0603 CHIP INDUCTORS High-Reliability Chip Inductors ML312RAA Typical L vs Frequency 400 270 nH 350 110 100 90 80 70 60 50 40 30 20 10 300 Inductance (nH) 120 0 -55 -40 250 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (C) 200 B overall 120 nH 150 68 nH 100 50 33 nH 0 12 nH 3.9 nH 10 1000 100 A H C F I G J F 10000 I E terminal Frequency (MHz) D Terminal wraparound: approx 0.007/0,18 both ends Typical Q vs Frequency B max C max 100 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 90 1,80 1,12 1,02 33 nH 70 68 nH 60 3.9 nH 270 nH 120 nH 30 20 10 0 10 100 1000 10000 Frequency (MHz) (R) 0,38 0,76 F 0,33 G 0,86 H 1,02 I 0,64 J 0,64 Core material Ceramic Terminations Silver-palladium-platinum-glass frit Ambient temperature -55C to +125C with Imax current, +125C to +155C with derated current Storage temperature Component: -55C to +155C. Packaging: -55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Enhanced crush-resistant packaging 2000 per 7 reel Paper tape: 8 mm wide, 1.0 mm thick, 4 mm pocket spacing Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 (c) Coilcraft, Inc. 2010 E 12 nH 50 40 D ref Suggested Land Pattern A max 80 Q factor 25C This robust version of Coilcraft's standard 0603CS series features high temperature materials that allow operation in ambient temperatures up to 155C. Current Derating Percent of rated Irms Small size, exceptional Q and high SRFs make these inductors ideal for high frequency applications where size is at a premium. They also have excellent DCR and current carrying characteristics. Document ML195-1 Revised 12/09/10 Phone 800-981-0363 Fax 847-639-1508 E-mail cps@coilcraft.com Web www.coilcraft-cps.com 0603 CHIP INDUCTORS ML312RAA Series (0603) Part number1 ML312RAA1N6JLZ ML312RAA1N8JLZ ML312RAA2N2JLZ ML312RAA3N3_LZ ML312RAA3N6_LZ ML312RAA3N9_LZ ML312RAA4N3_LZ ML312RAA4N7_LZ ML312RAA5N1_LZ ML312RAA5N6_LZ ML312RAA6N8_LZ ML312RAA7N5_LZ ML312RAA8N2_LZ ML312RAA8N7_LZ ML312RAA9N5_LZ ML312RAA10N_LZ ML312RAA11N_LZ ML312RAA12N_LZ ML312RAA15N_LZ ML312RAA16N_LZ ML312RAA18N_LZ ML312RAA22N_LZ ML312RAA23N_LZ ML312RAA24N_LZ ML312RAA27N_LZ ML312RAA30N_LZ ML312RAA33N_LZ ML312RAA36N_LZ ML312RAA39N_LZ ML312RAA43N_LZ ML312RAA47N_LZ ML312RAA51N_LZ ML312RAA56N_LZ ML312RAA68N_LZ ML312RAA72N_LZ ML312RAA82N_LZ ML312RAAR10_LZ ML312RAAR11_LZ ML312RAAR12_LZ ML312RAAR15_LZ ML312RAAR18_LZ ML312RAAR20_LZ ML312RAAR21_LZ ML312RAAR22_LZ ML312RAAR25_LZ ML312RAAR27_LZ ML312RAAR33_LZ ML312RAAR39_LZ Inductance2 (nH) 1.6 @ 250 MHz 1.8 @ 250 MHz 2.2 @ 250 MHz 3.3 @ 250 MHz 3.6 @ 250 MHz 3.9 @ 250 MHz 4.3 @ 250 MHz 4.7 @ 250 MHz 5.1 @ 250 MHz 5.6 @ 250 MHz 6.8 @ 250 MHz 7.5 @ 250 MHz 8.2 @ 250 MHz 8.7 @ 250 MHz 9.5 @ 250 MHz 10 @ 250 MHz 11 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz 16 @ 250 MHz 18 @ 250 MHz 22 @ 250 MHz 23 @ 250 MHz 24 @ 250 MHz 27 @ 250 MHz 30 @ 250 MHz 33 @ 250 MHz 36 @ 250 MHz 39 @ 250 MHz 43 @ 250 MHz 47 @ 200 MHz 51 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 