Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742), Web: www.alphawire.com
Customer Specification
PART NO. M16133KW
Construction
Diameters (In)
1) Component 1 33 X 1 COND
a) Conductor 16 (26/30) AWG BC 0.060
b) Insulation 0.016" Wall, Nom. PVC/ 0.005" Wall NYLON 0.102
(1) Print ALPHANUMERIC NUMBERS - 1-ONE ALTERNATING AND
INVERTED
(2) Color Code Alpha Wire Color Code KW
Cond Color Cond Color Cond Color
1 GREEN/YELLOW 12 BLACK#11 23 BLACK#22
2 BLACK#1 13 BLACK#12 24 BLACK#23
3 WHITE/BLACK 14 BLACK#13 25 BLACK#24
4 BLACK#3 15 BLACK#14 26 BLACK#25
5 BLACK#4 16 BLACK#15 27 BLACK#26
6 BLACK#5 17 BLACK#16 28 BLACK#27
7 BLACK#6 18 BLACK#17 29 BLACK#28
8 BLACK#7 19 BLACK#18 30 BLACK#29
9 BLACK#8 20 BLACK#19 31 BLACK#30
10 BLACK#9 21 BLACK#20 32 BLACK#31
11 BLACK#10 22 BLACK#21 33 BLACK#32
2) Cable Assembly 33 Components Cabled
a) Twists: 1.3 Twists/foot (min)
b) Core Wrap Clear Mylar Tape, 25% Overlap, Min.
3) Jacket 0.085" Wall, Nom.,PVC 0.857+/- 0.041
a) Color(s) SLATE
b) Print
ALPHA WIRE-* P/N M16133KW 33C 16 AWG (1.32mm2)
SERIES M (UL) WTTC 90C DRY 75C WET 1000V OR
(UL) TC-ER 90C DRY 75C WET 600V SUN RES
DIR BUR OIL RES I OR MTW 16 AWG OR (UL) PLTC 90C
--- LLXXXXXX CSA AWM I/II A/B 90C 600V FT4
CE ROHS (DATE CODE) (SEQ FOOTAGE)
* = Factory Code
[Note: Product may have c(UL) or CSA markings depending upon plant of manufacture.]
Applicable Specifications
1) UL TC 90°C Dry / 75°C Wet / 600 VRMS
EXPOSED RUN
SUN RES
PLTC 90°C
DIRECT BURIAL
OIL RES I
MTW 90°C Dry / 60°C Wet / 600 VRMS
WTTC 90°C / 1000 VRMS
2) CSA International FT4
AWM I/II A/B 90°C / 600 VRMS
3) CE: EU Low Voltage Directive 2006/95/EC
Environmental
1) CE: EU Directive 2011/65/EU(RoHS2):
This product complies with European Directive 2011/65/EU (RoHS Directive) of the European
Parliament and of the Council of 8 June 2011. No Exemptions are required for RoHS
Compliance on this item. Consult Alpha Wire's web site for RoHS C of C.
2) REACH Regulation (EC 1907/2006):
This product does not contain Substances of Very High Concern (SVHC) listed on the European
Union's REACH candidate list in excess of 0.1% mass of the item. For up-to-date information,
please see Alpha's REACH SVHC Declaration.
3) California Proposition 65: The outer surface materials used in the manufacture of this part meet the requirements of
California Proposition 65.
Properties
Physical & Mechanical Properties
1) Temperature Range -25 to 90°C
2) Bend Radius 10X Cable Diameter
3) Pull Tension 674 Lbs, Maximum
4) Sunlight Resistance Yes
5) Direct Burial Yes
Electrical Properties (For Engineering purposes only)
1) Voltage Rating 600 VRMS
2) Capacitance 31 pf/ft @1 kHz, Nominal Conductor to Conductor
3) Inductance 0.18 µH/ft, Nominal
4) Conductor DCR 4.1 Ω/1000ft @20°C, Nominal
Other
Packaging Flange x Traverse x Barrel (inches)
a) Bulk(Made-to-order)
www.alphawire.com
Alpha Wire | 711 Lidgerwood Avenue, Elizabeth, NJ 07207
Tel: 1-800-52 ALPHA (25742)
Although Alpha Wire (“Alpha”) makes every reasonable effort to ensure their accuracy at the time of publication, information and specifications
described herein are subject to errors or omissions and to changes without notice, and the listing of such information and specifications does not
ensure product availability.
Alpha provides the information and specifications herein on an “AS IS” basis, with no representations or warranties, whether express, statutory or
implied. In no event will Alpha be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary) whatsoever,
even if Alpha had been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out
of or in connection with the use, or inability to use, the information or specifications described herein.
ALPHA WIRE - CONFIDENTIAL AND PROPRIETARY
Notice to persons receiving this document and/or technical information.This document is confidential and is the exclusive property of ALPHA WIRE,
and is merely on loan and subject to recall by ALPHA WIRE at any time. By taking possession of this document, the recipient acknowledges and
agrees that this document cannot be used in any manner adverse to the interests of ALPHA WIRE, and that no portion of this document may be
copied or otherwise reproduced without the prior written consent of ALPHA WIRE. In the case of conflicting contractual provisions, this notice shall
govern the status of this document. ©2013 ALPHA WIRE - all rights reserved.
EU/China ROHS CERTIFICATE OF COMPLIANCE
To Whom It May Concern:
Alpha Wire Part Number: M16133KW
M16133KW , RoHS-Compliant Commencing With 8/1/2005 Production
This document certifies that the Alpha part number cited above is manufactured in accordance with Directive 2011/65/EU of the European
Parliament, better known as the RoHS Directive, with regards to restrictions of the use of certain hazardous substances used in the manufacture of
electrical and electronic equipment. The reader is referred to this Directive for the specific definitions and extents of this Directive. No Exemptions
are required for RoHS Compliance on this item. Additionally, Alpha certifies that the listed part number is in compliance with China RoHS “Marking
for Control of Pollution by Electronic Information Products” standard SJ/T 11364-2006.
Substance Maximum Control Value
Lead 0.1% by weight (1000 ppm)
Mercury 0.1% by weight (1000 ppm)
Cadmium 0.01% by weight (100 ppm)
Hexavalent Chromium 0.1% by weight (1000 ppm )
Polybrominated Biphenyls (PBB) 0.1% by weight (1000 ppm)
Polybrominated Diphenyl Ethers (PBDE) ,
Including Deca-BDE 0.1% by weight (1000 ppm)
The information provided in this document and disclosure is correct to the best of Alpha Wire's knowledge, information and belief at the date of its
release. The information provided is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or
the one that it will become part of. The intent of this document is not to be considered a warranty or quality specification. Regulatory information is
for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual
usage of the product.
Authorized Signatory for the Alpha Wire Company:
Dave Watson, Director of Engineering & QA 8/6/2015
Alpha Wire
711 Lidgerwood Ave.
Elizabeth, NJ 07207
Tel: 1-908-925-8000
