L1C1-BLU1000000000 - Lumileds

ILLUMINATION

No. E352519

The LUXEON C Line is an optically advanced portfolio of Color and

White LEDs. Designed for awless color mixing, LUXEON C Color Line

has one focal length for all colors, which provides consistent radiation

patterns from secondary optics and maximizes optical eciency. With

low dome design, it keeps eective source size small while still improving

light extraction. Designed for smooth color mixing and maximum punch,

LUXEON C Color Line is the optimal LED solution for architecture,

emergency vehicle lighting and horticulture lighting applications.

LUXEON C Color Line

Multiple colors, a single focal length

FEATURES AND BENEFITS PRIMARY APPLICATIONS

One focal length allows awless color mixing, maximum optical eciency

and removes halos Architectural

Low dome design eliminates trade-os between ux and source size Lamps

Hot tested—removes guesswork for designers – Color Tunable

Industry’s lowest thermal resistance means greater light output

and lower heatsink costs Specialty Lighting

Small symmetrical 2x2mm² package enables dense packing and

limits the impact of rotation during reow – Emergency Vehicle

– Horticulture

Table of Contents

General Product Information ......................................................................2

Product Test Conditions ..............................................................................2

Part Number Nomenclature ..........................................................................2

Lumen Maintenance .................................................................................2

Environmental Compliance ...........................................................................2

Performance Characteristics ......................................................................3

Product Selection Guide..............................................................................3

Optical Characteristics ...............................................................................3

Electrical and Thermal Characteristics..................................................................4

Absolute Maximum Ratings .......................................................................4

Characteristic Curves .............................................................................5

Spectral Power Distribution Characteristics .............................................................5

Light Output Characteristics ..........................................................................6

Forward Current Characteristics......................................................................11

Radiation Pattern Characteristics .....................................................................13

Product Bin and Labeling Denitions ..............................................................15

Decoding Product Bin Labeling.......................................................................15

Luminous Flux Bins .................................................................................16

Radiometric Power Bins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Color Bin Denition .................................................................................17

Dominant Wavelength Bins ..........................................................................18

Peak Wavelength Bins...............................................................................18

Forward Voltage Bins ...............................................................................19

Mechanical Dimensions..........................................................................20

Reow Soldering Guidelines ......................................................................21

JEDEC Moisture Sensitivity ...........................................................................21

Solder Pad Design ..................................................................................22

Packaging Information...........................................................................22

Pocket Tape Dimensions ............................................................................22

Reel Dimensions ...................................................................................23

General Product Information

Product Test Conditions

LUXEON C LEDs are tested and binned with a DC drive current of 350mA at a junction temperature, Tj, of 85ºC.

Part Number Nomenclature

Part numbers for LUXEON C Colors follow the convention below:

L 1 C 1 – A A A 1 0 0 0 0 0 0 0 0 0

Where:

A A A – designates color (RED=Red, RNG=Red-Orange, PCA=PC Amber, GRN=Green, CYN=Cyan,

BLU=Blue, RYL=Royal Blue)

Therefore, the following part number is used for a LUXEON C Red:

L 1 C 1 – R E D 1 0 0 0 0 0 0 0 0 0

Part numbers for LUXEON C White follow the convention below:

L 1 C 1 – A A B B 0 0 0 0 0 0 0 0 0

Where:

A A – designates nominal CCT (40=4000K, 57=5700K)

B B – designates minimum CRI (70=70CRI)

Therefore, the following part number is used for LUXEON C White at 4000K 70CRI:

L 1 C 1 – 4 0 7 0 0 0 0 0 0 0 0 0 0

Lumen Maintenance

Please contact your local Sales Representative or Lumileds Technical Solutions Manager for more information about the long-

term performance of this product.

Environmental Compliance

Lumileds LLC is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON C is

compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the

RoHS Directive 2011/65/EU and REACH Regulation (EC) 1907/2006. Lumileds LLC will not intentionally add the following restricted

materials to its products: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated

diphenyl ethers (PBDE).

Performance Characteristics

Product Selection Guide

Table 1a. Product performance of LUXEON C Colors at 350mA, Tj=85ºC.

