Amphenol Amphenol-Tuchel Electronics GmbH eco|matem Circular Connectors www.industrial-amphenol.com The Company Amphenol-Tuchel Electronics GmbH is a member of the USA based Amphenol Corporation. With our own global presence we offer our customers exceptional technical support and worldwide service in the areas of development, production and distribution. Amphenol-Tuchel Electronics GmbH has a successful history as a partner to our customers and sets standards for connector technology. Quality From the beginning of the development process, Amphenol-Tuchel Electronics GmbH gives quality considerations the top priority. Meeting customer requirements is the main focus of the product development process. Interdisciplinary project teams with diverse backgrounds from marketing, product engineering and production guarantee the development and production of robust and reliable connector solutions. Our quality assessment begins with the initial contact to the customer and extends through the life of the product. A satisfied customer is the measure of our success. We strive to use environmentally friendly processes that minimize the waste of natural resources and introduction of toxins into the environment. Certifications: TS 16949 ISO 14001 ISO 9000:2000 General information We reserve the right to change the design due to improvement in quality, development or production requirements. This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code). is a registered trademark. Usage or modification is not allowed without written permission of Amphenol-Tuchel. This release replaces all former releases. 2 Amphenol * New cablee sscrew crew connection co n with with itth clamping ring * Strain relief and mounted gasket all in one component * Ergonomically shaped handle for a better grip and safer handling * Fastening for the protective caps on the receptacle housing * One cable housing for all cable diameters (6 mm - 12,5 mm) Content Page General Information 2 Product Description 4 Technical Data 5 Derating Curves / Order Information 5 Products 6 Technical Data 600V - Version 8 Products 600V - Version 9 Crimp Contacts 10 Accessories 11 Mounting Instructions 12 Technical Information 13 Remarks / Safety Classification 16 Summary of Part Numbers 17 Amphenol 3 Product Description Product Description In design and conception the program meets the high requirements for applications in industrial technology. Easy operation, reduced dimensions and a more robust design are only a few of the features of the series. The connector's main area of application is in the fields of plant construction and machine building. The connector is used for measuring and controlling applications as well as for power supply. technology. The series is comprised of a large selection of housings and shapes and offers models with screw, solder and crimp termination. Features: * Circular Connectors with 3+PE and 6+PE contacts * Housing components made from premium molding material * Cable housing straight or angled * Protection class IP 65/67 in mated condition in accordance with DIN EN 60526 * Clamping ring or internal strain relief Advantages: * Quick and easy assembly * Screwed cable gland with clamping ring * Strain relief and mounted gasket all in one component * Cable housing, straight or angled, for the cable diameter 6 - 12,5 mm * Robust thread for the screwed cable gland * Ergonomically designed product range for safe handling * Pre-loaded ground contact * Fastening for the protective caps on the housing of the receptacles * The program is compatible with the C16-1 series Additional standards: * The 6+PE model corresponds to DIN 9684-1 interface to the signal transmission on inside cabin applications for agricultural machines and tractors Testhouse Characteristics VDE 3+PE, 400 V, 16 A 6+PE, 250 V, 10 A (solder version) 6+PE, 250 V, 13 A (crimp version) 3+PE, 400 V, 16 A 6+PE, 250 V, 10 A (solder version) 6+PE, 250 V, 13 A (crimp version) 3+PE, 400V, 16A 6+PE, 250V, 13A SEV UL 1) CSA 3+PE, 250 V, 12 A 6+PE, 250 V, 8 A In general approvals refer to versions of the connector series. Test report upon request. 