High Density Signal and Power Connectors
DRAGONFLY
Interconnection Systems
Positronic Industries
www.connectpositronic.com
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
High Density Signal and Power
Interconnection Systems
Dragonfly
High Density Signal/ Power Interconnection Systems
Unless otherwise specied, dimensional tolerances are:
1) Male contact mating diameters : ±0.03 [0.001]
2) Contact termination diameters : ±0.08 [0.003]
3) All other diameters : ±0.13 [0.005]
4) All other dimensions : ±0.38 [0.015]
Dimensions are in millimeters [inches]. All dimensions are subject to change.
CATALOG NUMBER: A-002 rev. B
Products described within this catalog may be protected by one or more of
the following U.S. patents:
#4,721,472 #4,900,261 #5,255,580 #5,329,697 #6,260,268
Patented in Canada, 1992 Other Patents pending.
Unless otherwise stated, Positronic code and part number are marked on each connector. The contents
of the code are subjected to the discretion of Positronic and it is for internal use only. Marking may be
done on either side or both sides of the connector.
Positronic believes the data contained herein to be reliable. Since the technical information is given free
of charge, the user employs such information at his own discretion and risk. Positronic assumes no
responsibility for results obtained or damages incurred from use of such information in whole or in part.
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
12
High Density Signal and Power
Interconnection Systems
Typical Connection Systems
System 1
Straight Board Mounting to Cable
System 2
Straight Board Mounting to
Right Angle Board Mounting
DF16F4BN
DF04F3N
DF04M00 with crimp
contacts installed.
DF16M00 with crimp
contacts installed.
DF07M30
DF07F4BN
1
System 3
Right Angle Board Mounting to Cable
System 4
Cable to Cable
DF07M00 with crimp
contacts installed.
DF07F00 with crimp
contacts installed.
System 5
Cable Connector and Hood
with Cable Clamp DF07F0W1
Hood Top
Hood Insert
Wire Clamp
Hood Bottom
2x Cable Clamp Screws
2x Hood Screws
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com 2
Connector Versions
Connector Versions and
Technical Characteristics
Version 04
Mixed Density
Contact Connector
Two (2) Size 16 Power
Contacts and Two (2)
Size 22 Signal Contacts
Specify Code 04 in Step 2
Version 03
Power Contact
Connector
Three (3) Size 16
Power Contacts
Coming
Soon!
Version 07
Power Contact
Connector
Seven (7) Size 16
Power Contacts
Specify Code 07 in Step 2
Version 10
Signal/ Power Contact
Connector
Ten (10) Size 20 Signal/
Power Contacts
Specify Code 10 in Step 2
Version 16
High Density Signal
Contact Connector
Sixteen (16) Size 22
Signal Contacts
Specify Code 16 in Step 2
Materials and Finishes:
Insulator: Glass-lled nylon, UL 94V-0, green for versions
07, 10 and 16. Black color for version 04.
Hood (W1): Polypropylene, UL 94V-0. Black color.
Hood (W2): Glass-lled nylon, UL 94V-0. Black color.
Contacts: Precision machined copper alloy with gold
over nickel plate.
Push-on fasteners: Copper alloy with tin plate.
Screws: Steel with zinc plate and chromate seal.
Electrical Characteristics:
Contact Current Rating:
Size 16 Contacts: 20.0 amperes, continuous.
Size 20 Contacts: 7.5 amperes, nominal.
12.0 amperes, continuous with AWG 18 wires.
Size 22 Contacts: 3.0 amperes, nominal.
Initial Contact Resistance
Max (per IEC 512-2, Test 2b) :
Size 16 Contacts: 0.003 ohms
Size 20 Contacts: 0.005 ohms.
Size 22 Contacts: 0.005 ohms.
Insulator Resistance:
5 G ohms (per IEC 512-2, Test 3a).
Voltage Proof:
Size 16 Contacts: 1500 V r.m.s.
Size 20 Contacts: 1000 V r.m.s.
Size 22 Contacts: 1000 V r.m.s.
Working Voltage:
Size 16 Contacts: 500 V r.m.s.
Size 20 Contacts: 333 V r.m.s.
Size 22 Contacts: 333 V r.m.s.
Climatic Characteristic:
Working temperature: -55°C to +105°C.
Mechanical Characteristics:
Connection Systems: Connector provides cable to cable,
cable to printed board and printed board
to printed board mating systems.
Locking Systems: Insulators provide locking between cable to
cable and cable to printed board applications.
