B234
1.25mm Pitch Super Low profile Crimping Connector
DF14 Series
■Features
1. Super Low Profile
This is a connector special for right angle which has pursued a low
profile on the board.
Board mounting height: 2.5mm
A signal can be fetched from the area where there is no board to
board space. (Refer to fig.1)
Offset type is available.
Board mounting height: 1.6mm (Refer to fig.2)
2. Correspond to Automatic Mounting
The header has the vacuum mount face which enables the vacuum
absorption and the automatic mounting by the embossed tape
packaging.
In addition, the tube packaging can be selected.
3. Four Wall Type Without Friction to Board by Socket
The header has the box structure to prevent from being twisted and
has the perfect mis-insertion prevention method. Moreover the
header has the wall on the board side and doesn't have any trouble
resulted from the friction to board by socket.
In addition, the metal fitting is attached to prevent the solder peel.
■Applications
LCD, Note PC, Mobile Terminal Small business equipment, Video
camera
Board Mounting Figure
DF14(A)
(7.3)
(1)
(1.6)
(2.4)
Board Mounting Figure
fig.2DF14H
fig.1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B235
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
●Contact
Applicable cable size
2628: AWG26 to 28
3032: AWG30 to 32
Packaging Type
SCF: Socket contact/reel
Plating Type
Blank: Tin plated
A: Gold plated
DF14 - 2628 SCF A
1 2 3
2
3
■Product Specifications
Current rating 1A
Voltage rating 150V AC
Operating Temperature Range -35 to +85ç(Note 1)
Operating Moisture Range 40 to 80% Storage Temperature Range -10 to +60ç(Note 2)
Storage Moisture Range 40 to 70% (Note 2)
Item Specification Condition
1. Insulation Resistance 500M ohms Min 100V DC
2. Withstanding voltage No flashover or insulation breakdown. 500V AC/1 minute
3. Contact Resistance 30m ohms Max 100mA
4.
Insertion/Extraction Force
MIN0.15N (15gf), MAX3N (300gf) Measure at the square steel pin of 0.3
±
0.002mm
5. Vibration No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
6.
Humidity (Steady state)
Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min
96 hours at temperature of 40ç and humidity of 90% to 95%
7. Temperature Cycle
Contact resistance: 30m ohms Max Insulation resistance: 500M ohms Min
(-25ç: 30 minutes➝5 to 35ç: 10 minutes➝85ç: 30 minutes➝
5 to 35
ç
: 10 minutes) 5 cycles
8.
Durability (Mating/un-mating)
Contact resistance: 30m
ohms
Max Tin plating: 30 cycles Gold plating: 50 cycles
9.
Resistance to Soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 300ç for 3 seconds
Rating
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
■Material
Product Part Material Finish Remarks
Crimping Socket Insulator Polyamide Beige UL94V-0
Crimping Contact for Socket
Contact Phosphor Copper
Tin-copper plated or gold plated
–––––––
Insulator Polyamide Beige UL94V-0
Pin Header Contact Brass
Tin-copper plated or gold plated
–––––––
Fitting Phosphor copper Tin-copper plated –––––––
■Ordering Information
1
●Connector
1
2
3
Series Name: DF14
Blank: Standard, with boss
A: on-board, without boss
H: offset
Number of Contacts: 2 to 10, 15, 20, 25, 30
Connector Type
S: Single row socket
P: Single row pin header
Contact Pitch: 1.25mm
Contact Type
C: Crimping socket
H: Right angle SMT
4
5
6
1
DF 14 # - * S - 1.25 C
32 4 5 6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B236
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
■Crimping Socket
K
Applicable Cable (Tin plating Annealed copper wire)
Conductor Size (Wire construction) Jacket Diameter
AWG26(7 cores/0.16mm)
AWG28(7 cores/0.127mm) Ø0.54 to Ø1mm
AWG30(7 cores/0.1mm)
AWG32(7 cores/0.08mm)
K
Recommended Cable
UL1571
KStrip Length
1.2 to 1.9mm
BApplicable Crimping Tool
Note:If other cables are used instead of the applicable cable, contact Hirose
sales department.
Type Part Number CL No. Applicable Contact
Applicator AP105-DF14-2628S 901-4548-1 DF14-2628SCF/SCFA
AP105-DF14-3032S 901-4544-0 DF14-3032SCF/SCFA
Press Main Unit CM-105 901-0005-4 ---------------------------------------------
Manual Crimping Tool
DF14-2628/CR-HT 550-0261-1 DF14-2628SCF/SCFA
DF14-3032/CR-HT 550-0262-4 DF14-3032SCF/SCFA
Note 1.If a trouble has occurred due to tools, which are not designated by Hirose, Hirose won't guarantee any product.
Note 2.Use the reel contact sequentially cut for manual crimping tool.
Part Number CL No.