1) Please refer to Conditions of Acceptability" 4 Amphenol Technical Data General Characteristics Standard Characteristics Number of contacts 3 + PE 6 + PE View on male mating side Electrical Characteristics 1) screw type solder type crimp type 400 V 250 V 250 V Rated voltage DIN EN 60664-1 Rated impulse withstand voltage DIN EN 60664-1 1) 6000 V Pollution degree DIN EN 60664-1 1) 3 3 Installation (overvoltage) category DIN EN 60664-1 1) III III Material group DIN EN 60664-1 1) II II Current carrying capacity DIN EN 60512-5-2, Test 5b 4000 V 13 A / + 55 C 12 A/ + 55 C 16 A / + 55 C 8 8 Insulation resistance DIN EN 60512-3-1, Test 3a 10 10 Contact resistance DIN EN 60512, Test 2a 5m 5m 40 / 100 / 56 40 / 125 / 56 -40C ... +100C -40C ... +125C Climatic Characteristics Climatic category DIN EN 60068-1 Operating temperature Mechanical Characteristics Degree of protection DIN EN 60529 Insertion and withdrawal force DIN EN 60512-13-2, Test 13b Mechanical operation DIN EN 60512, Test 9a IP 65 / IP 67 15 N 30 N 500 mating cycles Materials Housing material PA 6.6 / PA 6 Dielectric material PA 6.6 / PA 6 Neopren Gasket material Material lace for protective cap TPE silver plated / gold plated Contact plating Other Characteristics Termination technique Wire gauge / AWG screw solder crimp 0,75 - 2,5 mm2 max. 0,75 mm2 0,14 - 1,5 mm2 AWG 18-14 AWG 18 AWG 26 - 16 UL 94 Flammability VO round thread Locking system 1) DIN EN 60664-1 =^ VDE 0110-1 =^ IEC 60664-1 The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket device a reduced current carrying capacity has to be considered. The characteristics have to be requested from the manufacturer. 30,0 No. of contacts 3 + PE 25,0 all contacts under load a) wire gauge 2,5 mm b) wire gauge 1,5 mm 20,0 a) 15,0 b) 10,0 5,0 0 Amphenol 20 40 60 80 100 Ambient temperature 120 Current carrying capacity Current carrying capacity Derating Curves 30,0 No. of contacts 6 + PE 25,0 all contacts under load a) wire gauge 1,5 mm 2, stamped crimp contacts b) wire gauge 0,75 mm 2, stamped solder contacts 20,0 15,0 a) 10,0 b) 5,0 0 20 40 60 80 100 120 Ambient temperature 5 Male Cable Connectors / Female Receptacles Male cable connector straight Version strain relief with clamping ring: 6 - 12,5 mm Version with internal cable clamping and clamping ring: 6 - 10 mm No. of contacts Termination technique Back shell color 3 + PE 3 + PE 6 + PE 6 + PE 6 + PE 6 + PE screw screw solder solder crimp1) crimp1) blue black blue black blue black Part number Strain relief with clamping ring Contact plating Silver plated Gold plated C016 20H003 100 10 C016 20H003 100 12 C016 30H006 100 10 C016 30H006 100 12 C016 10H006 000 10 C016 10H006 000 12 C016 20H003 200 10 C016 20H003 200 12 C016 30H006 200 10 C016 30H006 200 12 C016 10H006 000 10 C016 10H006 000 12 Part number Internal cable clamping + clamping ring Contact plating Silver plated Gold plated C016 20H003 110 10 C016 20H003 110 12 C016 30H006 110 10 C016 30H006 110 12 C016 10H006 010 10 C016 10H006 010 12 C016 20H003 210 10 C016 20H003 210 12 C016 30H006 210 10 C016 30H006 210 12 C016 10H006 010 10 C016 10H006 010 12 Male cable connector right angled, strain relief with clamping ring cable diameter 6 - 12,5 mm No. of contacts Termination technique Back shell color 3 + PE 3 + PE 6 + PE 6 + PE 6 + PE 6 + PE screw screw solder solder crimp1) crimp1) blue black blue black blue black Part number Strain relief with clamping ring Contact plating Silver plated Gold plated C016 20K003 100 10 C016 20K003 100 12 C016 30K006 100 10 C016 30K006 100 12 C016 10K006 000 10 C016 10K006 000 12 C016 20K003 200 10 C016 20K003 200 12 C016 30K006 200 10 C016 30K006 200 12 C016 10K006 000 10 C016 10K006 000 12 Female receptacle, screw termination (3+PE), solder termination or crimp version (6+PE) Dimension A Screw version: Solder version: Crimp version: No. of contacts 3 + PE 6 + PE 6 + PE 1) 2) 6 13,5 mm 14,2 mm 16,5 mm Termination technique screw solder crimp1) Back shell color black black black Mounting Part number cut-out2) Contact plating Silver plated Gold plated C016 20G003 100 12 C016 20G003 200 12 C016 30G006 100 12 C016 30G006 200 12 C016 10G006 000 12 C016 10G006 000 12 For sealing reason this surface needs to be level and free of burrs. Crimp contacts see page 10 / Crimp tooling see catalogue "Tools". Mounting hole O 22 without chamfer, suitable sealing for screws is necessary. Tightening torque 0,8Nm. Amphenol Female Cable Connectors / Male Receptacles Female cable connector straight Bild Bi B illd d Version strain relief with clamping ring: 6 - 12,5 mm Version with internal cable clamping and clamping ring: 6 - 10 mm No. of contacts Termination technique Back shell color 3 + PE 3 + PE 6 + PE 6 + PE 6 + PE 6 + PE screw screw solder solder crimp1) crimp1) blue black blue black blue black Part