Polarization: Provided in insulator design.
Removable Contacts: Install contact from rear of insulator, release
with extraction tool from front of insulator.
Female contacts feature “closed entry” 1,000
cycle design. (Size 16 contact tested to
10,000 cycles. See page 3.) “Open entry”
500 cycle design also available.
Fixed Contacts: Size 16 female contact features
“closed entry” 1,000 cycles design for both
straight and right angle (90°) PCB mount.
Size 22 female contact features “open entry”
design. “Closed entry” available on request.
Size 20 female contact features both
“closed entry” and “open entry” design options.
See ordering informations.
Removable Contact Retention in Insulator
Size 16 Contacts: 45 N [10 lbs.] Min.
Size 20 Contacts: 27 N [ 6 lbs.] Min.
Size 22 Contacts: 27 N [ 6 lbs.] Min.
Fixed Contact Retention in Insulator
Size 16 Contacts: 45 N [10 lbs.] Min.
Size 20 Contacts: 27 N [ 6 lbs.] Min.
Size 22 Contacts: 27 N [ 6 lbs.] Min.
Sequential Mating: Consult factory for details.
Recognized: UL File E49351.
Technical Characteristics
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
10 3
Above curves developed separately using (a) DF04 connectors and AWG 12 wires,
and (b) DF07 connectors and AWG 12 wires and (c) DF10 connectors and AWG 18 wires. All power contacts under load.
Temperature Rise Curve
and Contact Performance
Temperature Rise Curve
Tested per IEC 512-3, Test 5a
10,000 Cycles Contact Performance
Contact resistance tested per IEC 512-2, Test 2b
Above curves developed using DF07 connectors fully populated with size 16 contacts.
This information is supplied for reference. Contact wear and change in contact resistance
may vary from one application to another. Contact technical sales to discuss details.
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
DF04 Outline Dimensions
Male
Contact Termination Dimensions
See Step 4 of Ordering Information
Power contacts Signal contacts
Straight PCB Mount
Specify Code 3 in Step 4
Right Angle (90°) PCB Mount
Specify Code 4 in Step 4
Not supplied with alignment bar
Dragonfly Version 04
Straight and Right Angle (90°)
PCB Mount Connectors
Female
Male Female
Male Female
Power contacts Signal contacts
Power contacts Signal contacts Power contacts Signal contacts
4
PCB Mount Connector
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
DF04 Outline Dimensions
Male only
Contact Termination Dimensions
See Step 4 of Ordering Information
Removable Contact Cable Connectors
Specify Code 0 in Step 4 of Ordering Information
Outline Dimensions
Removable contacts should be allowed to float after terminated and installed in connector body.
This enables superior mating performance. Consult factory if alignment insert for male contacts is desired.
Dragonfly Version 04
Right Angle (90°) PCB Mount
(Longer Insulator Version) and
Removable Contact Cable Connectors
Power contacts Signal contacts
Male Female
Version 04
5
8
PCB Mount Connector (Longer Insulator)
Right Angle (90°) PCB Mount
Specify Code 42 in Step 4
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
PCB Mount Connector
DF07 Outline Dimensions
Contact Termination Dimensions
See Step 4 of Ordering Information
Removable Contact Cable Connectors
Specify Code 0 in Step 4 of Ordering Information
Outline Dimensions
Right Angle (90°) PCB Mount
Specify Code 4 in Step 4
Integrated alignment bar and angle bracket, shown for reference only. (Specify code B in Step 5)
6
Dragonfly Version 07
PCB Mount Connectors and
Removable Contact Cable Connectors
Male Female
Male Female
Male Female
Male Female
Removable contacts should be allowed to float after terminated and installed in connector body.
This enables superior mating performance. Consult factory if alignment insert for male contacts is desired.
Version 07
Straight PCB Mount
Specify Code 3 in Step 4
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
PCB Mount Connector
DF10 and DF16 Outline Dimensions
Version 10 PCB Mount Contact Termination Dimensions
7
Dragonfly Versions 10 and 16
PCB Mount Connectors and
Contact Termination Dimensions
Male Female
Male Female
Straight PCB Mount
Specify Code 3 in Step 4
Right Angle (90°) PCB Mount
Specify Code 4 in Step 4
Removable Contact Cable Connectors
Specify Code 0 in Step 4 of Ordering Information
Removable contacts should be allowed to float after terminated and installed in connector body.
This enables superior mating performance. Consult factory if alignment insert for male contacts is desired.
