e3
DS21205 Rev. 10 - 2 1 of 3 KBP2005G-KBP210G
www.diodes.com ãDiodes Incorporated
KBP2005G - KBP210G
2.0A GLASS PASSIVATED BRIDGE RECTIFIER
C
E
G
H
JK
L
M
N
P
+_
A
B
D
KBP
Dim Min Max
A14.25 14.75
B10.20 10.60
C2.29 Typical
D14.25 14.73
E3.56 4.06
G0.76 0.86
H1.17 1.42
J2.8 X 45°
Chamfer
K0.80 1.10
L3.35 3.65
M3° Nominal
N2° Nominal
P0.30 0.64
All Dimensions in mm
Characteristic Symbol KBP
2005G
KBP
201G
KBP
202G
KBP
204G
KBP
206G
KBP
208G
KBP
210G Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR
50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @ TC= 105°C IO2.0 A
Non-Repetitive Peak Forward Surge Current, 8.3 ms single
half-sine-wave superimposed on rated load IFSM 65 A
Forward Voltage per element @ IF= 2.0A VFM 1.1 V
Peak Reverse Current @ TC= 25°C
at Rated DC Blocking Voltage @ TC= 125°C IRM 5.0
500 µA
Typical Total Capacitance per Element (Note 2) CT25 pF
Typical Thermal Resistance (Note 1) RqJC 14 °C/W
Operating and Storage Temperature Range Tj,T
STG -65 to +150 °C
·Case: KBP
·Case Material: Molded Plastic. UL Flammability
Classification Rating 94V-0
·Moisture Sensitivity: Level 1 per J-STD-020C
·Terminals: Finish - Tin. Plated Leads, Solderable per
MIL-STD-202, Method 208
·Polarity: Marked on Body
·Ordering Information: See Last Page
·Marking: Type Number
·Weight: 1.52 grams (approximate)
Mechanical Data
·Glass Passivated Die Construction
·High Case Dielectric Strength of 1500VRMS
·Low Reverse Leakage Current
·Surge Overload Rating to 65A Peak
·Ideal for Printed Circuit Board Applications
·UL Listed Under Recognized Component Index, File
Number E94661
·Lead Free Finish, RoHS Compliant (Note 3)
Single phase, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Ratings and Electrical Characteristics @ TA= 25°C unless otherwise specified
Notes: 1. Thermal resistance from junction to case per element. Unit mounted on 75 x 75 x 1.6mm aluminum plate heat sink.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC.
3. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see
EU Directive Annex Notes 5 and 7.
Features
DS21205 Rev. 10 - 2 2 of 3 KBP2005G-KBP210G
www.diodes.com
0
0.1
1.0
10
0 0.2 0.4 0.6 0.8 1.0 1.2 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fi
g
.2 T
y
pical Forward Characteristics
F
T = 150°C
J
T=25°C
J
0
80
20
60
40
100
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Peak Forward
Sur
g
e Current
T = 150°C
Single Half
Sine Wave
j
1
10
100
1 10 100
C , TOTAL CAPACITANCE (pF)
T
V , REVERSE VOLTAGE (V)
Fi
g
.4 T
y
pical Total Capacitance, Per Element
R
T=25°C
f=1MHz
j
0.01
0.1
1.0
10
100
1000
10
,
000
0 20 40 60 80 100 120 140
I , INSTANTANEOUS REVERSE CURRENT (mA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fi
g
.5 T
y
pical Reverse Characteristics
T = 125°C
j
T = 100°C
j
T=25°C
j
T = 150°C
j
0
0.5
1.0
1.5
2
.
0
0 50 100 150
I
O
, AVERAGE RECTIFIED CURRENT (A)
T, TEMPERATURE (°C)
Fi
g
. 1 Forward Current Deratin
g
Curve
Ambient
Case
Lead
DS21205 Rev. 10 - 2 3 of 3 KBP2005G-KBP210G
www.diodes.com
Device Packaging Shipping
KBP2005G KBP 35 pieces per Tube
KBP201G KBP 35 pieces per Tube
KBP202G KBP 35 pieces per Tube
KBP204G KBP 35 pieces per Tube
KBP206G KBP 35 pieces per Tube
KBP208G KBP 35 pieces per Tube
KBP210G KBP 35 pieces per Tube
Notes: 4. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02008.pdf.
Ordering Information (Note 4)
IMPORTANT NOTICE
LIFE SUPPORT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further
notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither
does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will
agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages.
Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the
President of Diodes Incorporated.