number Strain relief with clamping ring Contact plating Gold plated Silver plated C016 20D003 100 10 C016 20D003 100 12 C016 30D006 100 10 C016 30D006 100 12 C016 10D006 000 10 C016 10D006 000 12 C016 20D003 200 10 C016 20D003 200 12 C016 30D006 200 10 C016 30D006 200 12 C016 10D006 000 10 C016 10D006 000 12 Part number Internal cable clamping + clamping ring Contact plating Gold plated Silver plated C016 20D003 110 10 C016 20D003 110 12 C016 30D006 110 10 C016 30D006 110 12 C016 10D006 010 10 C016 10D006 010 12 C016 20D003 210 10 C016 20D003 210 12 C016 30D006 210 10 C016 30D006 210 12 C016 10D006 010 10 C016 10D006 010 12 Female cable connector right angled, strain relief with clamping ring cable diameter 6 - 12,5 mm No. of contacts Termination technique Back shell color 3 + PE 3 + PE 6 + PE 6 + PE 6 + PE 6 + PE screw screw solder solder crimp1) crimp1) blue black blue black blue black Part number Strain relief with clamping ring Contact plating Silver plated Gold plated C016 20F003 100 10 C016 20F003 100 12 C016 30F006 100 10 C016 30F006 100 12 C016 10F006 000 10 C016 10F006 000 12 C016 20F003 200 10 C016 20F003 200 12 C016 30F006 200 10 C016 30F006 200 12 C016 10F006 000 10 C016 10F006 000 12 Male receptacle, screw termination (3+PE), solder termination or crimp version (6+PE) Dimension A Screw version: Solder version: Crimp version: No. of contacts 3 + PE 6 + PE 6 + PE 14,0 mm 12,0 mm 16,5 mm Termination technique screw solder crimp1) Back shell color black black black Mounting Part number cut-out2) Contact plating Silver plated Gold plated C016 20C003 100 12 C016 20C003 200 12 C016 30C006 100 12 C016 30C006 200 12 C016 10C006 000 12 C016 10C006 000 12 For sealing reason this surface needs to be level and free of burrs. 1) Crimp contacts see page 10 / Crimp tooling see catalogue "Tools". ) Mounting hole O 22 without chamfer, suitable sealing for screws is necessary. Tightening torque 0,8 Nm. 2 Amphenol 7 High Voltage General Characteristics Technical Data Standard Characteristics Number of contacts 3 + PE 6 + PE View on male mating side crimp type Electrical Characteristics DIN EN 60664-1 1) 600 V Rated impulse withstand voltage DIN EN 60664-1 1) 6000 V Pollution degree DIN EN 60664-1 1) Rated voltage 3 (mated) Installation (overvoltage) category DIN EN 60664-1 1) III Material group DIN EN 60664-1 1) II Current carrying capacity DIN EN 60512-5-2, Test 5b 14 A / + 40 C Insulation resistance DIN EN 60512-3-1, Test 3a 108 Contact resistance DIN EN 60512, Test 2a 5m Climatic Characteristics Climatic category DIN EN 60068-1 40 / 125 / 56 Operating temperature -40C ... +125C Mechanical Characteristics Degree of protection DIN EN 60529 IP 65 Insertion and withdrawal force DIN EN 60512-13-2, Test 13b 35 N Mechanical operation DIN EN 60512, Test 9a 500 mating cycles Materials Housing material PA 6.6 / PA 6 Dielectric material PA 6.6 / PA 6 Neopren Gasket material Contact plating silver plated / gold plated Other Characteristics crimp Termination technique 0,14 - 1,5 mm2 Wire gauge / AWG AWG 26 - 16 UL 94 Flammability VO round thread Locking system 1) DIN EN 60664-1 =^ VDE 0110-1 =^ IEC 60664-1 The stated technical values refer to the use as connector without breaking capacity (COC). If these components are used as plug and socket device a reduced current carrying capacity has to be considered. The characteristics have to be requested from the manufacturer. Testhouse Current carrying capacity Derating Curves 8 30,0 No. of contacts 6 + PE 25,0 all contacts under load wire gauge 1,5 mm 2, stamped crimp contacts 20,0 15,0 10,0 5,0 0 20 40 60 80 100 Ambient temperature 120 Characteristics 3+PE, 600 V, 13 A at AWG 16 3+PE, 600 V, 5 A at AWG 26 6+PE, 600 V, 13 A at AWG 16 6+PE, 600 V, 5 A at AWG 26 CSA 3+PE, 600 V, 10,5 A at AWG 16 6+PE, 600 V, 10,5 A at AWG 16 In general approvals refer to versions of the connector series. Test report upon request. 