85CNQ015APbF, 85CNQ015ASMPbF
2
Bulletin PD-21008 01/05
www.irf.com
IF(AV) Max. Average Forward Current 80 A 50% duty cycle @ TC = 78 °C, rectangular wave form
* See Fig. 5
IFSM Max. Peak One Cycle Non-Repetitive 5200 5µs Sine or 3µs Rect. pulse
Surge Current (Per Leg) * See Fig. 7 850 10ms Sine or 6ms Rect. pulse
EAS Non-Repetitive Avalanche Energy 9 mJ TJ = 25 °C, IAS
= 2 Amps, L = 4.50 mH
(Per Leg)
IAR Repetitive Avalanche Current 2 A Current decaying linearly to zero in 1 µsec
(Per Leg) Frequency limited by TJ max. VA = 3 x VR typical
Part number 85CNQ015A..
VRMax. DC Reverse Voltage (V) 15
VRWM Max. Working Peak Reverse Voltage (V) 25
Voltage Ratings
Absolute Maximum Ratings
Parameters 85CNQ Units Conditions
A
VFM Max. Forward Voltage Drop 0.36 V @ 40A
(Per Leg) * See Fig. 1 (1) 0.45 V @ 80A
0.32 V @ 40A
0.42 V @ 80A
IRM Max. Reverse Leakage Current 20 mA TJ = 25 °C
(Per Leg) * See Fig. 2 (1) 1000 mA TJ = 100 °C
890 mA TJ = 100 °C VR = 12V
540 mA TJ = 100 °C VR = 5V
CTMax. Junction Capacitance (Per Leg) 3600 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance (Per Leg) 5.5 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/ µs
(Rated VR)
Electrical Specifications
TJ = 25 °C
TJ = 75 °C
VR = rated VR
Parameters 85CNQ Units Conditions
TJMax. Junction Temperature Range -55 to 125 °C
Tstg Max. Storage Temperature Range -55 to 150 °C
RthJC Max. Thermal Resistance Junction 0.85 °C/W DC operation * See Fig. 4
to Case (Per Leg)
RthJC Max. Thermal Resistance Junction 0.42 °C/W DC operation
to Case (Per Package)
RthCS Typical Thermal Resistance, Case 0.30 °C/W Mounting surface , smooth and greased
to Heatsink (D61-8 Only) Device flatness < 5 mils
wt Approximate Weight 7.8 (0.28) g (oz.)
T Mounting Torque Min. 40 (35)
(D61-8 Only) Max. 58 (50)
Thermal-Mechanical Specifications
Kg-cm
(Ibf-in)
Parameters 85CNQ Units Conditions
Following any rated
load condition and with
rated VRRM applied
(1) Pulse Width < 300µs, Duty Cycle <2%