MR2520L 5000 W Load Dump Glass Passivated Automotive Transient Voltage Suppressor Dimensions in mm. P-6 (Plastic) * Developped to suppress transient in the automotive system, protecting mobile transceivers, radios and tape decks from overvoltages (width pulses). (R) 8.7 0.3 59.5 min. Mounting instructions 1. Min. distance from body to soldering point, 4 mm. 2. Max. solder temperature, 350 C. 3. Max. soldering time, 3.5 sec. 4. Do not bend lead at a point closer than 4 mm. to the body. * Glass passivated junction * Low Capacitance AC signal protection * Response time typically < 1 ns. * Molded case * The plastic material carries U/L recognition 94 V-0 * Terminals: Axial leads Maximum Ratings, according to IEC publication No. 134 MR 2520 L PPP Peak pulse power with 10/1000 s exponential pulse Tj Operating temperature range - 65 to + 175 C TSTG Storage temperature range - 65 to + 175 C 5000 W Electrical Characteristics at Tamb = 25 C VRRM VDC Peak repetitive reverse voltage 23 V IRSM Repetitive peak reverse surge current (t = 10 msec.) 68 A IR Max. reverse current at VR = 23 Vdc 20 A VBR Breakdown voltage at IR = 100 mA UCL Max. clamping voltage at I = 40 A Rthj-l Max. thermal resistance (I = 10 mm.) Min. Min. 24 V 24 V Max. Max. 32 V 32 V 40 V 10 C/W Jan - 00 MR2520L 500 300 200 100 70 50 30 20 10 1 2 5 10 20 50 100 200 500 T. time constant (ms.) 5000 4000 3000 2000 1000 700 500 1 2 5 10 20 50 100 200 500 T. time constant (ms.) Jan - 00