0.4 0.5 0.6 0.7
0 .1 0.2 0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0123 45 67 89 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number BOJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1 0.2 0.3 0.4 0.5 0.6 0.7
0 .1 0.2 0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0123 45 67 89 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
Terminal assignment
Bottom view on solder pins
423
Dimensions are shown for
reference purposes only.
Dimensions are in inches over
(millimeters) unless otherwise
specified.
Specifications and availability
subject to change.
www.tycoelectronics.com
Technical support:
Refer to inside back cover.
OEG
Catalog 1308242
Issued 3-03 (PDF Rev. 11-04)
Reference Data
Wiring Diagram (Bottom View)
Outline Dimensions
Ordering Information
Typical Part Number BOJE -SH -1 12 L M H F ,095
1. Basic Series:
OJ = 4kV dielectric, coil and contacts.
OJE = 3kV dielectric, coil and contacts.
2. Enclosure:
SS = Vented (Flux-tight)*, plastic cover.
SH = Sealed, plastic case.
3. Termination:
1 = 1 pole
4. Coil Voltage:
05 = 5VDC 09 = 9VDC 24 = 24VDC
06 = 6VDC 12 = 12VDC 48 = 48VDC
5. Coil Input/Contact Rating:
L = Sensitive (200mW) Coil, 3A Contacts** D = Standard (450mW) Coil, 5A Contacts
H = Standard (450mW) Coil, 10A Contacts
6. Contact Arrangement:
M = 1 Form A, SPST-NO
7. High Capacity Contact Rating Option for Sensitive Coil:
H = 8A Contacts (Only available with Coil Input/Contact Rating code "L").
8. Insulation System:
Leave Blank = Class A (105°C) F = Class F (155°C)
9. Suffix:
,000 = Standard model for enclosure code "SS" ,095 = Standard model for enclosure code "SH" Other Suffix = Custom model
* Not suitable for immersion cleaning processes.
** For higher contact rating with sensitve coil, add suffix "H" to the end of the part number as indicated in step 7 of Ordering Information.
Coil Temperature Rise Operate Time Life Expectancy
PC Board Layout (Bottom View)
12
10
8
6
4
2
0 .1 0.2 0.3 0.4 0.5 0.6 0.7
0 .1 0.2 0.3 0.4 0.5 0.6 0.7
Coil Power (W)
Coil Power (W)
Time (msec)
60
50
40
30
20
10
Temp. Rise (°C)
Release Time
Operate Time
Test relay: OJE-SH-112LMH
100
Contact Current (A)
Operation (x 10
4
)
10
1
0123 45 67 89 10
HM type, 120VAC Res.
LMH type, 250VAC Res.
LM type, 250VAC Res.
DM type, 250VAC Res.
.716 ± .02
(18.2 ± .5)
.012
(.3)
.500 ± .008
(12.70 ± .2)
.039
(1.0)
.1 ± .008
(2.54 ± .2)
.067
(1.71)
.300 ± .008
(7.62 ± .2)
.157 ± .012
(4.00 ± .3)
.401 ± .02
(10.2 ± .5)
.018 x .018
(.45 x .45)
.58 ± .02
(14.7 ± .5)
.039
(1.0)
.012
(.3)
.500 ± .004
(12.7 ± .1)
.100 ± .004
(2.54 ± .1)
.067
(1.71)
.300 ± .004
(7.6 ± .1)
4 – .05 DIA
(1.3)
OJ-SH-105HM,095
OJ-SH-112LMH,095
OJ-SH-124LMH,095
OJE-SH-105DM,095
OJE-SH-112DM,095
OJE-SH-124DM,095
Our authorized distributors are more likely to stock the following items for immediate delivery.
OJE-SH-112HM,095
OJE-SH-105LMH,095
OJE-SH-112LMH,095
OJE-SH-124LMH,095