72 @ 200 MHz 82 @ 150 MHz 100 @ 150 MHz 110 @ 150 MHz 120 @ 150 MHz 150 @ 150 MHz 180 @ 100 MHz 200 @ 100 MHz 210 @ 100 MHz 220 @ 100 MHz 250 @ 100 MHz 270 @ 100 MHz 330 @ 100 MHz 390 @ 100 MHz Percent tolerance Q min3 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 26 21 11 35 18 20 29 18 20 25 28 23 26 27 22 28 26 29 28 29 29 31 39 36 32 32 33 32 36 28 35 38 37 35 35 29 28 30 28 28 25 25 26 26 24 26 26 27 900 MHz L typ Q typ 1.67 1.83 2.22 3.31 3.72 3.95 4.32 4.72 4.93 5.77 6.75 7.70 8.25 8.86 9.70 10.0 11.0 12.3 15.4 16.2 18.7 22.8 24.1 24.5 29.2 31.4 36.0 39.4 42.7 47.0 52.2 55.5 62.5 80.5 82.0 96.2 124 138 166 250 305 -- -- -- -- -- -- -- 49 35 31 75 53 49 50 47 47 63 60 60 82 62 59 66 53 72 64 55 70 73 71 45 74 47 67 47 60 44 62 69 56 54 53 54 49 43 39 25 22 -- -- -- -- -- -- -- 1.7 GHz L typ Q typ 1.65 1.86 2.24 3.38 3.71 3.96 4.33 4.75 4.95 6.05 7.10 7.82 8.37 9.32 9.92 10.6 11.5 13.5 16.8 17.3 21.4 26.1 28.0 28.7 34.6 39.9 49.5 52.7 60.2 64.9 77.2 82.2 97 168 135 177 -- -- -- -- -- -- -- -- -- -- -- -- 63 50 44 88 65 67 70 57 56 80 81 65 87 58 61 83 56 83 89 52 69 71 67 39 65 28 42 24 40 21 35 34 26 21 20 21 -- -- -- -- -- -- -- -- -- -- -- -- SRF min4 (MHz) DCR max5 (Ohms) Imax (mA) Color code >5000 >5000 >5000 >5000 >5000 >5000 >5000 >5000 >5000 4760 4660 4320 3880 3680 4100 3860 3640 3220 3020 3040 2680 2380 2380 2380 2380 2240 1900 1960 1740 1580 1560 1560 1480 1380 1360 1300 1140 1080 1020 900 820 800 780 760 740 700 620 580 0.022 0.045 0.240 0.045 0.063 0.080 0.063 0.116 0.140 0.075 0.110 0.106 0.115 0.109 0.135 0.130 0.130 0.130 0.170 0.170 0.170 0.190 0.190 0.190 0.220 0.220 0.220 0.250 0.250 0.280 0.280 0.270 0.310 0.340 0.490 0.540 0.580 0.610 0.650 0.915 1.25 1.98 2.06 2.10 3.55 2.30 3.89 4.35 1800 700 100 700 1160 700 1160 700 700 700 700 800 700 700 700 700 700 700 700 700 700 700 700 700 600 600 600 600 600 600 600 600 600 600 400 400 400 300 300 280 240 200 200 200 120 170 100 100 Red Black Yellow Blue Red Brown Orange Violet Green Black Red Brown Orange Yellow Blue Orange Gray Yellow Green White Blue Violet Orange Black Gray Brown White Red Black Orange Brown Blue Red Orange Yellow Green Blue Violet Gray White Black Green Gray Brown Violet Red Blue Yellow 1. When ordering, please specify tolerance and testing codes: ML312RAAR39JLZ Tolerance: G= 2% J = 5% Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10003 C = Custom screening (please specify when ordering) 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured at the same frequency as inductance using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent and a Coilcraft SMD-D test fixture. 5. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF1010 test fixture. 6. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface (R) Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 (c) Coilcraft, Inc. 2010 Document ML195-2 Revised 12/09/10 Phone 800-981-0363 Fax 847-639-1508 E-mail cps@coilcraft.com Web www.coilcraft-cps.com