1) Please refer to Conditions of Acceptability" UL 1) Amphenol High Voltage Female Cable Connectors / Male Receptacles Female cable connector straight, with clamping ring, cable diameter 6 - 12,5 mm No. of contacts Termination technique Back shell color Part number Strain relief with clamping ring 3 + PE 6 + PE crimp1) crimp1) black black C016 10D003 806 12 C016 10D006 806 12 Male receptacle, crimp version No. of contacts 3 + PE 6 + PE 1) 2) Termination technique crimp1) crimp1) Back shell color black black Part number C016 10P003 806 12 C016 10P006 806 12 Mounting cut-out For sealing reason this surface needs to be level and free of burrs. Crimp contacts see page 10 / Crimp tooling see catalogue "Tools". Tightening torque 4 -5 Nm. * standard dust cups don't fit on high voltage versions special caps upon request * Thread size M20 x 1,5 2) * If turn protection is required, we recommend to glue receptacles Amphenol 9 Crimp Contacts Stamped single contacts Stamped contacts on reel for hand crimping tools 200 pcs. Stamped contacts on reel for crimping machines 2000 pcs. feeds to the left 2000 pcs. feeds to the right Crimp Contacts, Pin for Standard Versions Contact O in mm 1,6 Insulation O in mm 1,0 - 2,0 No. of contacts 6 + PE Wire gauge Supplied as 1,8 - 2,8 6 + PE Gold plated 100 VN 01 016 0011 (1) VN 01 016 0011 (2) 200 ZN 01 016 0011 (1) ZN 01 016 0011 (2) right 2000 HN 01 016 0011 (1) HN 01 016 0011 (2) left 2000 TN 01 016 0011 (1) TN 01 016 0011 (2) Single contact 100 VN 01 016 0004 (1) VN 01 016 0004 (2) Contact on reel 200 ZN 01 016 0004 (1) ZN 01 016 0004 (2) right 2000 HN 01 016 0004 (1) HN 01 016 0004 (2) left 2000 TN 01 016 0004 (1) TN 01 016 0004 (2) Supplied as Pieces 0,14 - 0,5 mm2 Single contact 0,5 - 1,5 mm2 Part number Contact plating Silver plated Contact on reel 1,6 Pieces Crimp Contacts, Pin for High Voltage Versions Contact O in mm 1,6 1,6 Insulation O in mm 1,0 - 2,0 1,8 - 2,8 No. of contacts 6 + PE 6 + PE Wire gauge 0,14 - 0,5 mm 0,5 - 1,5 mm 2 2 Part number Contact plating Silver plated Gold plated Single contact 100 VN 01 016 0003 (1) VN 01 016 0003 (2) Contact on reel 200 ZN 01 016 0003 (1) ZN 01 016 0003 (2) right 2000 HN 01 016 0003 (1) HN 01 016 0003 (2) left 2000 TN 01 016 0003 (1) TN 01 016 0003 (2) Single contact 100 VN 01 016 0002 (1) VN 01 016 0002 (2) Contact on reel 200 ZN 01 016 0002 (1) ZN 01 016 0002 (2) right 2000 HN 01 016 0002 (1) HN 01 016 0002 (2) left 2000 TN 01 016 0002 (1) TN 01 016 0002 (2) Crimp Contacts, Socket for Standard and High Voltage Version Contact O in mm 1,6 Insulation O in mm 1,0 - 2,0 No. of contacts 6 + PE Wire gauge Supplied as 1,8 - 2,8 6 + PE Gold plated 100 VN 02 016 0003 (1) VN 02 016 0003 (2) 200 ZN 02 016 0003 (1) ZN 02 016 0003 (2) right 2000 HN 02 016 0003 (1) HN 02 016 0003 (2) left 2000 TN 02 016 0003 (1) TN 02 016 0003 (2) Single contact 100 VN 02 016 0002 (1) VN 02 016 0002 (2) Contact on reel 200 ZN 02 016 0002 (1) ZN 02 016 0002 (2) right 2000 HN 02 016 0002 (1) HN 02 016 0002 (2) left 2000 TN 02 016 0002 (1) TN 02 016 0002 (2) 0,14 - 0,5 mm2 Single contact 0,5 - 1,5 mm2 Part number Contact plating Silver plated Contact on reel 1,6 Pieces Find our tools in the catalogue "Tools". 10 Amphenol Accessories Description Figure Protecitve cover for male cable connector and male receptacle Part number Figure Part number for male receptacle for male cable connector C016 00U000 000 12 C016 00U000 010 12 Protective cover for female cable connector and female receptacle for female receptacle for female cable connector C016 00V000 000 12 C016 00V000 010 12 Protective caps for 600V version upon request Mounting of the protective covers on the back shell, male or female receptacles Description Figure Back shell, right angled with clamping ring Packaging unit 10 pcs. Cable clamp for all straight cable connectors, Packaging units 10 pcs. Part number Back shell color: blue: C016 G09 042 G10 X 1) black: C016 G09 041 G10 X 1) Cable clamp diameter O 6 - 10 mm N 16 110 2000 X 1) 1) X is synonymous for packaging unit 10 pcs. Amphenol 11 Mounting Instructions Mounting Instruction, straight cable connector Stripping Lengths Measure a 1) Measure b Screw contacts 2) with internal cable clamping 18 +1 7 +1 +1 +1 2) without internal cable clamping 25 7 Solder contacts with internal cable clamping 14 +1 without internal cable clamping 22 +1 Crimp contacts 0,14 - 0,50 mm2 0,50 - 1,5 mm2 with internal cable clamping 14 +1 without internal cable clamping 22 +1 pay attention at keying 4 +1 4 +1 3 +0,5 3,5 +1 clamping ring with mounted gasket back shell tightening torque 1,5 - 2 Nm 1) PE + 2mm 2) end splice recommended internal cable clamping b a additionally included gasket male contact insert with locking ring TR 22 x 2 cable nut tightening torque 1,5 - 2 Nm 1) tightening torque max. 0,3 Nm 1) female contact insert with locking ring Mounting Instruction, right angled cable connector Stripping Lengths Measure a 1) Measure b Screw contacts 2) without internal cable clamping 35 +1 7 +1 Solder contacts without internal