LM833 LM833 Dual Audio Operational Amplifier Literature Number: SNOSBD8D LM833 Dual Audio Operational Amplifier General Description Features The LM833 is a dual general purpose operational amplifier designed with particular emphasis on performance in audio systems. This dual amplifier IC utilizes new circuit and processing techniques to deliver low noise, high speed and wide bandwidth without increasing external components or decreasing stability. The LM833 is internally compensated for all closed loop gains and is therefore optimized for all preamp and high level stages in PCM and HiFi systems. The LM833 is pin-for-pin compatible with industry standard dual operational amplifiers. > 140dB j Wide dynamic range: j Low input noise 4.5nV/Hz voltage: j High slew rate: j High gain bandwidth: 7 V/s (typ); 5V/s (min) 15MHz (typ); 10MHz (min) j Wide power bandwidth: 120KHz j Low distortion: 0.002% j Low offset voltage: 0.3mV j Large phase margin: 60 j Available in 8 pin MSOP package Schematic Diagram (1/2 LM833) 00521801 (c) 2004 National Semiconductor Corporation DS005218 www.national.com LM833 Dual Audio Operational Amplifier January 2003 LM833 Connection Diagram 00521802 Order Number LM833M, LM833MX, LM833N, LM833MM or LM833MMX See NS Package Number M08A, N08E or MUA08A www.national.com 2 Storage Temperature Range TSTG If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Soldering Information Dual-In-Line Package Soldering (10 seconds) Supply Voltage VCC-VEE 36V Power Dissipation (Note 4) PD Operating Temperature Range TOPR 500 mW -40 85C DC Electrical Characteristics 260C Small Outline Package (SOIC and MSOP) 30V 15V Differential Input Voltage (Note 3) VI Input Voltage Range (Note 3) VIC -60 150C Vapor Phase (60 seconds) 215C Infrared (15 seconds) 220C ESD tolerance (Note 5) 1600V (Notes 1, 2) (TA = 25C, VS = 15V) Symbol Parameter Conditions Min Typ Max Units mV VOS Input Offset Voltage 0.3 5 IOS Input Offset Current 10 200 nA IB Input Bias Current 500 1000 nA AV Voltage Gain RL = 2 k, VO = 10V VOM Output Voltage Swing RL = 10 k RS = 10 RL = 2 k VCM Input Common-Mode Range 90 110 dB 12 10 12 13.5 13.4 14.0 V V V CMRR Common-Mode Rejection Ratio VIN = 12V 80 100 dB PSRR Power Supply Rejection Ratio VS = 155V, -15-5V 80 100 dB IQ Supply Current VO = 0V, Both Amps 5 8 mA AC Electrical Characteristics (TA = 25C, VS = 15V, RL = 2 k) Symbol Parameter Conditions Min Typ Max Units SR Slew Rate RL = 2 k 5 7 V/s GBW Gain Bandwidth Product f = 100 kHz 10 15 MHz Design Electrical Characteristics (TA = 25C, VS = 15V) The following parameters are not tested or guaranteed. Symbol Parameter VOS/T Average Temperature Coefficient THD Distortion Conditions Typ Units 2 V/C 0.002 % of Input Offset Voltage RL = 2 k, f = 2020 kHz VOUT = 3 Vrms, AV = 1 en Input Referred Noise Voltage RS = 100, f = 1 kHz 4.5 in Input Referred Noise Current f = 1 kHz 0.7 120 kHz 9 MHz 60 deg -120 dB PBW Power Bandwidth VO = 27 Vpp, RL = 2 k, THD 1% fU Unity Gain Frequency Open Loop M Phase Margin Open Loop Input Referred Cross Talk f = 2020 kHz 3 www.national.com LM833 Absolute Maximum Ratings (Note 1) LM833 Design Electrical Characteristics (Continued) Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit is given, however, the typical value is a good indication of device performance. Note 2: All voltages are measured with respect to the ground pin, unless otherwise specified. Note 3: If supply voltage is less than 15V, it is equal to supply voltage. Note 4: This is the permissible value at TA 85C. Note 5: Human body model, 1.5 k in series with 100 pF. Typical Performance Characteristics Maximum Power Dissipation vs Ambient Temperature Input Bias Current vs Ambient Temperature 00521804 00521805 Input Bias Current vs Supply Voltage Supply Current vs Supply Voltage 00521806 www.national.com 00521807 4 LM833 Typical Performance Characteristics (Continued) DC Voltage Gain vs Ambient Temperature DC Voltage Gain vs Supply Voltage 00521808 00521809 Voltage Gain & Phase vs Frequency Gain Bandwidth Product vs Ambient Temperature 00521810 00521811 Gain Bandwidth vs Supply Voltage Slew Rate vs Ambient Temperature 00521812 00521813 5 www.national.com LM833 Typical Performance Characteristics (Continued) Slew Rate vs Supply Voltage Power Bandwidth 00521815 00521814 CMR vs Frequency Distortion vs Frequency 00521819 00521820 Maximum Output Voltage vs Supply Voltage PSRR vs Frequency 00521816 00521818 www.national.com 6 LM833 Typical Performance Characteristics (Continued) Maximum Output Voltage vs Ambient Temperature Spot Noise Voltage vs Frequency 00521817 00521821 Spot Noise Current vs Frequency Input Referred Noise Voltage vs Source Resistance 00521823 00521822 Noninverting Amp Noninverting Amp 00521824 00521825 7 www.national.com LM833 Typical Performance Characteristics (Continued) Inverting Amp 00521826 a resistor in