COLOR

DOMINANT OR

PEAK WAVELENGTH [1] (nm)

LUMINOUS FLUX (lm) OR

RADIOMETRIC POWER (mW) [2] PART

NUMBER

MINIMUM MAXIMUM MINIMUM TYPICAL

Red 624 634 35 39 L1C1-RED1000000000

Red-Orange 614 624 45 52 L1C1-RNG1000000000

PC Amber – – 80 94 L1C1-PCA1000000000

Green 520 540 90 97 L1C1-GRN1000000000

Cyan 490 510 65 72 L1C1-CYN1000000000

Blue 465 485 25 37 L1C1-BLU1000000000

Royal Blue 440 460 480 532 L1C1-RYL1000000000

Notes for Table 1a:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements. PC Amber is binned by chromaticity coordinates. Royal Blue is binned by peak wavelength. All other colors are

binned by dominant wavelength.

2. Royal Blue is binned my radiometric power. All other colors are binned by luminous ux.

Table 1b. Product performance of LUXEON C White at 350mA, Tj=85°C.

NOMINAL

CCT

MINIMUM

CRI

LUMINOUS FLUX (lm)TYPICAL

LUMINOUS EFFICACY

(lm/W)

PART

NUMBER

MINIMUM TYPICAL

4000K 70 100 116 121 L1C1-4070000000000

5700K 70 100 118 124 L1C1-5770000000000

Notes for Table 1b:

1. Lumileds maintains a tolerance of ±2 on CRI and ±6.5% on luminous ux measurements.

Optical Characteristics

Table 2a. Optical characteristics for LUXEON C Colors at 350mA, Tj=85°C.

PART

NUMBER

TYPICAL SPECTRAL

HALF-WIDTH [1]

(nm)

TYPICAL TOTAL

INCLUDED

ANGLE [2]

TYPICAL TEMPERATURE

COEFFICIENT OF DOMINANT

OR PEAK WAVELENGTH

(nm/°C)

TYPICAL

VIEWING

ANGLE [3]

L1C1-RED1000000000 20 146° 0.06 150°

L1C1-RNG1000000000 20 146° 0.06 150°

L1C1-PCA1000000000 80 146° -0.01 150°

L1C1-GRN1000000000 30 146° 0.04 150°

L1C1-CYN1000000000 30 146° 0.03 150°

L1C1-BLU1000000000 20 146° 0.03 150°

L1C1-RYL1000000000 20 146° 0.03 150°

Notes for Table 2a:

1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.

2. Total angle at which 90% of total luminous ux is captured.

3. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Table 2b. Optical characteristics for LUXEON C White at 350mA, Tj=85°C.

PART NUMBER TYPICAL TOTAL INCLUDED ANGLE [2] TYPICAL VIEWING ANGLE [3]

L1C1-xx70000000000 146° 150°

Notes for Table 2b:

1. Spectral half-width is the spectral bandwidth at 50% of the peak intensity.

2. Total angle at which 90% of total luminous ux is captured.

3. Viewing angle is the o axis angle from the LED centerline where the luminous intensity is ½ of the peak value.

Electrical and Thermal Characteristics

Table 3. Electrical and thermal characteristics for LUXEON C Colors at 350mA, Tj=85ºC.

PART NUMBER

FORWARD VOLTAGE (V) [1] TYPICAL TEMPERATURE

COEFFICIENT OF FORWARD

VOLTAGE (mV/°C) [2]

TYPICAL THERMAL

RESISTANCE — JUNCTION

TO SOLDER PAD (°C/W)

MINIMUM TYPICAL MAXIMUM

L1C1-RED1000000000 1.75 2.00 2.50 -1.6 2.8

L1C1-RNG1000000000 1.75 2.05 2.50 -1.6 2.8

L1C1-PCA1000000000 2.50 2.75 3.50 -1.7 3.0

L1C1-GRN1000000000 2.50 2.55 3.50 -2.4 3.5

L1C1-CYN1000000000 2.50 2.60 3.50 -2.4 3.5

L1C1-BLU1000000000 2.50 2.90 3.50 -2.6 3.5

L1C1-RYL1000000000 2.50 2.75 3.50 -1.7 2.8

L1C1-xxx0000000000 2.50 2.75 3.50 -1.7 2.8

Notes for Table 3:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.

2. Measured between 25°C and 85°C.

Absolute Maximum Ratings

Table 4. Absolute maximum ratings for LUXEON C Color Line.