cable clamping 32 +1 2 Crimp contacts 0,14 - 0,5 mm 0,50 - 1,5 mm2 without internal cable clamping 32 +1 pay attention at keying 4 +1 3 +0,5 3,5 +1 1) PE + 2mm 2) end splice recommended right angled back shell tightening torque 1 - 2 Nm b a clamping ring with mounted gasket male contact insert with locking ring TR 22 x 2 shell female contact insert with locking ring 1) 12 additionally included gasket cable nut tightening torque 1,5 - 2 Nm 1) The tightening torque figures can vary depending on the cable you use. Amphenol Technical Information Order Information Color coding Backshells of cable connectors are available in different colors upon request. Min order quantity = 1000 pcs. per type. Crimp version Order number do not include crimp contacts. Please order separately (see page 10). Mechanical coding Achieved by special coding pins which are inserted into contact cavities. Min. order quantitiy = 1000 pcs. per type. Crimp tooling Ask for our catalogue "Tools" Aufbau der Bestellnummer C016 30 D 006 1 00 10 Version 10 = Cable connector in blue/black 12 = Cable connector or receptacle in black Serie Termination Technique 10 = Crimp (6 + PE) 20 = Screw (3 + PE) 30 = Solder (6 + PE) Contact Plating Strain relief Number of Poles 1 = silver plated 00 = Receptacle or cable connector with clamping ring 2 = gold plated 003 = 3 + PE 0 = without contacts 10 = Cable connector with internal 006 = 6 + PE cable clamp Style H = Male cable connector D = Female cable connector K = Right angled male cable connector The example shows a female F = Right angled female cable connector cable connector 6 + PE. C = Male receptacle G = Female receptacle P = Male receptacle Screw Termination Screw clamps are designed acc. to EN 60999-1/VDE 06095.1. Chart 1 below shows the screw size depending on wire size and the required clamping and testing torque. Chart 1 Chart 2 AWG Wire composition Wire diameter Wire size 30 1 x 0,25 7 x 0,10 1 x 0,32 7 x 0,13 1 x 0,40 7 x 0,16 19 x 0,10 1 x 0,51 7 x 0,20 19 x 0,13 1 x 0,64 7 x 0,25 19 x 0,16 1 x 0,81 7 x 0,32 19 x 0,20 1 x 1,02 19 x 0,25 19 x 0,29 19 x 0,36 19 x 0,46 37 x 0,40 133 x 0,29 133 x 0,36 0,05 mm2 0,06 mm2 0,08 mm2 0,09 mm2 0,13 mm2 0,14 mm2 0,15 mm2 0,21 mm2 0,23 mm2 0,24 mm2 0,33 mm2 0,36 mm2 0,38 mm2 0,52 mm2 0,56 mm2 0,62 mm2 0,79 mm2 0,96 mm2 1,23 mm2 1,95 mm2 3,09 mm2 4,60 mm2 8,80 mm2 13,5 mm2 28 Wire size (mm2) 1,5 2,5 Screw size M3 M3 max. 50 max. 50 Test torque (Ncm) Diagram 1 below shows the range of tensile strength for a screw connection with a clamp screw M3, fastened with a torque of 50 Ncm, depending on the wire size. 26 24 22 Diagram 1 Tensile strength 20 18 Wire gauge This comparison chart allows a cross reference between American Wire Gauge (AWG) and metric wire sizes (mm2). Amphenol 16 14 12 10 8 6 0,25 mm 0,36 mm 0,32 mm 0,38 mm 0,40 mm 0,48 mm 0,51 mm 0,51 mm 0,61 mm 0,64 mm 0,64 mm 0,76 mm 0,81 mm 0,81 mm 0,97 mm 1,02 mm 1,02 mm 1,27 mm 1,44 mm 1,80 mm 2,29 mm 3,10 mm 4,0 mm 5,5 mm It is to be noted that wires of the same AWG number but with different composition have slightly different mm2. 13 Technical Information Crimp Termination Assembly instructions For crimp contacts use the released crimp tool. A crimp connection is a non-detachable electrical connection between a wire and a crimp contact produced with the crimp technology. Precise crimping dies which are matched to the crimp barrel and the wire size and a defined deformation result in a reliable electrical connection. There are open crimp barrels (stamped contacts) and closed crimp barrels (turned contacts). The insertion and extraction of crimp contacts shall only be approved with the corresponding insertion/extraction tool. A detailed description of the crimp technology can be found in our crimp tooling catalogues. The main advantages of crimp connections are: * Efficient termination of contacts * Reproducible terminations achieve consistent electrical and mechanical results Crimp contacts are in this catalogue on page 10. The requirements for crimp connections are defined in IEC 60352 Part 2 / DIN EN 60352 Part 2. An important point of the quality of a crimp connection is the achieved tensile strength of the termination. Easily measured, the tensile strength is a practible means for quality control purposes. Diagram 2 below shows the required minimum tensile strength for open and closed barrels depending on the wire size. Diagram 2 N lb 1000 4000 3000 500 400 2000 300 1000 500 400 100 300 