MCC TM Micro Commercial Components 1N4728 THRU 1N4761 1N476 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features 1.0 Watt Hermetic Glass Package Silicon Planar Zener Diodes Zener Diode Lead Free Finish/Rohs Compliant (Note2) ("P"Suffix designates Compliant. See ordering information) Moisture Sensitivity: Level 1 3.3 to 75 Volts Mechanical Data DO-41G Case: DO-41 Glass Package Marking : Cathode band and type number Weight: 0.309 grams (Approx.) Maximum Ratings D o o Operating Temperature: -65 C to +200 C Storage Temperature: -65 C to +200 C For capacitive load, derate current by 20% o o A Cathode Mark B Electrical Characteristics @ 25oC Unless Otherwise Specified DC Power Dissipation Forward Voltage Drop Thermal Resistance Power Derating o from 100 C Pd 1.0W VF 1.2V RthJA 100K/W Ptot 10mW/oC D TA 50OC C Note 1 DIMENSIONS INCHES MM DIM Note: (1) Valid provided that electrodes at a distance of 10mm from case are kept at ambient NOTE MIN MAX MIN MAX A ----- 0.177 ----- 4.50 B ----- 0.110 ----- 2.80 Diameter C 0 .0 2 6 0 .0 34 0.70 0.90 Diameter D 1. 00 0 ----- 2 5. 40 ----- temperature. (2). Lead in Glass Exemption Applied, see EU Directive Annex 5. Revision: A www.mccsemi.com 1 of 4 2011/01/01 MCC 1N4728 thru 1N4761 Micro Commercial Components Electrical Characteristics (T A = 25C unless otherwise noted). Maximum Dynamic Impedance MCC Zener Test Part Number Voltage Current VZ @IZT IZT ZZT @IZT ZZK @IZK IZK Volts mA OHMS OHMS 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 76 69 64 58 53 49 45 41 37 34 31 28 25 23 21 19 17 15.5 14 12.5 11.5 10.5 9.5 8.5 7.5 7 6.5 6 5.5 5 4.5 4 3.7 3.3 10 10 9 9 8 7 5 2 3.5 4 4.5 5 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 750 1000 1000 1000 1000 1500 1500 1500 2000 2000 2000 2000 1N4728 1N4729 1N4730 1N4731 1N4732 1N4733 1N4734 1N4735 1N4736 1N4737 1N4738 1N4739 1N4740 1N4741 1N4742 1N4743 1N4744 1N4745 1N4746 1N4747 1N4748 1N4749 1N4750 1N4751 1N4752 1N4753 1N4754 1N4755 1N4756 1N4757 1N4758 1N4759 1N4760 1N4761 Note Maximum VF = 1.2V at IF = 200mA Maximum Reverse Surge Maximum Leakage Current Current Regulator Current IR IZM IR @VR VR mA uA Volts mA mA 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 20.6 22.8 25.1 27.4 29.7 32.7 35.8 38.8 42.6 47.1 51.7 56 1380 1260 1190 1070 970 890 810 730 660 605 550 500 454 414 380 344 304 285 250 225 205 190 170 150 135 125 115 110 95 90 80 70 65 60 276 252 234 217 193 178 162 146 133 121 110 100 91 83 76 69 61 57 50 45 41 38 34 30 27 25 23 22 19 18 16 14 13 12 1: The JEDEC type number shown with an A suffix have a 5% tolerance on nominal zener voltage. No suffix signifies a 10% tolerance, C signifies 2%. 2: The Zener impedance is derived from the 60 Hz ac voltage, which results when an ac current having an rms value equal to 10% of the DC Zener current(I ZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and eliminate unstable units. o 3: The reverse surge current is measured at 25 C ambient using a 1/2 square wave or equivalent sine wave pulse 1/120 second duration superimposed on I ZT. 4: Voltage measurements tobe performed 90 seconds after application of DC current. 5: RoHs Compliant already and Pb-free sticker on reel , box & carton indicated RoHs compliant . Revision: A www.mccsemi.com 2 of 4 2011/01/01 TM MCC 1N4728 thru 1N4761 TM +6 VZ , TEMPERATURE COEFFICIENT (mV/C) 175 150 125 100 75 50 25 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 VZ @ IZ TA = 25C +4 +2 20 mA 0 0.01 mA 1 mA NOTE: BELOW 3 VOLTS AND ABOVE 8 VOLTS NOTE: CHANGES IN ZENER CURRENT DO NOT NOTE: EFFECT TEMPERATURE COEFFICIENTS -2 -4 1 3 4 6 7 8 VZ, ZENER VOLTAGE (VOLTS) Figure 1. Typical Thermal Resistance versus Lead Length Figure 2. Effect of Zener Current 1000 500 TJ = 25C iZ(rms) = 0.1 IZ(dc) f = 60 Hz VZ = 2.7 V 200 47 V 100 27 V 50 20 6.2 V 10 5 1000 700 500 TJ = 25C iZ(rms) = 0.1 IZ(dc) f = 60 Hz IZ = 1 mA 200 100 70 50 5 mA 20 mA 20 10 7 5 2 2 1 1 0.1 0.2 0.5 1 2 5 10 IZ, ZENER CURRENT (mA) 20 50 100 1 2 Figure 3. Effect of Zener Current on Zener Impedance Ppk , PEAK SURGE POWER (WATTS) 5 L, LEAD LENGTH TO HEAT SINK (INCHES) Z Z , DYNAMIC IMPEDANCE (OHMS) Z Z , DYNAMIC IMPEDANCE (OHMS) JL , JUNCTION-TO-LEAD THERMAL RESISTANCE (mV/C/W) Micro Commercial Components 100 70 50 3 5 7 10 20 30 VZ, ZENER CURRENT (mA) 70 100 Figure 4. Effect of Zener Voltage on Zener Impedance RECTANGULAR WAVEFORM TJ = 25C PRIOR TO INITIAL PULSE 11 V-100 V NONREPETITIVE 5% DUTY CYCLE 30 50 3.3 V-10 V NONREPETITIVE 20 10 7 5 10% DUTY CYCLE 20% DUTY CYCLE 3 2 1 0.01 0.02 0.05 0.1 0.2 0.5 This graph represents 90 percentile data points. For worst case design characteristics, multiply surge power by 2/3. 1 2 5 PW, PULSE WIDTH (ms) 10 20 50 100 200 500 1000 Figure 5. Maximum Surge Power Revision: A www.mccsemi.com 3 of 4 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 2.5Kpcs/Ammo Box Part Number-BP Bulk: 50Kpcs/Carton ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. Revision: A www.mccsemi.com 4 of 4 2011/01/01 3