PARAMETER GREEN, CYAN, BLUE

AND ROYAL BLUE

RED, RED-ORANGE

AND PC AMBER WHITE

DC Forward Current [1,2] 1050mA 1050mA 1225mA

Peak Pulsed Forward Current [1,3] 1050mA 1050mA 1225mA

LED Junction Temperature [1] (DC & Pulse) 135°C 120°C 135°C

ESD Sensitivity (ANSI/ESDA/JEDEC JS-001-2012) Class 3A Class 3A Class 3A

LED Storage Temperature -40°C to 135°C

Soldering Temperature JEDEC 020c 260°C

Allowable Reow Cycles 3

Reverse Voltage (Vreverse)LUXEON C LEDs are not designed to be driven in reverse bias

Notes for Table 4:

1. Proper current derating must be observed to maintain the junction temperature below the maximum allowable junction temperature.

2. Residual periodic variations due to power conversion from alternating current (AC) to direct current (DC), also called “ripple,” are acceptable if the following conditions are met:

– The frequency of the ripple current is 100Hz or higher

– The average current for each cycle does not exceed the maximum allowable DC forward current

– The maximum amplitude of the ripple does not exceed the maximum peak pulsed forward current

3. At 10% duty cycle with pulse width of 10ms.

Characteristic Curves

Spectral Power Distribution Characteristics

Figure 1: Typical normalized power vs. wavelength for LUXEON C Colors at 350mA, Tj=85ºC.

Figure 2: Typical normalized power vs. wavelength for LUXEON C White at 350mA, Tj=85ºC.

Light Output Characteristics

Figure 3a: Typical normalized light output vs. junction temperature for LUXEON C Red and Red-Orange at 350mA.

Figure 3b: Typical normalized light output vs. junction temperature for LUXEON C PC Amber at 350mA.

Figure 3c: Typical normalized light output vs. junction temperature for LUXEON C Cyan, Green and Blue at 350mA.

Figure 3d: Typical normalized light output vs. junction temperature for LUXEON C Royal Blue at 350mA.

Figure 3e: Typical normalized light output vs. junction temperature for LUXEON C White at 350mA.

Figure 4a: Typical normalized light output vs. forward current for LUXEON C Red and Red-Orange at Tj=85°C.

Figure 4b: Typical normalized light output vs. forward current for LUXEON C PC Amber at Tj=85°C.

Figure 4c: Typical normalized light output vs. forward current for LUXEON C Cyan, Green and Blue at Tj=85°C.

Figure 4d: Typical normalized light output vs. forward current for LUXEON C Royal Blue at Tj=85°C.

Figure 4e: Typical normalized light output vs. forward current for LUXEON C White at Tj=85°C.

Forward Current Characteristics

Figure 5a: Typical forward current vs. forward voltage for LUXEON C Red and Red-Orange at Tj=85ºC.

Figure 5b: Typical forward current vs. forward voltage for LUXEON C PC Amber at Tj=85ºC.

Figure 5c: Typical forward current vs. forward voltage for LUXEON C Cyan, Green and Blue at Tj=85ºC.

Figure 5d: Typical forward current vs. forward voltage for LUXEON C Royal Blue at Tj=85ºC.

Figure 5e: Typical forward current vs. forward voltage for LUXEON C White at Tj=85ºC.

Radiation Pattern Characteristics

Figure 6a: Typical radiation pattern for LUXEON C Red, Red-Orange, PC Amber, Cyan, Green and Blue at 350mA, Tj=85ºC.

Figure 7a: Typical polar radiation pattern for LUXEON C Red, Red-Orange, PC Amber, Cyan, Green and Blue at 350mA, Tj=85ºC.

Figure 6b: Typical radiation pattern for LUXEON C Royal Blue and White at 350mA, Tj=85ºC.

Product Bin and Labeling Denitions

Decoding Product Bin Labeling

In the manufacturing of semiconductor products, there are variations in performance around the average values given in the

technical datasheet. For this reason, Lumileds bins LED components for luminous ux, radiometric power, color point, peak

wavelength, dominant wavelength and forward voltage.