50 40 200 30 Min. tensile strength lb Min. tensile strength N 200 100 20 50 40 10 30 5 mm2 0,05 AWG 0,1 0,2 28 26 24 22 0,5 20 1,0 1,5 2,5 4,0 6,0 12 10 14 18 16 10,0 8 20 Wire gauge in mm2 / AWG 14 Amphenol Technical Information Degree of Protection Electrical devices to which connectors belong to have to be protected for safety reasons from outside influences like dust, foreign objects, direct contact, moisture and water. This protection is provided on industrial connectors by its housings with their latching devices and sealed cable entries. The degree of protection can be selected depending on the type of intended use. The standard IEC 60529 and/or DIN EN 60529/VDE 0470 Part 1 has specified the degree of protection and divided into several classes. Chart 5 2nd charact. Brief description numeral Definition 0 Non-protected - 1 Protected against vertically Vertically falling drops shall have no harmful effects. falling water drops 2 Protected against vertically Vertically falling drops shall falling water drops when have no harmful effects when enclosure tilted up to 15 the enclosure is tilted at any angel up to 15 on either side of the vertical. 3 Protected against spraying Water sprayed at an angle up water to 60 on either side of the vertical shall have no harmful effects. 4 Protected against splashing Water splashed against the enclosure from any direction water shall have no harmful effects. 5 Protected against water jets Water projected in jets against the enclosure from any direction shall have no harmful effects. 6 Protected against powerful Water projected in powerful jets against the enclosure water jets from any direction shall have no harmful effects. 7 Protected against the effects Intrusion of water in quantities of temporary immersion in causing harmful effects shall not be possible when water the enclosure is temporalily immersed in water for 30 min. in 1m depth. 8 Protected against the effects Intrusion of water in quantities of continous immersion in causing harmful effects shall water not be possible when the enclosure is continuously immersed in water under conditions which shall be agreed between manufacturer and user but which are more severe than for numeral 7. 9K 1) Protected against water Water projected in powerful during high pressure/steam jets with high pressure against jet cleaning the enclosure from any direction shall have no harmful effects. The degree of protection is indicated in the following way: IP65 Code letters (Internat. Protection) 1st charact. numeral (degree of protection against access to hazardous parts and against solid foreign objects) 2nd charact. numeral (degree of protection against ingress of water) The following charts 4 an 5 give an overview about all protection degrees. Chart 4 1st charact. Brief description numeral Definition 0 Non-protected - 1 Protected against access to hazardous parts with the back of a hand. Protected against solid foreign objects of 50mm O. The probe, sphere of 50mm O, shall not fully penetrate and shall have adequate clearance from hazardous parts. Protected against access to hazardous parts with a finger. Protected against solid foreign objects of 12,5mm O. The jointed test finger of 12mm O, 80mm length, shall have adequate clearance from hazardous parts. The probe, sphere of 12,5mm O, shall not fully penetrate. 2 3 Protected against access The probe of 2,5mm O shall to hazardous parts with a not penetrate at all. tool. Protected against solid foreign objects of 2,5mm O. 4 Protected against access to The probe of 1mm O shall hazardous parts with a wire. not penetrate at all. Protected against solid foreign objects of 1mm O. 5 Protected against access to The probe of 1mm O shall hazardous parts with a wire. not penetrate. Intrusion of dust is not Dust-protected. totally prevented, but dust shall not penetrate in a quantity to interfere with satisfactory operation of the device or to impair safety. 6 Protected against access to The probe of 1mm O shall hazardous parts with a wire not penetrate. Dust-tight. No intrussion of dust. 1) Amphenol Remark: Numeral acc. to DIN 40050 part 9, vehicles IP code. 15 Remarks / Safety Classification 1. General Remarks These connectors are designed and produced in conformity with the low voltage directive (73/23/EWG) respectively Geratesicherheitsgesetz (German law) and are especially in accordance with the standards DIN EN 61984 / IEC 61984 (VDE0627); IEC 60664-1 (VDE 0110-1) and IEC 60529. The connectors may be used only within the technical ratings. All technical data refer to mated connectors under live conditions. The safety of the connector system depends on the correct selection of products, proper assembly of the connector device and a precise fit of the connectors. 