UNCONTROLLED DOCUMENT CATHODE MASK P 27 +0.15 +0.006 ~_ 2.54t0 18 oe KY 2.25 [0.089] 3.00 [0.118] 8 GREEN oDto = RED Dt S o ~ [ow \ g, o 3 2, 3B g RECOMMENDED SOLDER PAD LAYOUT 2.50 [0.098] 0.50 [0.020] 2.00 [0.079] ~ (2 PLS.) 1.00 [0.039] PART NUMBER CCLCRS10R/G REV. | J DATE E.C.N. NUMBER AND REVISION COMMENTS REV. 04.27.93 REDRAWN. A 01.14.94 CORRECTED WAVELENGTH. B 09.27.94 UPDATED SOLDER SPECS. Cc 10.02.98 E.C.N. #10390 & #10BRDR & REDRAWN. D 12.11.98 E.C.N. #10484 ADDED SOLDER PROFILE E 01.12.01 E.C.N. #10695. & REDRAWN IN 3D. F 03.14.03 E.C.N. #10967. G 09.15.05 E.C.N. #11271. H 01.19.07 E.C.N. #11148. | 06.17.11 E.C.N. #IOBRDR. & REDRAWN/#11730. J ELECTRO-OPTICAL CHARACTERISTICS TA =25C f= 20mA PARAMETER MIN TYP. MAX UNITS TEST COND PEAK WAVELENGTH (R/G) 635/565 nm FORWARD VOLTAGE (R/G) 2.0/2.2 2.5/2.6 VE REVERSE VOLTAGE 40 Wr Ir=100pA AXIAL INTENSITY (R/C) 4/12 med If=20mA VIEWING ANGLE 180 2x theta EMITTED COLOR: RED/GREEN EPOXY LENS FINISH: WATER CLEAR UMITS OF SAFE OPERATION AT 25C PARAMETER MAX UNITS PEAK FORWARD CURRENT* 100 mA STEADY CURRENT 25 mA POWER DISSIPATION 65 mW DERATE. FROM 25C -.33 mw/C OPERATING TEMP. -30 TO +75 c STORAGE TEMP. -40 TO +85 c * tc10uS SOLDER HEAT PROOF TEST: DIPPING FOR 5 SEC. AT 250C, 2 TIMES. THERMAL SHOCK TEST: 15 MIN. AT +90C, AND 15 MIN. AT 30C, 25 CYCLES. SOHz, FULL AMPLITUDE WIDTH; 1.5mm, 2 VIBRATION TEST: HOURS VERTICALLY AND HORIZONTALLY, RESPECTIVELY. MOISTURE TEST: Ta=60C, Rh=90%, 1,000 HOURS. IRON SOLDERING: 20W IRON (SHARP TIP), 280-320C, 5 SEC. MAX. SOLDER DIP METHOD: TEMP, IS 240-260C AND TIME IS WITHIN 10 SEC. RE-FLOW SOLDERING: SEE CHART. *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X=1 (40.039), X.X=20.5 (40.020), XXX=20.25 (40.010), X.XXX=0.127 (40.005). LEAD SIZE=:+0.05 (0.002), LEAD LENGTH=+0.75 (40.030). MIN= *DEGIMAL PRECISION yay #000 oo [6] CAUTION: MOISTURE SENSITIVE DEVICE PER JEDEC LEVEL 2A STANDARDS UNCONTROLLED DOCUMENT Creating LED and LCD Solutions Together 290 E. HELEN ROAD IL 60067-6976 PHONE: +1.847.359.2790 FAX: +1.847.359.6538 WEB: WWW.LUMEX.COM PALATINE, 3.0mm x 2.5mm CERAMIC SURFACE MOUNT LED, 635/565nm RED/GREEN LED, WATER CLEAR LENS. **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.** CONFIDENTIAL INFORMATION. THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. DATE: 06.17.11 | DRAWN BY: AB PAGE: 1 OF 2 | CHKD BY: KF SCALE: NTS APRVD BY: ss UNIT: = mm_ [INCH] UNCONTROLLED DOCUMENT PART NUMBER CCLCRS10R/G | rev. | LEAD FREE REFLOW PROFILE 300C SOLDERING AT THE PEAK TEMP. 3 SEC. MAX [20 250C | | 4 | | | 200 | | GRADUAL COOL AT ROOM TEMP. S 7 | 1 MINUTE MIN. ly }160 | ao I 2 150C | ; | = a | | 100C | | | 4 | | | soc PREHEATING | 2 MINUTE MIN. | | 25C | oc 1 f 1 0s 1 2 3 TIME (MINUTES) 4.00 [0.157] +=-2.00 [0.079]- 91.55 [00.061] { | oa 8 Ss, 8 NOTES: + 1. PART SUPPLIED ON SUPER 8 TAPE AND 3 REEL, 3,000 PIECES PER REEL. oe S 2. THE CATHODE IS ORIENTED TOWARDS THE 5 oO TAPE SPROCKET HOLE. Ss 2 3. WHITE CERAMIC CARRIER. 8 o i i 4.00 [0.157] TOP TAPE TAPE FEED DIRECTION *UNLESS OTHERWISE SPECIFIED TOLERANCES PER DECIMAL PRECISION ARE: X=1 (40.039), X.X=+0.5 (40.020), XXX=+0.25 (40.010), X.XXX=0.127 (0.005). LEAD SIZE=+0.05 (:40.002), LEAD LENGTH=+0.75 (10.030). MIN= *BEGIMAL PRECISION yay 7000 CYA OWT POLLED DOCUMENT Creating LED and LCD Solutions Together 290 E. HELEN ROAD PALATINE, IL 60067-6976 PHONE: +1.847.359.2790 FAX: +1.847.359.6538 WEB: WWW.LUMEX.COM 3.0mm x 2.5mm CERAMIC SURFACE MOUNT LED, 635/565nm RED/GREEN LED, WATER CLEAR LENS. DATE: 06.17.11 | DRAWN BY: AB **THE SPECIFICATIONS MAY CHANGE AT ANY TIME WITHOUT NOTICE DUE TO NEW MATERIALS OR PRODUCT IMPROVEMENT.* PAGE: 2 0F 2 CHKD BY: KF CCONEIDENTAL_NEDRUATION SCALE: NTS APRVD BY: SS THE INFORMATION CONTAINED IN THIS DOCUMENT IS THE PROPERTY OF LUMEX INC. EXCEPT AS SPECIFICALLY AUTHORIZED IN WRITING BY LUMEX INC., THE HOLDER OF THIS DOCUMENT SHALL KEEP ALL INFORMATION CONTAINED HEREIN CONFIDENTIAL AND SHALL PROTECT SAME IN WHOLE OR IN PART FROM DISCLOSURE AND DISSEMINATION TO ALL THIRD PARTIES. UNIT: mm [INCH]