series with the output. This resistor will also prevent excess power dissipation if the output is accidentally shorted. Application Hints The LM833 is a high speed op amp with excellent phase margin and stability. Capacitive loads up to 50 pF will cause little change in the phase characteristics of the amplifiers and are therefore allowable. Capacitive loads greater than 50 pF must be isolated from the output. The most straightforward way to do this is to put Noise Measurement Circuit 00521827 Complete shielding is required to prevent induced pick up from external sources. Always check with oscilloscope for power line noise. Total Gain: 115 dB @f = 1 kHz Input Referred Noise Voltage: en = V0/560,000 (V) www.national.com 8 LM833 RIAA Preamp Voltage Gain, RIAA Deviation vs Frequency Flat Amp Voltage Gain vs Frequency 00521828 00521829 Typical Applications NAB Preamp Voltage Gain vs Frequency NAB Preamp 00521831 00521830 AV = 34.5 F = 1 kHz En = 0.38 V A Weighted Balanced to Single Ended Converter Adder/Subtracter 00521833 VO = V1 + V2 - V3 - V4 00521832 VO = V1-V2 9 www.national.com LM833 Typical Applications (Continued) Sine Wave Oscillator 00521834 Second Order High Pass Filter (Butterworth) Second Order Low Pass Filter (Butterworth) 00521835 00521836 Illustration is f0 = 1 kHz Illustration is f0 = 1 kHz www.national.com 10 LM833 Typical Applications (Continued) State Variable Filter 00521837 Illustration is f0 = 1 kHz, Q = 10, ABP = 1 AC/DC Converter 00521838 2 Channel Panning Circuit (Pan Pot) Line Driver 00521839 00521840 11 www.national.com LM833 Typical Applications (Continued) Tone Control 00521841 Illustration is: fL = 32 Hz, fLB = 320 Hz fH =11 kHz, fHB = 1.1 kHz 00521842 RIAA Preamp 00521803 Av = 35 dB En = 0.33 V S/N = 90 dB f = 1 kHz A Weighted A Weighted, VIN = 10 mV @ f = 1 kHz www.national.com 12 LM833 Typical Applications (Continued) Balanced Input Mic Amp 00521843 Illustration is: V0 = 101(V2 - V1) 13 www.national.com LM833 Typical Applications (Continued) 10 Band Graphic Equalizer 00521844 fo(Hz) C1 C2 R1 R2 32 0.12F 4.7F 75k 500 64 0.056F 3.3F 68k 510 125 0.033F 1.5F 62k 510 250 0.015F 0.82F 68k 470 500 8200pF 0.39F 62k 470 1k 3900pF 0.22F 68k 470 2k 2000pF 0.1F 68k 470 4k 1100pF 0.056F 62k 470 8k 510pF 0.022F 68k 510 16k 330pF 0.012F 51k 510 Note 6: At volume of change = 12 dB Q = 1.7 Reference: "AUDIO/RADIO HANDBOOK", National Semiconductor, 1980, Page 2-61 www.national.com 14 LM833 Typical Applications (Continued) LM833 MDC MWC DUAL AUDIO OPERATIONAL AMPLIFIER 00521854 Die Layout (A - Step) DIE/WAFER CHARACTERISTICS Fabrication Attributes General Die Information Physical Die Identification LM833A Bond Pad Opening Size (min) 110m x 110m Die Step A Bond Pad Metalization ALUMINUM Passivation VOM NITRIDE Physical Attributes Wafer Diameter 150mm Back Side Metal BARE BACK Dise Size (Drawn) 1219m x 1270m 48mils x 50mils Back Side Connection Floating Thickness 406m Nominal Min Pitch 288m Nominal Special Assembly Requirements: Note: Actual die size is rounded to the nearest micron. Die Bond Pad Coordinate Locations (A - Step) (Referenced to die center, coordinates in m) NC = No Connection SIGNAL NAME PAD# NUMBER X/Y COORDINATES X PAD SIZE Y X Y OUTPUT A 1 -476 500 110 x 110 INPUT A- 2 -476 -212 110 x 110 INPUT A+ 3 -476 -500 110 x 110 VEE- 4 -0 -500 110 x 110 INPUT B+ 5 476 -500 110 x 110 INPUT B- 6 476 -212 110 x 110 OUTPUT B 7 476 500 110 x 110 VCC+ 8 0 500 110 x 110 15 www.national.com LM833 Typical Applications (Continued) IN U.S.A Tel #: 1 877 Dial Die 1 877 342 5343 Fax: 1 207 541 6140 IN EUROPE Tel: 49 (0) 8141 351492 / 1495 Fax: 49 (0) 8141 351470 IN ASIA PACIFIC Tel: (852) 27371701 IN JAPAN Tel: www.national.com 81 043 299 2308 16 LM833 Physical Dimensions inches (millimeters) unless otherwise noted Molded Small Outline Package (M) Order Number LM833M or LM833MX NS Package Number M08A Molded Dual-In-Line Package (N) Order Number LM833N NS Package Number N08E 17 www.national.com LM833 Dual Audio Operational Amplifier Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 8-Lead (0.118" Wide) Molded Mini Small Outline Package Order Number LM833MM or LM833MMX NS Package Number MUA08A National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. For the most current product information visit us at www.national.com. LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no ``Banned Substances'' as defined in CSP-9-111S2. National Semiconductor Americas Customer Support Center Email: new.feedback@nsc.com Tel: 1-800-272-9959 www.national.com National Semiconductor Europe Customer Support Center Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Support Center Email: ap.support@nsc.com National Semiconductor Japan Customer Support Center Fax: 81-3-5639-7507 Email: jpn.feedback@nsc.com Tel: 81-3-5639-7560 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated