UF1000F – UF1008F 1 of 4 © 2006 Won-Top Electronics
Pb
UF1000F – UF1008F
10A GLASS PASSIVATED ULTRAFAST RECTIFIER
Features
Glass Passivated Die Construction B
Ultra-Fast Switching
Low Forward Voltage Drop C
Low Reverse Leakage Current
High Surge Current Capability G A
Plastic Material has UL Flammability
Classification 94V-O PIN1 3
D
Mechanical Data F E
Case: ITO-220A, Full Molded Plastic
Terminals: Plated Leads Solderable per P
MIL-STD-202, Method 208
Polarity: See Diagram I
Weight: 2.24 grams (approx.)
Mounting Position: Any H L
Mounting Torque: 11.5 cm-kg (10 in-lbs) Max.
Lead Free: For RoHS / Lead Free Version,
Add “-LF” Suffix to Part Number, See Page 4
PIN 1 +
J PIN 3 -
K
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Characteristic Symbol UF
1000F UF
1001F UF
1002F UF
1003F UF
1004F UF
1006F UF
1008F Unit
Peak Repetitive Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR 50 100 200 300 400 600 800 V
RMS Reverse Voltage VR(RMS) 35 70 140 210 280 420 560 V
Average Rectified Output Current @TC = 100°C IO 10 A
Non-Repetiti ve Peak Forward Surge Current 8.3ms
Single half sine-wave superim posed on rated load
(JEDEC Method) IFSM 150 A
Forward Voltage @IF = 10A VFM 1.0 1.3 1.7 V
Peak Reverse Current @T
A = 25°C
At Rated DC Blocking Voltage @TA = 125°C IRM 10
500 µA
Reverse Recovery Time (Note 1) trr 50 100 nS
Typi cal Junction Capacitance (Note 2) Cj 80 50 pF
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured with IF = 0.5A, IR = 1.0A, IRR = 0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D. C.
WTE
POWER SEM IC ON DUC TOR S
ITO-220A
Dim Min Max
A 14.60 15.40
B 9.70 10.30
C 2.55 2.85
D 3.56 4.16
E 13.00 13.80
F 0.30 0.90
G 3.00 Ø 3.50 Ø
H 6.30 6.90
I 4.20 4.80
J 2.50 2.90
K 0.36 0.80
L 2.90 3.30
P 4.83 5.33
All Dimensions in mm
UF1000F – UF1008F 2 of 4 © 2006 Won-Top Electronics
30
60
90
0
120
150
180
1 10 100
I , PEAK FORWARD SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60Hz
Fig. 3 Max Non-Repetitive Surge Current
8.3 ms single half-sine-wave
JEDEC method
10
100
400
0.1 1.0 10 100
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance
R
1006F -1008F
1000F -1004F
C, CAPACITANCE (pF)
j
0
2
4
6
8
10
0 50 100 150
I,AVERAGEFORWARDCURRENT(A)
(AV)
T , CASE TEMPERATURE ( C)
Fig. 1 Forward Current Derating Curve
C°
0.1
1.0
10
100
0.2 0.6 1.0 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics
F
Pulse width = 300 s
2% duty cycle µ
1006F -1008F
1003F - 1004F
1000F -1002F
UF1000F – UF1008F 3 of 4 © 2006 Won-Top Electronics
MARKING INFORMATION
PACKAGING INFORMATION
Tube Size
L x W x H (mm) Quantity
(PCS) Inner Box Size
L x W x H (mm) Quantity
(PCS) Carton Size
L x W x H (mm) Quantity
(PCS) Approx. Gross Weight
(KG)
525 x 31 x 6 50 555 x 145 x 95 2, 000 572 x 306 x 218 8,000 19.0
RECOMMENDED SCREW MOUNTING ARRANGEMENT
Note: 1. Anti-static tube, water clear color.
BULK
WTE = Manufacturer’s Logo
UF100xF = Device Number
x = 0, 1, 2, 3, 4, 6 or 8
Polarity = As Marked on Body
Plain Washe
r
Rectifie
r
Heatsink
Conical Washe
r
6-32 HEX Nut
The full molded plastic package affords a
major reduction of hardware as compared
to a standard TO-220 package. However,
precautions should be made in mounting
procedure.
A conical washer should be used to apply
proper force to the device. Screw should
not be tightened with any type of air-forced
torque or equipment that may cause crack
on device package.
A layer of thermal grease or thermal pad in
the interface will be considerably helpful for
heat dissipation.
6-32 HEX Head Scre
w
WTE
UF100xF
UF1000F – UF1008F 4 of 4 © 2006 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
UF1000F ITO-220A 50 Units/Tube
UF1001F ITO-220A 50 Units/Tube
UF1002F ITO-220A 50 Units/Tube
UF1003F ITO-220A 50 Units/Tube
UF1004F ITO-220A 50 Units/Tube
UF1006F ITO-220A 50 Units/Tube
UF1008F ITO-220A 50 Units/Tube
1. Shipping quantity given is for minimum packing quantity only. For minimum
order quantity, please consult the Sales Department.
2. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix
to part number above. For example, UF1000F-LF.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer . WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www. wontop.com