2. Application Remarks Connectors with / without breaking capacity must be used according to specified technical ratings. The technical data represents the initial value of mated parts under predetermined conditions and length of time.These values could change with different test parameters or product requirements. The connectors of the series are designed for the areas of application including the construction and installation of controlling and electrical devices. The product has been tested for the intended purposes only. If the connection is used other than originally intended, or in another manner that we have not previously tested, the consumer assumes full responsibility. 16 All rated data for the connectors listed in this catalogue are based on overvoltage category III and pollution degree 3 for electronic applications if not stated differently. Connectors were completely mated according to their respective safety locking mechanism. Selection and testing of connectors with / without breaking capacity to meet specific product or industrial requirements such as rated voltage and the related clearances and creepage distances are the responsibility of the user. 3. Assembling Remarks Protection against electrical shock of the termination of the connectors shall be secured by correct mounting. Connectors of the same or different series being mounted side by side may be protected against incorrect mating by the use of coding options. Care must be taken to ensure the parts are correctly mated and screws are tightened with the proper torque. 4. Termination Remarks Cable connectors are effectively secured when using the strain relief (internal clamping ring). All cable properties or specifications must becompatible with the connector design and materials. Please make sure that the usability of the cable in conjunction with the clamping ring is given. Designated wire conductors must be terminated to the correct poles in the connector. Crimp contacts must be fully inserted into the plastic housing and strain relief assured with a slight tug on the wire. Wire should be stripped correctly according to printed specifications to insure no electrical contact can be made between the conductors. There should be no nicked or cut strains during the stripping action. Amphenol Summary of Part Numbers Part No. Page Part No. Page Part No. Page Part No. Page C016 00U000 000 12 11 C016 20F003 100 12 7 C016 30H006 100 10 6 TN 01 016 0011 (1) 10 C016 00U000 010 12 11 C016 20F003 200 10 7 C016 30H006 100 12 6 TN 01 016 0011 (2) 10 C016 00V000 000 12 11 C016 20F003 200 12 7 C016 30H006 110 10 6 TN 02 016 0002 (1) 10 C016 00V000 010 12 11 C016 20G003 100 12 6 C016 30H006 110 12 6 TN 02 016 0002 (2) 10 C016 10C006 000 12 7 C016 20G003 200 12 6 C016 30H006 200 10 6 TN 02 016 0003 (1) 10 C016 10D003 806 12 9 C016 20H003 100 10 6 C016 30H006 200 12 6 TN 02 016 0003 (2) 10 C016 10D006 000 10 7 C016 20H003 100 12 6 C016 30H006 210 10 6 VN 01 016 0002 (1) 10 C016 10D006 000 12 7 C016 20H003 110 10 6 C016 30H006 210 12 6 VN 01 016 0002 (2) 10 C016 10D006 010 10 7 C016 20H003 110 12 6 C016 30K006 100 10 6 VN 01 016 0003 (1) 10 C016 10D006 010 12 7 C016 20H003 200 10 6 C016 30K006 100 12 6 VN 01 016 0003 (2) 10 C016 10D006 806 12 9 C016 20H003 200 12 6 C016 30K006 200 10 6 VN 01 016 0004 (1) 10 C016 10F006 000 10 7 C016 20H003 210 10 6 C016 30K006 200 12 6 VN 01 016 0004 (2) 10 C016 10F006 000 12 7 C016 20H003 210 12 6 C016 G09 041 G10 X 11 VN 01 016 0011 (1) 10 C016 10G006 000 12 6 C016 20K003 100 10 6 C016 G09 042 G10 X 11 VN 01 016 0011 (2) 10 C016 10H006 000 10 6 C016 20K003 100 12 6 HHN 01 016 0002 (1) 10 VN 02 016 0002 (1) 10 C016 10H006 000 12 6 C016 20K003 200 10 6 HN 01 016 0002 (2) 10 VN 02 016 0002 (2) 10 C016 10H006 010 10 6 C016 20K003 200 12 6 HN 01 016 0003 (1) 10 VN 02 016 0003 (1) 10 C016 10H006 010 12 6 C016 30C006 100 12 7 HN 01 016 0003 (2) 10 VN 02 016 0003 (2) 10 C016 10K006 000 10 6 C016 30C006 200 12 7 HN 01 016 0004 (1) 10 ZN 01 016 0002 (1) 10 C016 10K006 000 12 6 C016 30D006 100 10 7 HN 01 016 0004 (2) 10 ZN 01 016 0002 (2) 10 C016 10P003 806 12 9 C016 30D006 100 12 7 HN 01 016 0011 (1) 10 ZN 01 016 0003 (1) 10 C016 