LUXEON C Colors LEDs are labeled using a 4-digit alphanumeric CAT code following the format below:

A B C D

Where:

A – designates luminous ux or radiometric power bin (example: A=20 to 25 lumens, B= 25 to 30 lumens,

H=480 to 520mW, J=520 to 560mW)

B C – designates color, peak or dominant wavelength bin (example: Red 40=624 to 634nm, Cyan 20=496 to 500nm,

Royal Blue 50=450 to 455nm)

D – designates forward voltage bin (example: A=1.7 to 1.9V, B=1.9 to 2.1V)

Therefore, a LUXEON C Red LED with a lumen range of 20 to 25, a dominant wavelength of 624 to 634nm and a forward voltage

range of 1.7 to 1.9V has the following CAT code:

A 4 0 A

Figure 7b: Typical polar radiation pattern for LUXEON C Royal Blue and White at 350mA, Tj=85ºC.

Luminous Flux Bins

Table 5 lists the standard photometric luminous ux bins for LUXEON C Color Line emitters. Although several bins are outlined,

product availability in a particular bin varies by production run and by product performance. Not all bins are available in all CCTs.

Table 5. Luminous ux bin denitions for LUXEON C Color Line.

BIN LUMINOUS FLUX (lm)

MINIMUM MAXIMUM

A 20 25

B 25 30

C 30 35

D 35 40

E 40 45

F 45 50

G 50 55

H 55 60

J 60 65

K 65 70

L 70 75

M 75 80

N 80 90

P 90 100

Q 100 110

R 110 120

S 120 130

T 130 140

U 140 150

V 150 170

W 170 190

Notes for Table 5:

1. Lumileds maintains a tolerance of ±6.5% on luminous ux measurements.

Radiometric Power Bins

Table 6. Radiometric power bin denitions for LUXEON C Royal Blue.

PART NUMBER BIN RADIOMETRIC POWER (mW)

MINIMUM MAXIMUM

L1C1-RYL1000000000

H 480 520

J 520 560

K 560 600

L 600 640

Notes for Table 6:

1. Lumileds maintains a tolerance of ±6.5% on radiometric power measurements.

Color Bin Denition

Table 7. 3- and 5-step MacAdam ellipse color bin denitions for LUXEON C White at 350mA, Tj = 85°C.

NOMINAL CCT COLOR SPACE CENTER POINT

(cx, cy)

MAJOR AXIS,

MINOR AXIS,

ELLIPSE ROTATION

ANGLE, θ

4000K Single 5-step MacAdam ellipse (0.3818, 0.3797) 0.01565 0.00670 53.7°

5700K Single 5-step MacAdam ellipse (0.3287, 0.3417) 0.01243 0.00533 59.1°

Notes for Table 7:

1. Lumileds maintains a tolerance of ±0.005 on x and y coordinates in the CIE 1931 color space.

Figure 8: 3- and 5-step MacAdam ellipse illustration for Table 7.

Dominant Wavelength Bins

Table 8a. Dominant wavelength bins for LUXEON C Color Line at 350mA, Tj=85ºC.

PART NUMBER BIN DOMINANT WAVELENGTH (nm) [1]

MINIMUM MAXIMUM

L1C1-RED1000000000 40 624 634

L1C1-RNG1000000000 20 614 624

L1C1-GRN1000000000

10 520 525

20 525 530

30 530 535

40 535 540

L1C1-CYN1000000000

10 490 496

20 496 500

30 500 505

40 505 510

L1C1-BLU1000000000

10 460 465

20 465 470

30 470 475

40 475 480

50 480 485

Notes for Table 8a:

1. Lumileds maintains a tolerance of ±0.5nm on dominant wavelength measurements.

Peak Wavelength Bins

Table 8b. Peak wavelength bins for LUXEON C Royal Blue.

PART NUMBER BIN PEAK WAVELENGTH (nm) [1]

MINIMUM MAXIMUM

L1C1-RYL1000000000

30 440 445

40 445 450

50 450 455

60 455 460

Notes for Table 8b:

1. Lumileds maintains a tolerance of ±0.5nm on peak wavelength measurements.

Table 8b. Peak wavelength bins for LUXEON C PC Amber.

PART NUMBER BIN x y

L1C1-PCA1000000000 20

0.5622 0.4372

0.5576 0.4326

0.5775 0.4132

0.5843 0.4151

Notes for Table 8b:

1. Lumileds maintains a tolerance of ±0.005 on x and y color coordinates measurements.

Forward Voltage Bins

Table 9. Forward voltage bin denitions for LUXEON C Color Line.