Integrated alignment bar and angle bracket shown for reference only. (Specify code B in Step 5)
6
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com 8
Contact Termination Dimensions and
Contact Hole Patterns for PCB Mount
Version 16 PCB Mount Contact Termination Dimensions
Straight PCB Mount
Specify Code 3 in Step 4
Right Angle (90°) PCB Mount
Specify Code 4 in Step 4
Integrated alignment bar and angle bracket shown for reference only.
(Specify code B in Step 5)
Female
Male
Male
Female
Version 04 PCB Mount - Contact Hole Patterns
Contact Hole Pattern for
Straight PCB Mount
Version 07 PCB Mount - Contact Hole Patterns
Contact Hole Pattern for
Right Angle (90°) PCB Mount
For both male and female connectors.
For both male and female connectors.
Contact Hole Pattern for
Straight PCB Mount
Contact Hole Pattern for
Right Angle (90°) PCB Mount
Suggested Ø2.00±0.08 [0.079±0.003] holes for mounting connector with push-on fasteners.
Suggested Ø2.54 [0.100] holes for mounting connector with screws.
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
Version 10 PCB Mount - Contact Hole Patterns
49
Contact Hole Patterns for PCB Mount
Contact Hole Patterns for Straight PCB Mount
For both male and female connectors.
Contact Hole Patterns for Version 16 PCB Mount
Contact Hole Pattern for Straight PCB Mount
Contact Hole Pattern for Right Angle (90°) PCB Mount
Contact Hole Pattern for Right Angle (90°) PCB Mount
For both male and female connectors.
Suggested Ø2.00±0.08 [0.079±0.003] holes for mounting connector with push-on fasteners.
Suggested Ø2.54 [0.100] holes for mounting connector with screws.
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
Flange supplied factory installed to connector
Panel Mount Option,
Mounting Hardware and Installation Tools
Panel Mount Option
For Male Crimp Connectors of Versions 07, 10 and 16 only
(Specify Code P in Step 5)
10
Flange Dimensions Panel Cutout
Suggested Installation to Panel:
Suggested installation of connector to panel with
screws and nuts.
(Screws and nuts shown for reference only)
Push-on Fasteners
Available on all connectors except Version 04 code 42 contacts
Straight PCB mount version
Specify code N in Step 5
Right Angle (90°) PCB mount version
Specify code BN in Step 5
Material: Copper alloy with tin plate.
Mounting Screws Ordering Information Compliant Press-Fit Terminations
PCB Straight Mount
Connector Installation Tools
Ordering Information
Connector
Variant
Screw Part
Number
Screw
Length “A”
Recommended PCB
Thickness
DF04*3/93* 4546-7-1-16 6.35 [0.250] 2.20 [0.087] to 3.50 [0.138]
4546-7-2-16 7.93 [0.312] 3.60 [0.142] to 4.50 [0.177]
DF04*4/42* 4546-32-1-16 8.00 [0.315] 1.40 [0.055] to 4.00 [0.157]
4546-32-2-16 10.00 [0.393] 3.00 [0.118] to 6.00 [0.236]
DF07*3/93*
DF10*3/98*
DF16*3/98*
4546-7-1-16 6.35 [0.250] 1.40 [0.055] to 3.00 [0.118]
4546-7-2-16 7.93 [0.312] 3.00 [0.118] to 4.00 [0.157]
DF07/10/16*4* 4546-7-0-16 4.78 [0.188] 2.00 [0.079] maximum
Catalog
Part Number
Seating Tool
Part Number
Support Tool
Part Number
DF04F930 9513-309-21 9513-404-4
DF04M930 9513-309-22
DF07F930 9513-309-25 9513-404-5
DF07M930 9513-309-24
DF10F980 9513-309-26 9513-404-6
DF10M980 9513-309-27
DF16F980 9513-309-20 9513-404-3
DF16M980 9513-309-23
Materials and Finishes:
Flange: Glass-filled nylon, UL 94V-0.
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
2
Connector Hood
11
Hood - Top and Side Opening
For Versions 07, 10 and 16 only
Specify code W1 in Step 5
Hood - Top Opening - Wide Body
For Versions 07, 10 and 16 only (for partially and fully populated connector)
Specify code W2 in Step 5
Outline Dimensions
Outline Dimensions
Materials and Finishes:
Hood Top and Bottom, Insert: Polypropylene,
UL 94V-0, black.
Cable Clamp: Steel with nickel plate.
Hood and Cable Clamp Screws: Steel with black
oxide or Steel with zinc plate and chromate seal.
Materials and Finishes:
Hood: Glass-filled nylon, UL 94V-0, black.
Cable Clamp: Steel with nickel plate.
Hood and Cable Clamp Screws: Steel with black
oxide or Steel with zinc plate and chromate seal.
Hood comes supplied with extra
insert for unused opening.
Note: “W1” Hood may not
accommodate fully populated
connector using thick insulation
12, 14 and 16 AWG wires.
Customer review recommended
Note: “W2” Hood are able to
accommodate fully populated
connector using thick insulation
12, 14 and 16 AWG wires.
Top opening:
16.50 [0.650]
x 9.00 [0.354]
(for reference only)
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
Size 22 contact
Rated 3.0 amperes (“Closed entry” 1,000 cycles minimum)
Size 20 contact
Rated up to 12.0 amperes (“Closed entry” 1,000 cycles minimum)
Size 16 contact
Rated 20.0 amperes (“Closed entry” 1,000 cycles minimum)
MC422N FC422N2
(Closed entry)
FC422N7
(Open entry, 500 cycles)
Removable Crimp Contacts
Male Contact Female Contact (Closed entry)
Male Contact Female Contact Wire Size AWG [mm2] ØA ØB
MC112N FC112N2 12 [4.0] 2.49 [0.098] N/A
MC114N FC114N2 14-16 [2.5-1.5] 2.06 [0.081] 2.67 [0.105]
MC116N FC116N2 16-18 [1.5-1.0] 1.70 [0.067] 2.36 [0.093]
MC120N FC120N2 20-22-24 [0.5-0.3-0.25] 1.14 [0.045] 1.73 [0.068]
Note: Size 16 contacts tested
to 10,000 cycles performance
as shown in graph on page 3.
This does not insure similar
performance under different
conditions. Wear in mating
area of contacts does occur.
Customer review recommended.
12
Male Contact
MC718N / MC720N
Female Contact
FC718N2 / FC720N2
(Closed entry)
Female Contact
FC718N7 / FC720N7
(Open entry, 500 cycles)
Contact Part
Number
Wire Size
AWG [mm2]ØA ØB C
MC718N
18 [1.0]
1.40 [0.055]
N/A
18.80 [0.740]
FC718N2 1.40 [0.055] 18.24 [0.718]
FC718N7 1.37 [0.054] 18.80 [0.740]
*MC720N
20-22-24 [0.5-0.3-0.25] 1.14 [0.045] 1.73 [0.068]
18.80 [0.740]
*FC720N2 19.41 [0.764]
*FC720N7 18.80 [0.740]
Male
Contact
Female
Contact
Wire Size
AWG [mm2]ØA ØB
MC422N FC422N2 22 [0.3] 0.89 [0.035] 1.42 [0.056]
FC422N7
Please use correct wire size and it should be smaller than ØA of the contact.
Consult factory for other contact sizes, materials and termination styles.
* Contact rated 7.5 amperes
SUGGESTED PRINTED BOARD HOLE SIZES COMPLIANT PRESS-FIT CONNECTORS
Traditionally, tin-lead has been a popular plating for PBC holes. However, many PCB hole platings must now be
RoHS Compliant. Positronic is pleased to offer PCB HOLE SIZE FOR RoHS PCB plating as shown below.
OMEGA COMPLIANT PRESS-FIT CONTACT HOLE
BOARD
TYPE
CONTACT
SIZE
DRILL
HOLE SIZE RECOMMENDED PLATING FINISHED
HOLE SIZES
TIN-LEAD
SOLDER PCB
20
22
ø1.150±0.025
[ø0.0453±0.0010]
15µ [0.0006] minimum solder
over 25µ [0.0010] min. copper
ø1.000+0.090-0.060
[ø0.0394+0.0035-0.0024]
RoHS PCB PLATING OPTIONS
COPPER PCB 20
22
ø1.19±0.05
[ø0.047±0.002] 25µ [0.0010] min. copper ø1.09±0.05
[ø0.043±0.002]
IMMERSION
TIN PCB
20
22
ø1.19±0.05
[ø0.047±0.002]
0.85±0.15µ [0.000033±0.000006]
immersion tin over
25µ [0.0010]min. copper
ø1.09±0.05
[ø0.043±0.002]
IMMERSION
SILVER PCB
20
22
ø1.19±0.05
[ø0.047±0.002]
0.34±0.17µ [0.000013±0.000007]
immersion silver over
25µ [0.0010]min. copper
ø1.09±0.05
[ø0.043±0.002]
ELECTROLESS
NICKEL/
IMMERSION
GOLD PCB
20
22
ø1.19±0.05
[ø0.047±0.002]
0.05µ [0.000002] min.
immersion gold over
4.5±1.5µ [0.000177±0.000059]
electroless nickel per IPC-4552
over 25µ [0.0010] min. copper
ø1.09±0.05
[ø0.043±0.002]
Note: For PCB plating
compositions not shown,
consult Technical Sales.