10P006 806 12 9 C016 30D006 110 10 7 HN 01 016 0011 (2) 10 ZN 01 016 0003 (2) 10 C016 20C003 100 12 7 C016 30D006 110 12 7 HN 02 016 0002 (1) 10 ZN 01 016 0004 (1) 10 C016 20C003 200 12 7 C016 30D006 200 10 7 HN 02 016 0002 (2) 10 ZN 01 016 0004 (2) 10 C016 20D003 100 10 7 C016 30D006 200 12 7 HN 02 016 0003 (1) 10 ZN 01 016 0011 (1) 10 C016 20D003 100 12 7 C016 30D006 210 10 7 HN 02 016 0003 (2) 10 ZN 01 016 0011 (2) 10 C016 20D003 110 10 7 C016 30D006 210 12 7 N 16 110 2000 X 11 ZN 02 016 0002 (1) 10 C016 20D003 110 12 7 C016 30F006 100 10 7 TN 01 016 0002 (1) 10 ZN 02 016 0002 (2) 10 C016 20D003 200 10 7 C016 30F006 100 12 7 TN 01 016 0002 (2) 10 ZN 02 016 0003 (1) 10 C016 20D003 200 12 7 C016 30F006 200 10 7 TN 01 016 0003 (1) 10 ZN 02 016 0003 (2) 10 C016 20D003 210 10 7 C016 30F006 200 12 7 TN 01 016 0003 (2) 10 C016 20D003 210 12 7 C016 30G006 100 12 6 TN 01 016 0004 (1) 10 C016 20F003 100 10 7 C016 30G006 200 12 6 TN 01 016 0004 (2) 10 Amphenol 17 For Notes 18 Amphenol For Notes Amphenol 19 International Germany Amphenol-Tuchel Electronics GmbH August-Haeusser-Str. 10 74080 Heilbronn Phone +49 7131 929 0 www.amphenol.de Singapore Asia Pacific Sales Operations 72 Bendemeer Rd, No.03-32/33 Hiap Huat House, Luzerne, 339941 Singapore Phone +65 6294 2128 www.amphenol.com Turkey Amphenol Turkey Sun Plaza Kat: 15 Maslak Mah. Bilim Sok.No:15 34398 Sisli - Istanbul Phone: +90 2123 679 220 www.amphenol.com.tr Australia Amphenol Australia Pty. Ltd. 2 Fiveways Blvd Keysborough Victoria 31 73 Phone +61 3 8796 88 88 www.amphenol.com.au India Amphenol Interconnect India Pvt Ltd 105, Bhosari Industrial Area Pune - 411 026 Phone +91 20 2712 04 81 www.amphenol-in.com South Africa Amphenol International Ltd Chislehurston 30 Impala Road 2196 Chislehurston Sandton, 2146 Phone +27 11 7839 517 www.amphenol.co.za United Kingdom Amphenol Limited Thanet Way, Whitstable Kent, CT53JF Phone +44 1227 773 200 www.amphenol.co.uk Brazil Amphenol do Brasil Ltda. Rua Diogo Moreira 132, 20th Floor CEP 05423-101 Sao Paulo SP Phone +55 11 3815 10 03 www.amphenol.com.br Italy Amphenol-Tuchel Italy Via Barbaiana n. 5 20020 Lainate (MI) Phone +39 02 9325 41 www.amphenol.info Spain Amphenol Espana Edificio Burgosol, Oficina 55 C/Comunidad de Madrid, 35 bis Las Rozas (Madrid), 28230 Phone +34 91 6407 302 www.amphenol.com USA Amphenol-Tuchel Electronics 6900 Haggerty Road Suite 200 Canton, Michigan 48187 Phone +1 7344 516 400 www.amphenol.info China Amphenol-Tuchel Electronics China Branch 20 Taishan Road Changzhou 213022 Phone +86 0519 511 03 01 www.amphenol.info Korea Amphenol DaeShin Elect and Precision Co.,Ltd 558 Songnae-Dong, Sosa-Gu Bucheon-City, Kyunggi-Do Korea 422-130 Phone +82 32 6103 800 www.amphenol.co.kr Taiwan Amphenol East Asia Limited-Taiwan 5F, No 361, Fusing 1st Rd Gueishan Township, Taoyuan County 333 Phone +886 3 2647 200 www.amphenol.com Amphenol Corporation Corporate Headquarters 358 Hall Avenue Wallingford, CT 06492 Phone +1 877 2674 366 Phone +1 203 2658 900 www.amphenol.com France Amphenol Socapex S.A.S. 948, Promenade de l'Arve, BP 29 Thyez Cedex, 74311 Phone +33 4 5089 28 00 www.amphenol-socapex.com Mexico Amphenol Mexico Prolongacion Reforma 61 - 6 B2 Col. Paseo de las Lomas C.P. 01330 Mexico D.F. Phone +52 55 5258 99 84 www.amphenolmexico.com More Amphenol companies can be found here: www.amphenol.com Important Notice All technical data have been measured in a laboratory environment and can be different during practical usage of the product. Any product information is for descriptive usage only and not legally binding; particularly the information does not constitute or provide any legal guaranties ("Beschaffenheitsgarantie" or "Haltbarkeitsgarantie"). We reserve the right to change the design due to improvement in quality, development or production requirements. This catalogue must not be used in any form or manner without our prior approval in writing (Copyright Law, Fair Trading Law, Civil Code). Your engineering sales representative: Amphenol-Tuchel Electronics GmbH | August - Haeusser Strasse 10 | 74080 Heilbronn, Germany Telephone: +49 (0)7131 929 - 0 | Fax: +49 (0)7131 929 - 486 | www.amphenol.info ATE 2201 F 0612 / 2000 0712 Printed on chlorin-free bleached paper, specifications may be changed without notice. Copyright by Amphenol-Tuchel Electronics GmbH, Germany Argentina Amphenol Argentina Av. Callao 930 2nd Floor Office B "Plaza" C1023 AAP Buenos Aires Phone +54 11 4815 68 86 www.amphenol.com.ar