TX-400 Temperature Compensated Crystal Oscillator TX-400 Features Applications * EFC Standard * Hermetic * Wide Frequency Range * Frequency Range: 2 MHZ to 200 MHZ * Previous Model: C2400, TQDILTC; 979; 979W, 959; 959W, TC-400 * * * * PCS Base Stations Land Mobile Radio Cellular Telephony Radio in the Local Loop Performance Specifications Parameter Min Typ Max Units Condition Frequency Stabilities 1 vs. operating temperature range (referenced to +25C) -2.5 -2 -1.5 -1.0 -2.0 -1.5 -1.0 -1.5 -1.0 -1.5 -1.0 -0.5 +2.5 +2.0 +1.5 +1.0 +2.0 +1.5 +1.0 +1.5 +1.0 +1.5 +1.0 +0.5 ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm ppm -40... +85C -40... +85C -40... +85C -40... +85C -20... +70C -20... +70C -20... +70C 0... +70C 0... +70C 0... +50C 0... +50C 0... +50C Initial Tolerance vs. supply voltage change vs. load change vs. aging -2.5 -0.2 -0.2 +2.5 +0.2 +0.2 ppm ppm ppm ppm/yr at time of shipment, nominal EFC Vs 5% Load 10% 1.0 Supply Voltage (Vs) Supply voltage 3.135 3.3 3.465 VDC Supply voltage 4.75 5.0 5.25 VDC 15 50 18 50 mA mA mA mA Current consumption @ +25C & 3.3VDC & clipped sinewave @ +25C & 3.3VDC & CMOS @ +25C & 5.0VDC & clipped sinewave @ +25C & 5.0VDC & CMOS Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Performance Specifications Parameter Min Typ Max Units Condition RF Output HCMOS Signal 13.5 Load 15 Signal Level (Vol) Signal Level (Voh) 4.5 3.0 Duty cycle 40 50 16.5 pF +0.5 +0.3 V with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load V with Vs=5.0V and 15pF load with Vs=3.3V and 15pF load % @ (Voh-Vol)/2 60 Clipped Sinewave Signal Load R 9 10 11 kohm || C 9 10 11 pF 0.7 Output Power Vpp Signal @ 10Kohm||10pF PECL 50 Load ohm -1.6 Signal Level (Vol) -1.04 Signal Level (Voh) V 40 Duty cycle V Rise/Fall Time 60 % 3 ns Sinewave Signal Load 50 ohm 6 dBm Harmonics -20 dBc Spurious -60 dBc Output Power 0 Frequency Tuning (EFC) Tuning Range Fixed Frequency Tuning Range 8.0 12.0 Linearity Initial Accuracy 2.5 ppm @ +25C 20.0 ppm 10 % Positive Tuning Slope Control Voltage Range 0.3 0.5 Freq. control input impedance 10 1.65 2.5 3.0 4.5 VDC VDC with Vs=3.3VDC with Vs=5.0VDC kohm Additional Parameters1 Phase Noise3 (@ 40 MHz) Weight -90 -120 -140 -150 dBc/Hz dBc/Hz dBc/Hz dBc/Hz 6.0 g Processing & Packing 10 Hz 100 Hz 1 kHz 10 kHz Handling & processing note Absolute Maximum Ratings Supply voltage (Vs) Control Voltage 0 Maximum output load @ CMOS 6.0 V Vs V 50 pF Operable temperature range -40 +85 C Storage temperature range -55 +125 C Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Standard Shipping Method Lage im Gurt Position in tape Pin 1 A Abwickelrichtung Unwinding direction X B P Gurtunterseite Tape buttom side K Gurtoberseite Tape upper side *bei W 24 mm nur untere Lochreihe by W 24 mm only lower hole line Production tolerance complying DIN IEC 286-3 Enclosure Type Tape width W [mm] Quantity per meter Quantity per reel Dimension P Type B 44 50 300 20 Type C 44 50 300 20 Recommended Reflow Profile Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Outline Drawing / Enclosure Dimensions in mm Dimensions in mm Dimensions in inches Type B Type A Code Height "H" Pin Length "L" Code 0 7.5 5.85 3 1 8.0 5.85 2 10.1 5.85 Type C Height "H" Pin Length "L" Code Height "H" Pin Length "L" 9.4 NA 4 0.45 NA 20,7max. G 125 15,24 0,3 13,1max. 8 5,85min. o0,45 2,3 0,8max. H 14 7,62 0,3 7 1 4,58 0,5 H = 7,5max.; 12,2 0,5 Pin Connections 1 Electronic Frequency Control (EFC) 7 Ground (Case) 8 RF Output 14 Supply Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com Ordering Information TX - 400 0 - D A J - 206 0 - 10M0000000 Frequency Product Family TX: TCXO Tuning Option 0: No Tuning (Fixed Frequency) 1: Electrical Frequency Adjust (EFC) Package 13 x 20 mm Height 0: A 7.5mm 1: A 8.0mm 2: A 10.1mm 3: B 9.4mm 4: C 0.45" Stability Code 256: 2.5ppm 206: 2.0ppm 156: 1.5ppm 106: 1.0ppm 507: 0.5ppm Supply Voltage D: 5 Vdc E: 3.3 Vdc RF Output Code A: HCMOS C: PECL E: Sinewave F: Sinewave, clipped Temperature Range E: -40C to +85C J: -20C to +70C T: 0C to +70C P: 0C to +50C Notes: 1. Contact factory for improved stabilities or additional product options. Not all options and codes are available at all frequencies. 2. Unless other stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control voltage, load, temperature (25C). 3. Phase noise degrades with increasing output frequency. 4. Subject to technical modification. 5. Contact factory for availability. For Additional Information, Please Contact USA: Vectron International 267 Lowell Road Hudson, NH 03051 Tel: 1.888.328.7661 Fax: 1.888.329.8328 Europe: Vectron International Landstrasse, D-74924 Neckarbischofsheim, Germany Tel: +49 (0) 3328.4784.17 Fax: +49 (0) 3328.4784.30 Asia: Vectron International 68 Yin Cheng Road(C), 22nd Floor One LuJiaZui Pudong, Shanghai 200120, China Tel: +86 21 6194 6886 Fax: +86 21 6194 6699 Disclaimer Vectron International reserves the right to make changes to the product(s) and or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. Rev: 11/7/2013 jar Vectron International * 267 Lowell Road, Hudson, NH 03051 * Tel: 1-88-VECTRON-1 * http://www.vectron.com