PRESS-FIT
CONTACT HOLE
“Bi-Spring” Termination
“Omega” Termination
A-002 Rev. B1
BI-SPRING COMPLIANT PRESS-FIT CONTACT HOLE
BOARD
TYPE
CONTACT
SIZE
DRILL
HOLE SIZE RECOMMENDED PLATING FINISHED
HOLE SIZES
TIN-LEAD
SOLDER PCB 16 ø1.750±0.025
[ø0.0689±0.0010]
15µ [0.0006] minimum solder
over 25µ [0.0010] min. copper
ø1.600+0.090-0.060
[ø0.0630+0.0035-0.0024]
RoHS PCB PLATING OPTIONS
COPPER PCB 16 ø1.73±0.05
[ø0.068±0.002] 25µ [0.0010] min. copper ø1.600+0.090-0.060
[ø0.0630+0.0035-0.0024]
IMMERSION
TIN PCB 16 ø1.73±0.05
[ø0.068±0.002]
0.85±0.15µ [0.000033±0.000006]
immersion tin over
25µ [0.0010]min. copper
ø1.600+0.090-0.060
[ø0.0630+0.0035-0.0024]
IMMERSION
SILVER PCB 16 ø1.73±0.05
[ø0.068±0.002]
0.34±0.17µ [0.000013±0.000007]
immersion silver over
25µ [0.0010] min. copper
ø1.600+0.090-0.060
[ø0.0630+0.0035-0.0024]
ELECTROLESS
NICKEL/
IMMERSION
GOLD PCB
16 ø1.73±0.05
[ø0.068±0.002]
0.05µ [0.000002] min.
immersion gold over
[4.5±1.5µ [0.000177±0.000059]
electroless nickel per IPC-4552
over 25µ [0.0010]min. copper
ø1.600+0.090-0.060
[ø0.0630+0.0035-0.0024]
COMPLIANT PRESS-FIT CONNECTORS
FOR CONNECTOR VERSIONS 04, 07, 10 AND 16
www.connectpositronic.com
Note:
DF04 - uses size 16 bi-spring press-fit and size 22 omega press-fit contacts.
DF07 - uses size 16 bi-spring press-fit contacts.
DF10 - uses size 20 omega press-fit contacts.
DF16 - uses size 22 omega press-fit contacts.
Positronic Industries, Inc
www.connectpositronic.com
www.positronicasia.com
Recommended Tools for Crimp Contacts
Contact Extraction Tool Contact Insertion Tool Cycle-Controlled Step
Adjustable Hand Crimp Tool
Connector Ordering Information
Specify complete connector by following step 1 to 5
13
Example DF 07 M 3 N /AA - XXX
Step 1 2 3 4 5 6 7
STEP 1 : Basic Series
DF : Dragony Series
STEP 2 : Connector Versions
04 : Mixed density contact connector
two (2) size 16 power contacts and
two (2) size 22 signal contacts
07 : Power contact connector
seven (7) size 16 power contacts
10 : Signal/ power contact connector
ten (10) size 20 signal/ power contacts
16 : High density signal contact connector
sixteen (16) size 22 signal contacts
STEP 3 : Connector Gender
M : Male
F : Female
STEP 4: Type of Contact
0 : Removable contact. (contacts ordered separately).
*3 : Solder, straight PCB mount.
31 : Solder, open-entry, straight PCB mount.
(For female connectors of version 10 only.)
*4 : Solder, right angle (90°) PCB mount.
41 : Solder, open-entry, right angle PCB mount.
(For female connectors of version 10 only.)
42 : Solder, right angle (90°) PCB mount.
(For version 04 male only. Using Longer Insulator.)
93 : Press-t, compliant termination straight pcb mount.
(For versions 04 and 07 only.)
98 : Press-t, compliant termination straight pcb mount.
(For versions 10 and 16 only.)
*Standard female contact is closed-entry for Versions 07 and 10.
*Standard female contact is open-entry for Version 16.
