DC/DC Converters TDR 2WI Series, 2 Watt UL 60950-1 Features Compact design in SMD or DIP package Ultra wide 4:1 input voltage range Fully regulated outputs Low ripple and noise 30mV pk-pk No minimum load required Temperature range -40C to +85C without derating I/O isolation 1500 VDC Continuous short-circuit protection Remote On/Off control Fully RoHS compliant 3-year product warranty The TDR-2WI series is a family of compact 2 W dc/dc-converters with 4:1 input voltage ranges and tightly regulated output voltages even under no load conditions. The product is available in SMD-package or in DIP-package. They work with high efficiency over the full load range and come with a remote On/Off input. The usability in temperature ranges of up to 85C without power derating, continuous short circuit protection and excellent immunity against environmental influences make these converters very reliable. A TDR-2WI converter is the ideal solution for space critical high end applications in communication equipment, instrumentation and industrial electronics. Models Order code DIP models TDR 2-1211WI Order code SMD models TDR 2-1211WISM TDR 2-1212WI TDR 2-1212WISM TDR 2-1213WI TDR 2-1213WISM TDR 2-1222WI TDR 2-1222WISM TDR 2-1223WI Input voltage range Output voltage 5.0 VDC 4.5 - 18 VDC 12 VDC Output current max. 400 mA 167 mA Efficiency typ. 79 % 80 % 15 VDC 134 mA 81 % 12 VDC 83 mA 81 % TDR 2-1223WISM 15 VDC 67 mA 81 % (12 VDC nominal) TDR 2-2411WI TDR 2-2411WISM 5.0 VDC 400 mA 79 % TDR 2-2412WI TDR 2-2412WISM 12 VDC 167 mA 80 % TDR 2-2413WI TDR 2-2413WISM TDR 2-2422WI TDR 2-2422WISM TDR 2-2423WI 9 - 36 VDC 15 VDC 134 mA 82 % 12 VDC 83 mA 80 % TDR 2-2423WISM 15 VDC 67 mA 81 % (24 VDC nominal) TDR 2-4811WI TDR 2-4811WISM 5.0 VDC 400 mA 78 % TDR 2-4812WI TDR 2-4812WISM 12 VDC 167 mA 81 % TDR 2-4813WI TDR 2-4813WISM 15 VDC 134 mA 82 % TDR 2-4822WI TDR 2-4822WISM TDR 2-4823WI TDR 2-4823WISM http://www.tracopower.com 18 - 75 VDC (48 VDC nominal) 12 VDC 83 mA 81 % 15 VDC 67 mA 81 % Page 1 of 4 DC/DC Converters TDR 2WI Series 2 Watt Input Specifications Input current at no load (nominal input voltage) 12 Vin models: 35 mA typ. 24 Vin models: 20 mA typ. 48 Vin models: 10 mA typ. Input current at full load (nominal input voltage) 12 Vin models: 215 mA typ. 24 Vin models: 110 mA typ. 48 Vin models: 55 mA typ. Surge voltage (1 sec. max.) 12 Vin models: 25 V max. 24 Vin models: 50 V max. 48 Vin models: 100 V max. Input filter capacitor type (see EMC considerations page 3 for compliance to EN 55022 class A/B) ESD (electrostatic discharge) EN 61000-4-2, air 8 kV, contact 6 kV, perf. criteria A Radiated immunity EN 61000-4-3 10 V/m, perf. criteriy A Fast transient / Surge EN 61000-4-4, 2 kV, perf. criteria A EN 61000-4-5, 1 kV perf. criteria A with external input capacitor e.g. Nippon chemi-con KY 220 F, 100 V, ESR 48 mOhm Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A Reflected ripple current (measured with input filter according class A) 12 Vin models: 80 mAp-p typ. 24 Vin models: 40 mAp-p typ. 48 Vin models: 30 mAp-p typ. Output Specifications Voltage set accuracy 1 % max Regulation - Input variation Vin min. to Vin max. - Load variation 0 - 100 % single output models: dual output models: - Load variation 10 - 90 % single output models: dual output models: - Load cross regulation 25/100 % 0.2 % max. 1.0 % max. 1.0 % max. balanced load 0.5 % max. 0.8 % max. balanced load 5.0 % max. (dual output models) Minimum load 0 % of rated max. load Temperature coefficient 0.02 %/K Ripple and noise (20 MHz bandwidth) 30 mV pk-pk typ. Start up time (constant resistive load) - Power On 5 ms typ. - Remote On 5 ms typ. Transient response setting time (25 % load step change) 250 s typ. Short circuit protection