Packaging Type
Quantity Finish RoHS
DF14-2628SCF 538-0001-7-** Reel Tin plated
DF14-3032SCF 538-0003-2-** Reel 10,000 Yes
DF14-2628SCFA 538-0002-0-** Reel
Gold plated
DF14-3032SCFA 538-0004-5-** Reel
■Socket Crimping Contact
Note 1.The quantity is delivered per bag(100 pcs). If needed, please order the products per bag.
Part Number CL No. Number of Contacts A B RoHS
DF14- 2S-1.25C 538-0005-8 2 4.45 1.25
DF14- 3S-1.25C 538-0006-0 3 5.70 2.50
DF14- 4S-1.25C 538-0007-3 4 6.95 3.75
DF14- 5S-1.25C 538-0008-6 5 8.20 5.00
DF14- 6S-1.25C 538-0009-9 6 9.45 6.25
DF14- 7S-1.25C 538-0010-8 7 10.70 7.50
DF14- 8S-1.25C 538-0011-0 8 11.95 8.75 Yes
DF14- 9S-1.25C 538-0013-6 9 13.20 10.00
DF14-10S-1.25C 538-0014-9 10 14.45 11.25
DF14-15S-1.25C 538-0054-3 15 20.70 17.50
DF14-20S-1.25C 538-0059-7 20 26.95 23.75
DF14-25S-1.25C 538-0064-7 25 33.20 30.00
DF14-30S-1.25C 538-0012-3 30 39.45 36.25
Unit: mm
Photo: Contact insertion state
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B237
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
With boss Without boss
Part Number CL No. Part Number CL No. ABCD
DF14- 2P-1.25H(**) 538-0021-4-** DF14A- 2P-1.25H(**) 538-0033-3-** 2 7.45 1.25 6.45 8.05 66
DF14- 3P-1.25H(**) 538-0022-7-** DF14A- 3P-1.25H(**) 538-0034-6-** 3 8.70 2.50 7.70 9.30 56
DF14- 4P-1.25H(**) 538-0023-0-** DF14A- 4P-1.25H(**) 538-0035-9-** 4 9.95 3.75 8.95 10.55 49
DF14- 5P-1.25H(**) 538-0024-2-** DF14A- 5P-1.25H(**) 538-0036-1-** 5 11.20 5.00 10.20 11.80 44
DF14- 6P-1.25H(**) 538-0025-5-** DF14A- 6P-1.25H(**) 538-0037-4-** 6 12.45 6.25 11.45 13.05 39
DF14- 7P-1.25H(**) 538-0026-8-** DF14A- 7P-1.25H(**) 538-0038-7-** 7 13.70 7.50 12.70 14.30 36
DF14- 8P-1.25H(**) 538-0027-0-** DF14A- 8P-1.25H(**) 538-0039-0-** 8 14.95 8.75 13.95 15.55 32
DF14- 9P-1.25H(**) 538-0028-3-** DF14A- 9P-1.25H(**) 538-0040-9-** 9 16.20 10.00 15.20 16.80 30
DF14-10P-1.25H(**) 538-0029-6-** DF14A-10P-1.25H(**) 538-0041-1-** 10 17.45 11.25 16.45 18.05 28
DF14-15P-1.25H(**) 538-0084-4-** DF14A-15P-1.25H(**) 538-0114-3-** 15 23.70 17.50 22.70 24.30 20
DF14-20P-1.25H(**) 538-0089-8-** DF14A-20P-1.25H(**) 538-0119-7-** 20 29.95 23.75 28.95 30.55 16
DF14-25P-1.25H(**) 538-0094-8-** DF14A-25P-1.25H(**) 538-0124-7-** 25 36.20 30.00 35.20 36.80 13
DF14-30P-1.25H(**) 538-0020-1-** DF14A-30P-1.25H(**) 538-0045-2-** 30 42.45 36.25 41.45 43.05 11
Note 1.Please order the tube packaging product, multiplying the packaging quantity (pcs.).
Note 2.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel)
Unit: mm
[Specific No.]–**,(**)
(25):
Tin-copper plated tube packaging
(26):
Tin-copper plated embossed tape packaging
(55): Gold plated tube packaging
(56):
Gold plated embossed tape packaging
BPCB mounting pattern BTube Packaging Dimensions
■Right Angle Pin Header (SMT)
Note 1."Without boss" indicates the style with no boss.
Note 2."Without boss" indicates that no hole is needed.
Tube
Packaging
Quantity
Number
of
Contacts
RoHS
Yes
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B238
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
Note 1.Please order the embossed tape packaging product according to reel number. (1000 pcs./reel)
[Specific No.]–**,(**)
(56):
Gold plated embossed tape packaging
BPCB mounting pattern
■Right Angle Pin Header (Offset, SMT)
B
C
P=1.25
A
0.3
2.4 5.7 1.6
0.8
Contact No. 1
P=1.25±0.05
A±0.05
D+0.2
0
(0.5)
1.3+0.2
0
3.6±0.1
(0.3) (0.4)
6.7±0.1 1.4±0.1(0.5)
0.7±0.05
Unit: mm
Part Number CL No.