STEP 7 : Special Options
Consult factory for customization of connectors.
Example: Selective loading, sequential mating, etc.
STEP 5 : Mounting Style, Hoods, Panel Mount
0 : No hardware.
For mounting connector with self-tapping screws.
(Order screws separately.)
N : Push-on fasteners.
B : Plastic 90° Mounting Bracket.
For versions 07, 10 and 16 only.
BN : Plastic 90° mounting bracket with push-on fasteners.
For versions 07, 10 and 16 only.
W1 : Top and side opening hood.
For versions 07, 10 and 16 only.
W2 : Top opening hood-wide body
For versions 07, 10 and 16 only.
P : Panel mount adaptor for male crimp connectors of
versions 07, 10 and 16 only.
Note: For suggested straight mount pcb holes sizes
of compliant press-t connectors, please consult factory.
STEP 6: Environmental Compliance Options
/AA : Compliant per EU Directive 2002/95/EC (RoHS)
Note: If compliance to environmental legislation is not
required, this step will not be used.
Example: DF16F30
Contact
Size
Contact
Extraction Tool
Contact
Insertion Tool Hand Crimp Tool Semi-Automatic
Crimp Machine
Size 16 9081-0 9099-0 9501-0 with 9502- 1 positioner 9550-0
Size 20 9081-2 9099-4 9507-0 with 9502-21 positioner (Male)
9507-0 with 9502-22 positioner (Female)
9550-1
Size 22 9081-3 9099-1
9507-0 with 9502-12 positioner (Male)
9507-0 with 9502-13 positioner (FC422N2)
9507-0 with 9502-23 positioner (FC422N7)
Consult factory for details on semi-automatic crimp machine. Above tools were shown for reference only.
DRAGONFLY
Positronic Industries
www.connectpositronic.com
NORTH AMERICAN SALES OFFICES
United States, Springeld, Missouri
Factory and Sales Ofce 417 866 2322 info@connectpositronic.com
Puerto Rico Sales Ofce 800 641 4054
Mexico Sales Ofce 800 872 7674
Canada Sales Ofce 800 327 8272
EUROPEAN SALES OFFICES
France, Auch Factory and Sales 335 6263 4491 contact@connectpositronic.com
Northern France Sales Ofce 331 4588 1388 jchalaux@connectpositronic.com
Southern France Sales Ofce 335 6263 4491 plafon@connectpositronic.com
Italy Sales Ofce 3902 5411 6106 rmagni@connectpositronic.com
Germany Sales Ofce 4923 5163 4739 cbouche@connectpositronic.com
United Kingdom Sales Ofce 44 1993 831 939 lbridwell@connectpositronic.com
Europe & Middle East Technical Agents:
Finland, United Kingdom, Scotland, Israel, Norway, Sweden, Turkey and the Ukraine.
ASIA / PACIFIC SALES OFFICES
Singapore Factory, Sales and Engineering Ofce
Singapore +65 6842 1419 singapore@connectpositronic.com
Japan +813 5812 7720 japan@connectpositronic.com
South Korea +82 31 909 8047 korea@connectpositronic.com
India +91 20 2439 4810 india@connectpositronic.com
Taiwan +886 2 2937 8775 taiwan@connectpositronic.com
China
Zhuhai (Factory) +86 756 362 6466 china@connectpositronic.com
Beijing & Xian +86 29 8839 5306 xian@connectpositronic.com
Shenzhen +86 755 2643 7578 shenzhen@connectpositronic.com
Shanghai +86 158 2907 9779 shanghai@connectpositronic.com
Malaysia +60 4 644 9688
New Zealand +64 3 358 5154 newzealand@connectpositronic.com
Australia +61 2 4362 3477 australia@connectpositronic.com
POSITRONIC INDUSTRIES, INC
423 N Campbell Avenue, P O Box 8247,
Springeld, MO 65801, USA
Telephone: 1 417 866 2322
Fax: 1 417 866 4115
Email: info@connectpositronic.com
POSITRONIC INDUSTRIES, SAS
Zone Industrielle Est, 46 Route d’Engachies,
F32020, Auch Cedex 9, France
Telephone: 335 62 63 44 91
Telecopieur: 335 62 63 51 17
Email: contact@connectpositronic.com
POSITRONIC ASIA PTE LTD
3014A Ubi Road 1 # 07-01 Singapore 408703
Telephone: 65 6842 1419 Fax: 65 6842 1421
Email: singapore@connectpositronic.com
www.connectpositronic.com
