Physical Characteristics (Overall)
Conductor
Outer Jacket
Outer Jacket Material:
Outer Jacket Material
Unjacketed
Overall Cable
Overall Nominal Diameter: 0.451 in.
Mechanical Characteristics (Overall)
Operating Temperature Range: -10°C To +75°C
Separation Temperature Range: 0°C To +75°C
Bulk Cable Weight: 74.000 lbs/1000 ft.
Max. Recommended Pulling Tension: 140.000 lbs.
Min. Bend Radius/Minor Axis: 4.500 in.
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
EU Directive 2011/65/EU (ROHS II): Yes
EU Directive 2000/53/EC (ELV): Yes
EU Directive 2002/95/EC (RoHS): Yes
EU RoHS Compliance Date (mm/dd/yyyy): 04/01/2005
EU Directive 2002/96/EC (WEEE): Yes
EU Directive 2003/11/EC (BFR): Yes
CA Prop 65 (CJ for Wire & Cable): Yes
MII Order #39 (China RoHS): Yes
Applicable Patents:
Country
www.belden.com/p
Plenum/Non-Plenum
Plenum (Y/N): No
Plenum Number: 602PTZ
Notes (Overall)
Notes: RG59 CCTV + 1 STP18 AWG Control Grade + 2C 18 AWG CMR. Individually jacketed and color coded components, cabled around and each fused to a central binding
spline. Cold environment installation: When installing cables that have been stored at ambient temperatures of 32 degrees Fahrenheit (0 degrees Centigrade) or lower,
Belden recommends conditioning of the cable for 12 hours at room temperature prior to individual cable leg separation.
Put Ups and Colors:
Item # Putup Ship Weight Color Notes Item Desc
502PTZ 0001000 1,000 FT 89.000 LB NONE RG59 +2C18 FS +2C18 CMR BPEEL
502PTZ 000500 500 FT 45.000 LB NONE RG59 +2C18 FS +2C18 CMR BPEEL
Revision Number: 1 Revision Date: 02-28-2014
© 2016 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to
change without notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for
any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether
in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities
and in our Distributor’s inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is
correct to the best of Belden’s knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the
safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification.
Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the
product.
Belden declares this product to be in compliance with EU LVD (Low Voltage Directive 2014/35/EU).