BIN FORWARD VOLTAGE (V) [1]

MINIMUM MAXIMUM

A 1.70 1.90

B 1.90 2.10

C 2.10 2.30

D 2.30 2.50

E 2.50 2.70

F 2.70 2.90

G 2.90 3.10

H 3.10 3.30

Notes for Table 9:

1. Lumileds maintains a tolerance of ±0.06V on forward voltage measurements.



0.41

0.42

0.43

0.44

0.55 0.56 0.57 0.58 0.59

CIE 1931 y

CIE 1931 x

PCAmber

Figure 9: Color bin structure for LUXEON C PC Amber for Table 8c.

Mechanical Dimensions

Notes for Figure 10:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 10: Mechanical dimensions for LUXEON C Color Line.

NOTE: For internal used dimension please refer to the layer

"Spec_InternalUsedOnly" inside the electronic copy of this file.

Reow Soldering Guidelines

Table 10. Reow prole characteristics for LUXEON C Color Line.

PROFILE FEATURE LEAD-FREE ASSEMBLY

Preheat Minimum Temperature (Tsmin)150°C

Preheat Maximum Temperature (Tsmax)200°C

Preheat Time (tsmin to tsmax)60 to 120 seconds

Ramp-Up Rate (Tsmax to Tp) 3°C / second maximum

Liquidus Temperature (TL)217°C

Time Maintained Above Temperature TL (tL)10 to 30 seconds

Peak / Classication Temperature (Tp)260°C

Time Within 5°C of Actual Temperature (tp)30 seconds

Ramp-Down Rate 6°C / second maximum

Time 25°C to Peak Temperature 8 minutes maximum

JEDEC Moisture Sensitivity

Table 11. Moisture sensitivity levels for LUXEON C LEDs.

LEVEL FLOOR LIFE SOAK REQUIREMENTS STANDARD

TIME CONDITIONS TIME CONDITIONS

1 Unlimited ≤30°C / 85% RH 168 Hours +5 / -0 85°C / 85% RH

Time 25ºC to Peak

JEDEC J-STD-020D

Critical Zone

TL to Tp

Ramp-up

Ramp-down

Temperature

Time

Preheat Area

Tsmax

Tsmin

Figure 11: Visualization of the acceptable reow temperature prole as specied in Table 10.

Solder Pad Design

Notes for Figure 12:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

3. The drawing above shows the recommended solder pad layout on Printed Circuit Board (PCB).

Figure 12: Recommended PCB solder pad layout for LUXEON C Color Line.

Packaging Information

Pocket Tape Dimensions

Notes for Figure 13:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Cross secon view A-A and B-B in

this drawing are not drawn to scale

in order to depict the details clearly

Figure 13: Pocket Tape dimensions for LUXEON C Color Line.

Reel Dimensions

Notes for Figure 14:

1. Drawings are not to scale.

2. All dimensions are in millimeters.

Figure 14: Reel dimensions for LUXEON C Color Line.

DS144P LUXEON C Color Line

Product Datasheet 20150902

LUXEON is a registered trademark of the Lumileds Holding B.V.

in the United States and other countries.

lumileds.com

Neither Lumileds Holding B.V. nor its aliates shall be liable for any kind of loss of data or

any other damages, direct, indirect or consequential, resulting from the use of the provided

information and data. Although Lumileds Holding B.V. and/or its aliates have attempted to

provide the most accurate information and data, the materials and services information and data

are provided “as is,” and neither Lumileds Holding B.V. nor its aliates warrants or guarantees

the contents and correctness of the provided information and data. Lumileds Holding B.V. and its

aliates reserve the right to make changes without notice. You as user agree to this disclaimer

and user agreement with the download or use of the provided materials, information and data.

About Lumileds

Lumileds is the light engine leader, delivering innovation, quality and reliability.

For 100 years, Lumileds commitment to innovation has helped customers pioneer breakthrough products in the automotive,

consumer and illumination markets.

Lumileds is shaping the future of light with our LEDs and automotive lamps, and helping our customers illuminate how people

see the world around them.

To learn more about our portfolio of light engines, visit lumileds.com.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Lumileds:

L1C1-5770000000000 L1C1-PCA1000000000 L1C1-BLU1000000000 L1C1-RNG1000000000