DF14H-02P-1.25H(**)
DF14H-20P-1.25H(**)
DF14H-30P-1.25H(**)
538-0177-3
-**
538-0167-0
-**
538-0188-0
-**
2
30
30
1.25
23.75
36.25
Number of Contacts
A6.8
29.3
41.8
B10.1
32.6
45.1
7.2
29.7
42.2 Yes
C D RoHS
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B239
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
BEmbossed Carrier Tape Dimensions (JIS-C-0806)
■2 to 10 Contacts ■15, 20, 25, 30 Contacts
Inserted Connector Number of Contacts A B C D
DF14/14A- 2P-1.25H 2 16 7.5 16.4
–––
DF14/14A- 3P-1.25H 3 16 7.5 16.4
–––
DF14/14A- 4P-1.25H 4 24 11.5 24.4
–––
DF14/14A- 5P-1.25H 5 24 11.5 24.4
–––
DF14/14A- 6P-1.25H 6 24 11.5 24.4
–––
DF14/14A- 7P-1.25H 7 24 11.5 24.4
–––
DF14/14A- 8P-1.25H 8 24 11.5 24.4
–––
DF14/14A- 9P-1.25H 9 24 11.5 24.4
–––
DF14/14A-10P-1.25H 10 24 11.5 24.4
–––
DF14/14A-15P-1.25H 15 44 20.2 44.4 40.4
DF14/14A-20P-1.25H 20 44 20.2 44.4 40.4
DF14/14A-25P-1.25H 25 56 26.2 56.4 52.4
DF14/14A-30P-1.25H 30 56 26.2 56.4 52.4
Unit: mm
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B240
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
BEmbossed Carrier Tape Dimensions (JIS-C-0806)
DF14H-*P- 1.25H
■2 Contacts ■20, 30 Contacts
Inserted Connector Number of Contacts A B C D
DF14H- 2P-1.25H 2 24 11.5 24.4
–––
DF14H- 20P-1.25H 20 44 20.2 44.4 40.4
DF14H- 30P-1.25H 30 56 26.2 56.4 52.4
Unit: mm
0.3±0.1
+0.1
0
Unreeling direction
B — B
C — C
B
B
C
C
12±0.1
2±0.1
4±0.1
1.75±0.1
A±0.3
B±0.1
(3)
Ø1.5
Unreeling direction
0.3±0.1
(3)
12±0.1
2±0.1
4±0.1
1.75±0.1B±0.1
D±0.1
A±0.3
Ø1.5
+0.1
0
(Ø80)
Ø330±2
Product name label
2±0.5
Ø21±0.8
Ø13±0.5
C+2
0
(C+6)MAX
Ø1.5 Lead hole depth
A
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B241
DF14 Series●1.25mm Pitch Super Low profile Crimping Connector
1.
Recommended Temperature Profile (SMT)
Note 1.Up to 2 cycles of Reflow soldering are possible under the same conditions, provided
that there is a return to normal temperature between the first and second cycle.
Note 2.The temperature profile indicates the board surface temperature at the point of
contacts with the connector terminals.
2.
Recommended Manual Soldering Condition (SMT)
Manual soldering: 290ç for 2 seconds
3.
Recommended Screen Thickness (SMT)
0.15 to 0.2mm
4. Board Sled (SMT) Max 0.03mm at the connector center area, based on both connector edges
5. Cleaning Condition Refer to Nylon Connector Use Hand book.
6. Connection Condition Refer to Nylon Connector Use Hand book.
■Be careful to carry out the crimping operation according to the "Crimping Condition Sheet"
and "Crimping Quality Reference", because the crimping contact style is too small.
7. Precautions Refer to Nylon Connector Use Hand book.
8. Cautions ■Be careful for an excessive scoop insertion/extraction, which will cause damage to the
product.
BPrecautions
BPrecautions
DiagonalParallel
DiagonalParallel
DiagonalParallel
DiagonalParallel
100ç
150ç
200ç
250ç Max. 240
220
Time
Temperature 10s max.
60 to 120s
Preheating
60s max.
Soldering
IR reflow condition
Preheating area
150ç for 60 to 120 seconds
Soldering area 250 for 10 seconds max.
220ç min. 60 seconds max.
Precautions at Time of InsertionPrecautions at Time of Disconnection
Handling
Method: Lightly grasping the base of the cable, press the
connector with your finger and insert it.
Handling
Method: Grasp the cable so that the entire cable is pulled
evenly and pull it out.
Insertion Angle
[Caution] Do not insert at an angle of 30° or greater. Doing so
will cause contact deformation or case damage.
Method: Insert with the connector parallel.
Angle of Removal
[Caution] Do not remove at an angle of 30° or greater. Doing so
will cause contact deformation or case damage.
Method: Remove with the connector parallel.
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
