PLA190 Single Pole, Normally Open OptoMOS(R) Relay Parameter Blocking Voltage Load Current Max On-resistance Rating 400 150 22 Units VP mA Features Description The PLA190 is a 400V, single-pole, normally open (1-Form-A) solid state relay that uses optically coupled relay technology to provide an enhanced 5000Vrms isolation barrier between the input and output of the relay. The efficient MOSFET switches use Clare's patented OptoMOS architecture while the optically coupled output is controlled by a highly efficient GaAIAs infrared LED. * 5000Vrms Input/Output Isolation * Small 6-Pin Package * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * FCC Compatible * VDE Compatible * No EMI/RFI Generation * Machine Insertable, Wave Solderable * Surface Mount Tape & Reel Version Available Approvals * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Applications * Telecommunications * Telecom Switching * Tip/Ring Circuits * Modem Switching (Laptop, Notebook, Pocket Size) * Hook Switch * Dial Pulsing * Ground Start * Ringing Injection * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security Systems * Aerospace * Industrial Controls Part Number PLA190 PLA190S PLA190STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Control NC 1 6 2 5 3 4 Load Do Not Use Load DC-Only Configuration + Control - Control NC 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD Pb RoHS 2002/95/EC DS-PLA190-R03 ton e3 www.clare.com toff 1 PLA190 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 400 5 50 1 150 800 5000 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Input to Output Capacitance 2 Conditions Symbol Min Typ Max - IL t=10ms ILPK - - 150 250 400 ILEAK - - 22 7 1 VL=50V, f=1mHz ton toff COUT - 25 1 0.5 - IL=150mA IF=5mA VR=5V IF IF VF IR 0.4 0.9 - 0.7 1.2 - 5 1.4 10 mA mA V A - CI/O - 3 - pF IF=150mA IF=250mA VL=400VP IF=5mA, VL=10V RON www.clare.com Units mA mA A ms pF R03 PLA190 PERFORMANCE DATA* 30 15 10 5 20 15 10 0.26 0.28 0.30 0.32 0.34 Turn-On Time (ms) 0.36 0.11 Typical IF for Switch Operation (N=50, IL=150mA, TA=25C) 30 30 0.12 0.13 0.14 0.15 0.16 Turn-Off Time (ms) Device Count (N) 20 15 10 13.9 Typical Blocking Voltage Distribution (N=50, TA=25C) 15 10 5 0 0 0.25 0.35 0.45 0.55 0.65 0.75 LED Current (mA) 1.6 465 470 475 480 Blocking Voltage (VP) 1.3 IF=10mA IF=5mA 1.2 Typical Turn-On Time vs. LED Forward Current (IL=30mA, TA=25C) 0.7 0.5 0.4 0.3 0.2 20 40 60 Temperature (C) 80 Typical Turn-On Time vs. Temperature (IF=5mA, IL=80mA) 0.18 10 20 30 40 LED Forward Current (mA) Turn-Off Time (ms) Turn-On Time (ms) 0.35 0.30 -20 0 20 40 60 Temperature (C) 80 100 Typical Turn-Off Time vs. LED Forward Current (IL=30mA, TA=25C) 0.140 0.138 0.136 0.134 0 Typical Turn-Off Time vs. Temperature (IF=5mA, IL=80mA) 0.16 0.15 0.14 0.13 0.12 0.11 0.25 -40 1.28 0.142 50 0.17 0.40 1.24 1.25 1.26 1.27 LED Forward Voltage (V) 0.132 0 100 LED Current to Operate (mA) 0.45 0 10 0.144 0 -20 15 1.23 0.1 1.1 -40 20 485 Turn-Off Time (ms) 1.4 25 0 460 Turn-On Time (ms) IF=50mA IF=20mA 14.5 Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) 35 0.6 1.5 14.1 14.2 14.3 14.4 On-Resistance () 5 0.85 Typical LED Forward Voltage Drop vs. Temperature 14.0 30 20 5 10 0.17 25 25 15 0 0 0.24 20 5 5 0 Device Count (N) 25 Device Count (N) 20 Typical On-Resistance Distribution (N=50, IF=5mA, IL=150mA, TA=25C) 30 25 Device Count (N) Device Count (N) 25 LED Forward Voltage (V) Typical Turn-Off Time (N=50, IF=5mA, IL=150mA, TA=25C) Device Count (N) 30 Typical Turn-On Time (N=50, IF=5mA, IL=150mA, TA=25C) 0.10 -40 -20 0 20 40 60 Temperature (C) 80 100 10 20 30 40 LED Forward Current (mA) 50 Typical IF for Switch Operation vs. Temperature (IL=100mA) 0.65 0.60 0.55 0.50 0.45 0.40 -40 -20 0 20 40 60 Temperature (C) 80 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 PLA190 PERFORMANCE DATA* 150 17 100 16 15 14 13 50 0 -50 12 -100 11 -40 -150 -2.0 -1.5 -1.0 -20 0 20 40 60 Temperature (C) 80 100 Typical Load Current vs. Temperature DC-Only Configuration (IF=5mA) 210 200 190 180 1.5 -20 0 20 40 60 Temperature (C) 80 120 110 -40 2.0 9 480 475 470 465 460 455 450 -40 170 -40 130 490 Blocking Voltage (VP) 220 140 100 -0.5 0.0 0.5 1.0 Load Voltage (V) 485 230 150 Typical Blocking Voltage vs. Temperature 250 240 Typical Load Current vs. Temperature AC/DC Configuration (IF=5mA) 160 100 1.0 Load Current (A) Leakage Current (nA) 260 Load Current (mA) Typical Load Current vs. Load Voltage (IF=5mA, TA=25C) Load Current (mA) 18 Load Current (mA) On-Resistance () Typical On-Resistance vs. Temperature (IF=5mA, IL=100mA) -20 0 20 40 60 Temperature (C) 80 100 -20 0 20 40 60 Temperature (C) 80 100 Leakage Current vs. Temperature Measured Across Pins 5&6 (VL=400V) 8 7 6 5 4 3 -40 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve, Single Pole (IF=5mA, TA=25C) 0.8 0.6 0.4 0.2 0.0 10s 100s 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 PLA190 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PLA190 / PLA190S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PLA190 / PLA190S 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 RoHS 2002/95/EC e3 www.clare.com 5 PLA190 MECHANICAL DIMENSIONS PLA190 8.382 0.381 (0.330 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 0.127 (0.100 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 7.620 0.254 (0.300 0.010) 1.651 0.254 (0.065 0.010) 3.302 0.051 (0.130 0.002) 0.254 0.0127 (0.010 0.0005) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 0.076 (0.018 0.003) PLA190S 8.382 0.381 (0.330 0.015) 9.524 0.508 (0.375 0.020) 0.635 0.127 (0.025 0.005) PCB Land Pattern 2.54 0.127 (0.100 0.005) 2.54 (0.10) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 0.0127 (0.010 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 0.051 (0.130 0.002) 4.445 0.254 (0.175 0.010) Dimensions mm (inches) 1.651 0.254 (0.065 0.010) 6 www.clare.com R03 PLA190 PLA190S Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment A0 = 10.10 (0.398) Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PLA190-R03 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 8/13/2010