indefinite, automatic recovery Capacitive load 5 12 15 12 15 VDC VDC VDC VDC VDC models: models: models: models: models: 1680 F max. 820 F max. 680 F max. 470 F max. 330 F max. General Specifications Temperature ranges - Operating -40C to +85C (with no derating) - Storage -55C to +125C - Case temperature max. +100C Humidity (non condensing) 5 % to 90 % rel. H max. All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 4 DC/DC Converters TDR 2WI Series 2 Watt General Specifications Thermal shock, mechanical shock & vibration EN 61373, MIL-STD-810F - Test conditions www.tracopower.com/products/mil810.pdf Reliability, calculated MTBF (MIL-HDBK-217F, at+25C, ground benign) >6.6 Mio h Isolation voltage (60 sec.) - Input/Output 1500 VDC Isolation capacitance - Input/Output 50 pF max. Isolation resistance - Input/Output (500 VDC) >10 GOhm Altitude during operation tba. Safety standard (designed to meet) IEC/EN 60950-1, UL 60950-1 Safety approvals - UL/cUL www.ul.com -> certifications -> File e188913 - engineering considerations/conditions of acceptability on request: mailto TRACO (enter series) Switching frequency 100 kHz (PWM) Remote On/Off - On: open or high impedance - Off: 2...4 mA current applied via 1KOhm resistor - Off stand by input current 2.5 mA max. Environmental compliance - Reach www.tracopower.com/products/tdr2wi-reach.pdf - RoHS RoHS directive 2011/65/EU EMC Consideration L1 +Vin +Vout TDR 2WI dc/dc-converter C1 -Vin Load Recommended filter for EN 55022 class A compliance -Vout C3 C1 12 VDC 10 F / 25 V 1812 MLCC 24 VDC 6.8 F / 50 V 1812 MLCC 48 VDC 4.7 F / 100 V 1812 MLCC C3 220pF / 3 kV 1808 MLCC L1 Recommended filter for EN 55022 class B compliance C1 L1 value order code (SMD type) datasheet: 2.2 H TCK-059 www.tracopower.com/products/tck059.pdf 18 H TCK-046 www.tracopower.com/products/tck046.pdf +Vin +Vout TDR 2WI dc/dc-converter C2 -Vin Load Input models -Vout C3 Input models C1 & C2 12 VDC 10 F / 25 V 1812 MLCC 24 VDC 2.2 F / 50 V 1812 MLCC 48 VDC 2.2 F / 100 V 1812 MLCC C3 220pF / 3 kV 1808 MLCC L1 value order code (SMD type) datasheet 2.2 H TCK-059 www.tracopower.com/products/tck059.pdf 18 H TCK-046 www.tracopower.com/products/tck046.pdf 27 H TCK-063 www.tracopower.com/products/tck063.pdf All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 3 of 4 DC/DC Converters TDR 2WI Series 2 Watt Pysical Specifications Casing material non-conductive plastic (UL94V-0 rated) Package weight 4.5 g (0.16oz) Soldering profile for DIP-package models max. 265C / 10 sec. (wave soldering) Lead-free reflow solder process for SMD-package models as per J-STD-020D.01 (to find at: www.jedec.org - free registration required) Moisture sensivity level (for SMD-package models) level 2a as per J-STD-033B.01 (to find at: www.jedec.org - free registration required) Packaging - Tube 10 pcs packing unit - Tape & Reel (only SMD models, add suffix -TR) 200 pcs packing unit Outline Dimensions DIP-Models Pin-Out 0.25 (0.01) 13.55 (0.533) 0-15 3.8 6 top view 18.9 (0.74) 9 (0.4) (0.1) 7 2 14 Dual 1 -Vin (GND) -Vin (GND) 2 Remote On/Off Remote On/Off 6 NC Common 7 NC -Vout 8 +Vout +Vout 9 -Vout Common 14 +Vin (Vcc) +Vin (Vcc) NC = not to connect 1 Recommended Solder Pad Dimension: 0.25 (0.01) 18.1 (0.71) 7 9 6 1.8 (0.07) 8 top view 2 14 1 2.0 (0.08) (0.1) 2.54 10.16 1.5 (0.06) 1.0 (0.04) (0.1) 12.8 (0.50) (0.4) 10.16 1.8 2.54 (0.07) (0.1) 2.54 8.7 (0.35) 17.2 (0.68) (0.4) 7.4 (0.29) (0.05) 18.9 (0.74) 1.2 0-4 1.8 2.54 SMD-Models 8 Single (0.07) (0.1) 1.8 2.54 10.16 2.54 12.8 (0.50) (0.07) (0.1) 1.3 (0.05) (0.15) 0.8 (0.03) 8.7 (0.35) Pin Dimensions in [mm], () = Inch Tolerances: 0.5 (0.02) Pin pich tolerances: 0.25 (0.01) Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 18. 2014 Page 4 of 4